Month: December 2013

Fubarino Contest: Persistence Of Vision Clock

December 21, 2013 by 19 Comments

propellerck5

The best part of these contests is that we get people to actually show off what they’ve been working on! Check out the POV clock which was sent in by [Taciuc]. He doesn’t have a webpage for it, but he did send a video which you can see after the break.

The project is a home-etched PCB with a long row or surface mount LEDs. The board is spun by a stepper motor which takes a little while to stabilize. But once it does it’s a twirling package of awesomeness. A PIC 16F628 drives the device, with a separate RTC chip to keep time. There’s also an IR receiver to facilitate user control. Our URL is displayed on the clock face itself and we think it’s always shown. But there is an easter egg in the code itself. If you try to dump the firmware from the chip you’ll see our web address in the hex output. Here’s his project archive if you want to the HEX, ASM and DipTrace schematic.

This is an entry in the Fubarino Contest for a chance at one of the 20 Fubarino SD boards which Microchip has put up as prizes!

Continue reading “Fubarino Contest: Persistence Of Vision Clock” →

An Opensource Arduino Guitar Pedal

December 21, 2013 by 25 Comments

If you’re a guitarist, or know a guitarist, you probably know just how many guitar effects there are out there — but what if you could design your own effects?

[J Rodriguez] has just released his opensource Arduino guitar pedal shield, dubbed the pedalSHIELD. He designed it as a platform to learn about digital signal processing, effects, and synthesizers — without needing an in-depth knowledge of electronics or programming. It allows you to design your own effects in C/C++, or download from his own library online. Some of the downloadable presets include an octave pedal, reverb pedals, delay pedals, and even distortion pedals!

The pedal features three programmable potentiometers, two main switches, and the foot pedal switch. The shield plugs directly into an Arduino Due, and you can find all the schematics here and the parts list here. It was completely designed in KiCad which is an open source electronics CAD design suite.

Take a listen after the break to hear the pedal in action!

Continue reading “An Opensource Arduino Guitar Pedal” →

NESPoise – A Nice Looking NES Clone

December 21, 2013 by 9 Comments

[Dave] tipped us about the latest project he just finished: a posable, desktop NES clone arcade machine. This idea came to be when its creator gathered a few bits and pieces he had lying around: an NES Retro Entertainment System (Retrobit RES, found for less than $25) and an arcade stick with its buttons. [Dave] then bought a 7″ car DVD screen (less than $40) and started a first standard arcade-looking design with OpenSCAD. As the first draft was relatively boring, he let it mature for a bit until he got another idea, shown in the picture above.

The final result is made of 3D printed PLA and varnished luaun plywood which gives the console a VCS style retro look. Many hours were required to 3D print the different parts using a Makerbot Replicator 2. [Dave] disassembled his Retrobit RES to layout its parts inside the case and  also replaced the original voltage regulator with a 7805 on a big heatsink. This may be one of the best ‘nintendo’ hacks we have received over the years, but there have been others that also take cartridges.

Full-size Lego Car Can Hit 30km/h!

December 21, 2013 by 20 Comments

[Steve Sammartino] is a Melbourne entrepreneur, and he had an idea: could it be possible to design and make a functional full-size Lego car?

He sent out a single tweet to try to crowd fund the project:

Anyone interested in investing $500-$1000 in a project which is awesome & a world first tweet me. Need about 20 participants…

Not one, not two, but forty Australians pledged money to start this crazy idea dubbed the #SuperAwesomeMicroProject. With the money raised, [Steve] and [Raul Oaida] purchased over 500,000 Lego pieces and began the build in Romania, where [Raul] lives.

Now before you get too excited, the car is not “fully” made out of Lego. It features real tires and some select load bearing elements. That being said, the entire engine is made completely out of Lego. It features four orbital engines utilizing a total of 256 pistons. The top speed they tested it to was about 20-30km/h — it might go faster, but they didn’t want to risk a catastrophic failure.

Since its completion (it took nearly 18 months to build), it’s been shipped back to a secret location in Melbourne, but the team has made an excellent video showcasing the project. Stick around after the break to see your childhood dreams come to life.

Continue reading “Full-size Lego Car Can Hit 30km/h!” →

Fubarino Contest: Hackaday Tells You You’re A Terrible Pilot

December 21, 2013 by 6 Comments

glider

[Mikko] is in to flying F3B racers – remote control airplanes with a three meter wingspan. These races require the pilot to know how much time he has left, and when flying a remote controlled airplane to the edges of visual contact, it’s just not possible to look down and check a stopwatch.

To solve this problem, [Mikko] created a talking F3B timer to announce the flight time and how much time is left in 30 second increments. It’s based on a WTV020 audio module that plays audio from an SD card.  Right now it’s just in the prototype phase, but he does have some code and documentation online.

As for the easter egg, [Mikko] programmed his timer so that if the flight lasts exactly 33 seconds (with millisecond resolution), the Hackaday URL is displayed on the Nokia LCD. We’re betting a flight time of 33 seconds would be highly correlated with a horrible malfunction and the loss of a thousand dollar airframe, so we’re more than happy to cheer [Mikko] up if he eventually sees this easter egg in the field.

Video of the talking timer speaking Finnish below, and a video showing off what these huge sailplanes can do right here.

This is an entry in the Fubarino Contest for a chance at one of the 20 Fubarino SD boards which Microchip has put up as prizes!

Continue reading “Fubarino Contest: Hackaday Tells You You’re A Terrible Pilot” →

DARPA Robotics Challenge Trials Day 1

December 20, 2013 by 16 Comments

darpa-val1

Today was the first of two days of trials at the DARPA Robotics challenge at Homestead-Miami Speedway in Florida. Created after the Japan’s Fukushima nuclear disaster, The robotics challenge is designed to advance the state of the art of robotics. The trials range from driving a car to clearing a debris field, to cutting through a wall. Robots score points based on their performance in the trials. Much of the day was spent waiting for teams to prepare their robots. There were some exciting moments however, with one challenger falling through a stacked cinder block wall.

Pictured above is Valkyrie from NASA JPL JSC. We reported on Valkyrie earlier this month. Arguably one of the better looking robots of the bunch, Valkyrie proved to be all show and no go today, failing to score any points in its day 1 trials. The day one lead went to Team Schaft, a new robot from Tokyo based startup company Schaft inc. Schaft scored 18 points in its first day. In second place is the MIT team  with 12 points. Third place is currently held by Team TRACLabs with 9 points. All this can change tomorrow as the second day of trials take place. The live stream will be available from 8am to 7pm EST on DARPA’s robotics challenge page.

Continue reading “DARPA Robotics Challenge Trials Day 1” →

Hack Some Picks

December 20, 2013 by 33 Comments

lawlpicks

You know you can make your own lock picks out of cheapo carbon steel hacksaw blades, right? So what if you’ve tripped over this hack on every website that also tells you to read and worship the MIT Guide to Lock Picking; ’tis the season to pick up a new hobby now that many of us have some extra holiday free time. Unlike the authentic hand-crafted macrame indoor hanging vertical tomato garden you bought for that girl you’re trying to impress, hacksaw blades won’t cut into your purchasing power. Also, believe it or not, although we have thirteen picking hacks that are sitting in the “lockpicking” category, this isn’t one of them.

Though the guide chose to use existing picks as a template, there are plenty you can find online. After tracing the pick, the next step is to secure the hacksaw blade and carve out the excess with a rotary tool, then grind down the edges to remove any sharp bits. We recommend that you’re careful not to get the blade too hot here or you’ll alter its crystalline structure: perhaps one of our blacksmith-savvy readers can better explain what you should aim for and avoid when working with carbon steel. As usual, wear the necessary safety headgear: your eyes are valuable and you’ll need them to watch the video after the break.

What do you think? Should we make an effort at reviving the Lock Picking category? We know a lot of hackerspaces have lock picking events if you want to get into the dark art. Help us get things rolling by sending in tips recapping those events, as well as anything else that fits this theme.

Continue reading “Hack Some Picks” →