Giving Siri The Keys To Your House

October 24, 2011 by Mike Szczys 30 Comments

We haven’t really covered many hacks having to do with Apple’s newest iPhone feature Siri. We’d bet you’ve already heard a bunch about the voice-activated AI assistant and here’s your chance to give it the keys to your house. This project uses Siri to actuate the deadbolt on an entry door in a roundabout sort of way.

This is really just a Siri frontend for an SMS entry system seen in several other hacks. The inside of the door (pictured above) has a servo motor mounted next to, and attached via connecting rod with, the lever-style deadbolt. An Arduino equipped with a WiFly shield controls that servo and is waiting for instructions from the Google app engine. But wait, they’re not done yet. The app engine connects to a Twilio account which gives it the ability to receive SMS messages. Long story short; Siri is sending a text message that opens the door… eventually. You can seen in the demo after the break that the whole process takes over twenty seconds from the time you first access Siri to the point the bolt is unlocked. Still, it’s a fine first prototype.

There’s a fair amount of expensive hardware on that door which we’d like to see converted to extra feaures. [CC Laan] has already added one other entry method, using a piezo element to listen for a secret knock. But we think there’s room for improvement. Since it’s Internet connected we’d love to see a sensor to monitor how often the door is opened, and perhaps a PIR sensor that would act as a motion-sensing burglar alert system.

Don’t need something this complicated? How about implementing just the secret knock portion of the hack?

Continue reading “Giving Siri The Keys To Your House” →

RF Sniffing On-the-go

October 8, 2011 by Mike Szczys 2 Comments

It’s been a while since we checked in on [Travis Goodspeed]. His latest post makes RF sniffing with the Next HOPE badge more portable by ditching the need to display data on a computer. He’s built on the work he did at the beginning of the year, replacing the FTDI chip on the badge with a Bluetooth module. Now he can use his Nokia N900 as a GoodFET terminal to not only display the packets pulled from the air, but the control the badge as well.

Previously, the client running on the computer was communicating with the badge via a serial connection. To get it working on the N900 [Travis] transitioned from using py-serial over to using py-bluez. All of the code changes are available from the GoodFET repository.

He’s got a few other tricks planned for this concept. He put in a parts order to add Bluetooth to the Girltech IM-ME. The pretty pink pager has the same radio chip on board, so adding Bluetooth connectivity will allow it to be used in the same way. There are also plans in the works to add a couple other packet sniffing protocols to the bag of tricks, including ZigBee.

Hackerspace Competition Combines Drinking And Lock Picking – Need We Say More?

October 7, 2011 by Mike Nathan 8 Comments

rumble_challenge_lockpicking_contest

The guys from Bloomington’s Fraternal Order of Lock Sport (FOOLS) sure know how to throw a party! At this year’s DerbyCon event down in Louisville, the group put on an awesome event that combined lockpicking and drinking – what could be better?

The Rumble Challenge is lock picking game where six people compete head to head for the best time. Whenever a competitor masters his lock, the competition is paused so that each player has a chance to take a shot from their air-powered shot dispensing machine. Once everyone has imbibed, the next round starts with the competitors picking up where they left off, in an effort to be the next to successfully open his lock.

The game is controlled by an Arduino, which both times the competition and senses when the locks have been opened. The Arduino relays this data to a computer, which uses a projector to display the contestant’s scores on a big screen. As an added bonus, FOOLS member [dosman] added loud rumble motors to the locking mechanisms in order to throw competitors off their game.

The contest sounds like a ton of fun – we’re bummed that we missed it. If you want to see how the game was put together, check out [dosman’s] build log over at the Bloominglabs wiki.

WiFi Jamming Via Deauthentication Packets

October 4, 2011 by Mike Szczys 109 Comments

[Elliot] put together an intriguing proof-of-concept script that uses repeated deauthentication packet bursts to jam WiFi access points. From what we can tell it’s a new way to use an old tool. Aircrack-ng is a package often seen in WiFi hacking. It includes a deauthentication command which causes WiFi clients to stop using an access point and attempt to reauthenticate themselves. [Elliot’s] attack involves sending repeated deauthenitcation packets which in essence never allows a client to pass any data because they will always be tied up with authentication.

After the break you can see a video demonstration of how this works. The script detects access points in the area. The attacker selects which ones to jam and the script then calls the Aircrack-ng command. If you’ve got an idea on how to protect against this type of thing, we’d love to hear about. Leave your thoughts in the comments.

Continue reading “WiFi Jamming Via Deauthentication Packets” →

Fake PS3 Tracks Thieves All The Way Home

September 30, 2011 by Mike Nathan 73 Comments

ps3_tracking_system

One of [Wayne’s] relatives had their house robbed during a blizzard/extended power outage, and as is typically the case, none of the stolen items were recovered. His nephew’s PS3 was among the pilfered belongings, which didn’t sit well with him. Taking a cue from police “bait cars”, he thought it would be cool to fit a dummy game console with a tracking device, should anything similar happen in the future.

He bought a hollowed out PS3 shell on eBay, filling it with an Arduino, an accelerometer, a GPS sensor, a small GSM modem with a prepaid SIM card, and a reasonably sized LiPoly battery. The system usually sits in a sleeping state, but when the accelerometer senses motion, the Arduino powers up the GSM modem and sends an SMS security alert to his mobile phone. Using his phone to control the tracking system via SMS, he can request GPS coordinates and directional information, which can then be relayed to the police.

His tracking system is a great idea since hawking stolen game consoles are easy money for thieves. If there happens to be a string of robberies in your neighborhood, you could certainly rest a little bit easier knowing that your Playstation doppelganger will let you know if someone is looting your house.

Passive RFID Tag Cloning

September 30, 2011 by Mike Szczys 34 Comments

Here’s an open source RFID cloner design that is about the same size as a standard RFID key card. It doesn’t need a battery to capture key codes, just the magnetic field generated by an RFID reader. You can see the functionality demonstrated in the video after the break. By holding the bottom button as the cloner is moved in range of the RFID reader, the microcontroller goes into learning mode. Now just hold up the card you wish to clone and the LED just above the buttons will light up when it has captured the code. Now the device will act just as the original RFID tag did.

This was developed by [Ramiro], the same person who built the barebones RFID emulator we saw a few days ago. When researching that story we complete skipped over this gem. He’s posted a ton of information on the tag itself. It doesn’t look like he has any PCBs or kits left, but the schematic and code are available for download. You should check in on the design considerations section because it discusses the read/write function that isn’t built into the current version. That’s why you see some add-on components on the hardware used in the demo video.

It seems like this is a lot more user-friendly than the last RFID spoofer we looked at.

Continue reading “Passive RFID Tag Cloning” →

Easily Movable RFID Door Lock Is Great For Dorm Rooms

September 19, 2011 by Mike Nathan 15 Comments

One of the first things that [Eric] hacked together when he got to college was an RFID door locking system. He found that he was often in a rush to get in and out of his dorm room, and that using a simple wireless key was a great way to streamline his days.

Over the years, he has refined his design, and while his original prototype was functional, it was a bit rough around the edges. In the video posted on his site, he thoroughly explains how his system was built, and shows off the revisions he has made over time. One key consideration when building this system was the fact that the installation had to be non-permanent. Since schools typically frown on physically altering your rooms, he found a non-intrusive means to mount his system in the way of zip ties and foam board.

His RFID door lock looks to work quite nicely, and we especially like the inclusion of the reed switch to ensure that the system knows if the door has been opened or not. If you have about half an hour to spare and are interested in building an RFID entry system of your own, be sure to check out [Eric’s] video below for all the details.

Continue reading “Easily Movable RFID Door Lock Is Great For Dorm Rooms” →