Miniaturized N64 Controller Fits The Tiniest Of Hands

April 22, 2012 by Mike Nathan 27 Comments

n64-controller-mod

The controllers that came with the Nintendo 64 don’t exactly measure up to the “Duke” of Xbox fame, but they’re not the smallest in the world either. Made by Bacteria forum member [Bungle] says that his girlfriend has incredibly tiny hands, so he thought he might try trimming some of the fat from an N64 controller by cramming its components into an N64 cartridge.

He tore down a 3rd-party N64 controller, tossing out the D-Pad, plug, and rumble motor, retaining all of the other buttons. After gutting the game cartridge, he heated the back side under a lamp and stretched the plastic over a roll of electrical tape to make room for the N64’s trademark “Z” button. Having only removed the rumble motor due to size constraints, he found a suitable replacement at Radio Shack, which fills in for the original nicely.

After a good amount of careful trimming, wiring, and mounting, he came up with the little gem you see above. We’re sure [Bungle’s] girlfriend is pleased with his work, and he seems happy with how it came out as well.

Continue reading to see a short video showing off [Bungle’s] latest creation.

[Thanks, Chris Downing]

Continue reading “Miniaturized N64 Controller Fits The Tiniest Of Hands” →

Reading Credit Cards With A Tape Head

April 18, 2012 by Brian Benchoff 103 Comments

A company called Square is giving out free credit card readers that turn any iPhone or iPad into a Point of Sale terminal. [Steve] got a hold of one of these tiny peripherals and did what any sane person would do: tear it apart and learn how it works. This bit of hardware is a little unimpressive; unsurprising because Square is giving them away. With simplicity comes an ease in understanding, and [Steve] was able to successfully read his own credit card with this tiny and free credit card reader.

[Steve]’s work in decoding credit card data builds off [Count Zero]’s article from the bbs days. Basically, each credit card has two or three tracks. Track three is mostly unused, whereas track one contains the card holder name, account number, cvc code and other ancillary data. Track two only contains the credit card number and expiration date.

The only components in the Square card reader are a head from a tape player and a 1/8″ microphone jack. The magnetic head in the Square card reader is positioned to only read track two. With a small shim, it’s possible to re-align the head to get the data from track one. After recording an audio file of him sliding his card though the Square reader, [Steve] looked at the number of times the waveform flipped from positive to negative. From this, he was able to get the 1s and 0s on the card and converted them to alphanumeric using the 6-bit ANSI/ISO alpha format.

[Steve] isn’t going to share the code he wrote for Android just yet, but it should be relatively easy to replicate his work with the Android tutorial he used. Also, yes, we did just pose the question of how these Square credit card readers work just hours ago. Good job being on the ball, [Steve]. Tips ‘o the hat go out to [Bobby], [Leif], [Derek] and anyone else we might have missed.

EDIT: [Stephen] sent in his teardown minutes after this post went live. Hackaday readers are too fast at this stuff.

An ITunes Rating Box For Everyone

April 14, 2012 by Brian Benchoff 15 Comments

If you’ve ever scoffed at the idea of opening up iTunes every four minutes to rate a song, [Steve] is the guy to talk to. He built a small hardware box with five illuminated buttons to rate the current song playing on iTunes.

This build comes after [Steve]’s earlier Arduino-based rating box that was functional, but didn’t have the level of polish he desired. To get to the current iteration, [Steve] designed a custom board around a PIC18F microcontroller programmed as a USB HID device. After a great deal of frustration soldering teeny SMD components, [Steve] had a functioning USB five-star iTunes rating box. With a custom acrylic case the build was finally completed.

We’re very impressed with the finished version of [Steve]’s TuneConsole, as he calls it. We can certainly imagine other people wanting a similar device. Whether that comes from releasing the schematics and boards or selling PCBs on Seeed Studio is something we’re eager to find out.

Separating A Working Scanner From Its Broken Printer

April 11, 2012 by Mike Szczys 17 Comments

The laser printer portion of this all-in-one machine gave up the ghost and [Entropia] couldn’t get it working again. But the scanner was still functioning so he decided to separate the scanner from its dead printer module.

The model in question is a Samsung SCX-4200. The design is actually perfect for separation because the scanner sits on top of the out feed tray of the printer. It can even be lifted to allow more room for printed pages to pile up. All he has to do is separate the hinged connector and reroute the flat cables. But the real question in [Entropia’s] mind was whether or not the control board would work without the laser printer components connected to it.

He carefully disassembled the unit, spilling toner here and there which is left over from a catastrophic knock-off toner cartridge incident. A quick test showed him that although the drivers complain that the paper tray is open, the scanner does still work. He glued the controller board seen on the left to the bottom of the scanner enclosure, and added some felt feet. Now his scanner is closer to the size you’d expect. And on the plus side he gained a geared stepper motor, laser scanning unit, exhaust fan, and a couple of solenoids to use in future projects.

Trumpet Hero

March 29, 2012 by Mike Szczys 4 Comments

[Evilsigntist] combined an old cornet with an old PS2 guitar hero controller to produce the Trumpet Hero. The fragile looking conglomeration really brings a smile to our faces. Just make sure the instrument has already seen the end of its days before drilling holes to mount the various parts.

In the image above you can see that the three valve buttons have been painted to correspond to frets on the original guitar controller. The orange and blue frets are positioned for the left hand to operate. There seems to be a couple of different version because there is a diagram showing a mute in the bell that can be twisted for whammy bar input, but that’s not shown here. Strumming is accomplished by blowing through the mouthpiece, but as you can see in the video after the break, no buzzing is necessary.

Using actual instruments as game inputs is a lot of fun. We always think back to the flute and drum set controllers for Rock Band.

Continue reading “Trumpet Hero” →

Doppler-effect Lets You Add Gestures To Your Computer

March 21, 2012 by Mike Szczys 40 Comments

What if you could add gesture recognition to your computer without making any hardware changes? This research project seeks to use computer microphone and speakers to recognize hand gestures. Audio is played over the speakers, with the input from the microphone processed to detect Doppler shift. In this way it can detect your hand movements (or movement of any object that reflects sound).

The sound output is in a range of 22-80 kHz which is not audible to our ears. It does make us wonder if widespread use of this will drive the pet population crazy, or reroute migration paths of wildlife, but that’s research for another day. The system can even be used while audible sounds are also being played, so you don’t lose the ability to listen to music or watch video.

The screen above shows the raw output of the application. But in the video after the break you can see some possible uses. It works for scrolling pages, double-clicking (or double-tapping as it were), and there’s a function that detects the user walking away from the computer and locks the screen automatically.

[Sidhant Gupta] is the researcher who put the video together. In addition to this project (called SoundWave) he’s got several other interesting alternative-input projects on his research page. Continue reading “Doppler-effect Lets You Add Gestures To Your Computer” →

Software Defined Radio From A USB TV Capture Card

March 20, 2012 by Brian Benchoff 48 Comments

With a simple digital TV USB capture card, you can build your own software defined radio or spectrum analyzer. While it may not be as cool as [Jeri Ellsworth]’s SDR, it’s still very useful and only requires $20 in hardware.

The only piece of hardware required for this build is a USB FM/DTV capture device with the Realtek RTL2832U chipset. So far, two USB sticks have been tested and the unit with the largest frequency range (64 – 1700 MHz) is available direct from China for $20.

Turning these cheap capture cards into software defined radios and spectrum analyzers was discovered by [Antti Palosaari] after sniffing the device. These cards demodulate the frequency and send all the data to the computer and is decoded via software. If you have one of these capture cards lying around, you can grab the software and load it up on your *nix box. Right now, the software only writes directly to a file, and may drop a few samples if writing to a hard disk instead of ram. Small problems, but we’re sure this project will pick up steam in the very near future.

via reddit