Stop Motion Water Droplets

March 1, 2014 by Brian Benchoff 22 Comments

logo

The folks at Physalia studio were asked by a company called IdN to produce a little bit of video with a logo. After tossing a few ideas around, they hit upon the concept of projecting the IdN logo inside a falling water droplet. CGI would never get this idea right, so the finished product is the result of stop-motion animation created inside several thousand falling drops of water.

Taking a picture of a falling water droplet was relatively easy; a small drip, a laser pointer and photodiode, and a flash trigger were all that was needed to freeze a drop of water in time. The impressive part of the build is a motion control system for the camera. This system moves the camera along the vertical axis very slowly, capturing one water droplet at a time.

Behind the droplet is a an animation that’s seemingly inspired by a Rorschach test, ending on the IdN logo. The frames for these animations were printed out and placed inside the test chamber/studio upside down to account for the optical effects of a sphere of water.

The end result is a product of over 20,000 pictures taken, all edited down into a single 30-second shot. An amazing amount of work for such a short video but as you can see in the videos below, it’s well worth the effort.

Continue reading “Stop Motion Water Droplets” →

The Rabbit’s Hole: Creative Reuse And Stop Motion Animation

November 9, 2013 by Adam Fabio 3 Comments

rabbitshole

The folks down at The Rabbit Hole Hackerspace have been busy lately. They’ve created an amazing stop motion animation short titled “The Rabbit’s Hole”. The three-minute film documents the journey of a white rabbit through several strange lands, including the court of a “hormonally imbalanced queen”, the sewers, a PCB wasteland, and a banana jazz concert. The rest of the video is a behind the scenes view, showing the incredible amount of teamwork that went into the film’s creation.

From set building to final photography, the entire film was shot in one day. The set was split into 8 pieces. Each piece represented a scene the rabbit would journey through in the final movie. Members of The Rabbit Hole were able to work in parallel, each designing their own section of the set. Once the photography was done, [Whisker] took over for the process of editing and sound design. Just like in Hollywood, post production took much longer than the actual shoot.

The amazing part of the video is that most of the characters and set pieces are created from The Rabbit Hole’s junkbox. Even the star of the show, a 3D printed Rabbit wasn’t immune. Many rabbits were printed for the stop motion animation process. As can be expected, there were a few failed prints. Those prints became Rabbit footed Lamps, Tables, and a rather macabre rabbit’s hand in a tray. Even the camera dolly was welded up from some scrap metal and old roller blade wheels.

We like the way the entire hackerspace was able to come together to create something greater than any one of them could have done alone. This sort of project should be a template for other hackerspaces to follow.

Continue reading “The Rabbit’s Hole: Creative Reuse And Stop Motion Animation” →

Camera Dollies Hacked Together By Stop Motion Filmmakers

August 29, 2012 by Mike Szczys 3 Comments

A little bit of technology goes a long way when it comes to stop motion animation. In this case it’s a trio of simple camera dollies built during production of a short film called The Maker.

A Dolly is a method of mounting the camera so that it can be moved smoothly during a shot. Of course with stop motion the movement actually happens between the shots so it’s even more important that the camera be moved accurately. The video after the break shows off how they added CNC control for the camera. The first dolly was built from a pair of PVC pipes with a sled that moves along them. A motor moves a loop of 35mm film which is attached to the dolly. This is a great choice of materials since it doesn’t stretch and it’s free (one of the filmmakers is a projectionist). The next dolly is made from a flatbed scanner, and the final offering is seen above. Built from a bicycle wheel it provides a stationary platform above the hub for the models, while the camera rotates on an arm attached to the wheel. You can watch the complete film here.

If you’re looking for more inspiration check out this dual-axis PVC dolly project.

Continue reading “Camera Dollies Hacked Together By Stop Motion Filmmakers” →

Stop Motion Animation Creation

April 23, 2012 by Jeremy Cook 4 Comments

Stop Motion Animation has always been interesting to me since I “discovered” that one could make animated flip books by drawing each frame a little different. Fast forward 20 years or so, and computer technology has gotten to the point where this sort of thing can be done electronically quite easily and at an incredibly low price of a camera, computer, and free or paid-for software (here’s the technique using GIMP, a free, good quality photo editing tool) to put everything together.

The frames in the picture above are of my latest [PVC man] animation, which can be made with some electroluminescent lights, gloves, and some PVC pipe. Each frame was individually photographed, and after several hours of work we had enough footage for 17 seconds of so of stop-motion animation.

Although by no means perfect, the quality of these animations has gone up dramatically from the first animations that I made using an old ENV2 camera phone. Although I was using a “custom mount” for it, it’s amazing these came out as well as they did. As with everything hacking related, this process is a constant work in progress. Check out the videos after the break for the [PVC man] video as well as one of the early ENV2-produced stop-motion shorts!

Continue reading “Stop Motion Animation Creation” →

Hackaday Links: April 11, 2012

April 11, 2012 by Brian Benchoff 17 Comments

This hurts our head

You know you can ‘freeze’ drops of water in mid-air by flashing a LED at the right time, right? Well, according to this video you don’t even need a strobing light; just use the frame rate of the camera. Much cooler if you don’t know how it works, in our humble opinion.

Now do Junkyard Wars!

[James Cameron] and [Mark Burnett] (the guy who created Survivor) are bringing Battlebots back to the Discovery Channel. The new show is called Robogeddon and calls upon the current talent in the fighting robot world. Our prediction? Someone is going to build an amazing piece of art that will be completely destroyed in the first round; a wedge with wheels will take the championship.

A steam engine made out of rocks

[Hansmeevis] just spent 230 hours hand carving a steam engine out of gems. It’s called “Dragon’s Breath” and it’s an amazing piece of work: the cylinder is carved out of quartz, while the flywheel, mount, and base are carved out of jasper, onyx, zugalite, and other semi precious gems. Amazing artistry and it works.

Don’t lose a finger on all that science over there

[Dr. W] is a science teacher in Saint-Louis, France. Next year, his students will be learning about reaction propulsion and impulse conservation. To demonstrate these properties, [Dr. W] hacked up an old vacuum cleaner in to a jet engine and built a Pitot tube to measure the 140 km/h wind speed. Google translation.

Circuit bending a Sega Saturn

Making cool glitched-up graphics from Ataris and Nintendos is old hat, but not much has been done with circuit bending slightly more modern consoles. [big pauper] found his old Sega Saturn in his grandma’s attic and wondered what secrets this forgotten box held. It turns out he can make some pretty cool sounds and even cooler glitched out graphics. The pic above is from Virtua Fighter; done correctly these glitched low-polygon graphics could easily find themselves in a very stylistic indie game.

Burning Man 2011: Peter Hudson’s Charon Strobe Sculpture

September 16, 2011 by Jesse Congdon 20 Comments

Here at Hackaday the only thing we like better than giant whirling artistic desert based contraptions are interactive giant whirling artistic desert based contraptions. [Peter Hudston]’s Charon is no exception. Known for his strobe sculptures [Peter] has returned from a two year hiatus with possibly one of the craziest and nightmarish sculptures found on the deep playa. The work features a gigantic spinning wheel that has posed human skeletons mounted on it’s inner edge. Onlookers can pull a series of 6 rope pairs which cause the wheel to rotate rapidly. When the rope pullers are coordinated enough to get the wheel spinning at the right speed, a strobe is activated revealing the skeleton’s animation.

I wandered over to this thing one night after hearing the local buzz about the piece. The towering wheel was spinning away as the rope pullers of the moment tried desperately to get the strobe to activate, every couple of minutes or so somebody would try and coordinate the pulling only to confuse things. From my perspective it seemed to be very difficult to get the right speed, and the pullers had to yank the rope practically to the ground. During the short time I was watching the piece (jaw to the floor) the strobe activated once or twice and honestly it was completely worth the effort. To see what this monster looks like in action check out the video after the jump.

Continue reading “Burning Man 2011: Peter Hudson’s Charon Strobe Sculpture” →

Candle Stop Motion: How’s It Done?

June 18, 2010 by Mike Szczys 55 Comments

[Ollie] tipped us off about a stop motion video that uses a grid of tea candles to animate some classically pixellated game graphics. The image above is obviously a game of pong in progress. It’s interesting to watch but for us the fun is trying to decide how it’s done. Click through the break to see the video and discuss the methodology.

Continue reading “Candle Stop Motion: How’s It Done?” →