The Car Of Theseus Boldly Goes Where Many Cars Have Gone Before

August 8, 2022 by Matthew Carlson 45 Comments

We could all use a good chuckle every once in a while. [William Osman] revisited the ship of Theseus in a simplified manner. How many parts can you remove from a car and still be a car? (Video, embedded below the break.)

Of course, there are legal definitions of what a car is and a minimum set of requirements to be met to drive on the road. So, with two older cars ready for hacking and a group of hackers gathered, they split into two teams and started ripping parts of the vehicle. It becomes pretty humorous as it reminds us of many refactoring projects we’ve undertaken. For example, you move one BGA chip, and suddenly, it might be faster to reroute the whole board. Or you remove one component, you have to rip it out of three other modules, which affect four or more other modules, and so on. Accidentally cutting part of the electrical harness meant that one team had to dig further and further into the car to get back to a working car state. It was a race to get back to street legal while taking off more parts.

By the end of the exercise, they have a technically street-legal car they drove around, enjoying passersby’s pointed looks and confusion. They even take it to a dealership to see how much they could get for it. [William] points out that their abysmally low offer proves that a car with less stuff costs less. While we doubt that car manufacturers will follow his lead, it’s a good 15 minutes of fun.

We’ve got you covered if you’re interested in more minimal motoring.

Continue reading “The Car Of Theseus Boldly Goes Where Many Cars Have Gone Before” →

The SDWire board plugged into some SoM's breakout board's MicroSD socket

Automated MicroSD Card Swapping Helps In Embedded Shenanigans

August 8, 2022 by Arya Voronova 20 Comments

[Saulius Lukse] has been working on some single board computer, seemingly, running Linux. Naturally, that boots from a microSD card – and as development goes on, that card has to be reimaged all the time. Sick of constantly plugging and unplugging the microSD card between the SBC and an SD card reader, [Saulius] started looking for a more automated solution – and it wasn’t long before he found out about the SDWire project, a hardware tool that lets you swap a card between a DUT (Device Under Test) and your personal computer with no moving parts involved.

SDWire is an offshoot from the Tizen project, evidently, designed to be of help in device development, be it single-board computers or smartphones. The idea is simple – you plug your MicroSD card into the SDWire board, plug the SDWire into a MicroSD slot of your embedded device, and then connect a USB cable from the SDWire to your development computer. This way, if you need to reflash the firmware on the SBC you’re tinkering with, you only need to issue a command to the SDWire board over the USB cable, and the MicroSD card appears as a storage drive on your computer. SDWire is a fully open source project, both in hardware and in software, and you can also buy preassembled boards online.

Such shortening of development time helps in things like automated testing, but it also speeds your development up quite a bit, saving you time between iterations, freeing you from all the tiny SD card fiddling, and letting you have more fun as you hack. There’s a clear need for a project like SDWire, as we’ve already seen a hacker assemble such a device using breakouts.

Load Your Icebreakers, The 2022 Cyberdeck Contest Starts Now

August 8, 2022 by Tom Nardi 22 Comments

TL;DR: Enter the 2022 Cyberdeck Contest, starting right now!

When William Gibson first described the “cyberspace deck” used by the protagonists in Burning Chrome and Neuromancer, he offered only a few concrete details: they allow the user to explore cyberspace, are generally portable, and more adept owners often modify them to fit their particular needs. Anything else was left to the individual’s imagination, due in no small part to the fact that he author himself didn’t exactly know what the things would look like at the time. Still, not bad for a guy who was hammering it all out on a typewriter at the time.

Build your deck like Gibson is watching, because he is.

Now 40 years later, fact has caught up with fiction. The hacker and maker community have embraced the cyberdeck idea in a big way, and we’ve been blown away by the incredible creativity that goes into these bespoke computing devices.

Which is why we’re happy to announce the first, but very likely not the last, 2022 Cyberdeck Contest. Impress the judges with your Sprawl-ready rig, and you could claim one of three $150 USD Digi-Key shopping sprees to help fund your next cyberpunk masterpiece. You’ve got until Sept. 30, 2022.

So what is a cyberdeck, exactly? That’s a surprisingly difficult question to answer, but since we’re running a contest here, we’ll have to give it a shot…

It needs to be a computer of some sort, certainly. It should also serve a practical purpose; as impressive as your cosplay prop might be, we’re really looking for functional devices here. Nominally that means it will have a keyboard and some kind of display, but figuring out how it all connects and what form the components will take is where things get interesting.

Above all, it needs to be personal. What would your dream computer look like? What features would it have? There’s no right or wrong answer here — a good cyberdeck should be a reflection of the person who built it, and no two should ever be quite the same.

Need some inspiration? Not to worry, you’ve come to the right place. We’ve seen dozens of these custom machines over the last couple of years if you need some help to get moving in the right direction.

Continue reading “Load Your Icebreakers, The 2022 Cyberdeck Contest Starts Now” →

Cyberdeck Brainstorming Hack Chat

August 8, 2022 by Dan Maloney 5 Comments

Join us on Wednesday, August 10 at noon Pacific for the Cyberdeck Brainstorming Hack Chat!

If there’s one thing for sure about Hackaday, it’s that we keep a finger on the pulse of the hardware hacking community. Trends come and go, but they rarely slip by us, thanks to the constant supply of tips to hot projects that our loyal readers send in. It’s great to get a first look at these projects and see what kind of trends they represent, and to see how the community reacts to them. Some trends fade quickly, some catch on for a bit, and some really catch fire.

One trend that’s gotten pretty hot lately is the cyberdeck. Finding ways to squeeze a computer into a compact, field-ready package and make it useable is a challenge right off the bat. Adding the suite of sensors and peripherals that have become de rigueur for cyberdecks adds another level of complexity, and taking the build across the finish line with the proper cyberdeck aesthetic makes these gadgets super-fun to build and (hopefully) to use.

If cyberdecks sound like fun, you’re right! And to help us all get onboard the cyberdeck train, we’re going to mix things up with this Hack Chat. Rather than putting one person in the hot seat for our usual AMA-style discussion, we thought it would be fun to get everyone into a chat and brainstorm some cyberdeck designs. And to help seed the discussion, we’ve invited a bunch of hackers whose cyberdeck builds we’ve featured before:

[bootdsc], maker of the VirtuScope
[Back7], who popularized the Pi-in-a-Pelican style of cyberdeck
[a8ksh4], designer of the “chonky palmtop”
[I/O] and the Joopyter retro personal terminal
[cyzoonic], who upped the complexity with a watertight ruggedized cyberdeck

We’re not sure everyone will be able to make it, but we are sure that the more cyberdeck-adjacent people we have in the chat, the better. Whether you’re a veteran builder or just starting your first build, you’re going to want to stop by this Hack Chat and get in on the discussion. Particularly because we’re just kicking off our new Cyberdeck Design Contest in about an hour (spoiler!), and this’ll be a great way to get going!

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, August 10 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Hackaday Prize 2022: A Plasma Tweeter For Ultimate Clarity

August 8, 2022 by Jenny List 18 Comments

In the world of audio there are a huge variety of esoteric technologies which are rarely seen. One such is the plasma tweeter, a type of loudspeaker which generates sound by modulating a small electrical discharge. The benefit of this design comes in its delivering the closest possible to a point audio source, in effect the theoretical ideal speaker for treble frequencies. They’re a little hazardous due to the voltage but aren’t too difficult to make, as demonstrated by [Mircemk] whose version uses a recycled power pentode tube — which is how it showed up in the Hack it Back round of the Hackaday Prize.

It can be thought of as a cousin of the Tesla coil, with the same resonant oscillator but no capacity hat. Instead the top of the coil ends in a point, from which in the perfect speaker a ball of plasma replaces the Tesla’s impressive sparks. In this case the pentode is joined by a high-voltage TV line output transistor as a bias supply, which is in turn modulated with the audio through a small amplifier. It sometimes needs the plasma teasing out of it through discharge to a screwdriver, but the result is a very effective and clear plasma tweeter.

If plasma tweeters interest you, we’ve featured them before.

Martian Successes Reshape Sample Return Plans

August 8, 2022 by Tom Nardi 19 Comments

For as long as humans have been sending probes to Mars, there’s been a desire to return rock, soil, and atmosphere samples back to Earth for more detailed analysis. But the physics of such a mission are particularly demanding — a vehicle that could land on the Martian surface, collect samples, and then launch itself back into orbit for the return to Earth would be massive and prohibitively expensive with our current technology.

Instead, NASA and their international partners have been working to distribute the cost and complexity of the mission among several different vehicles. In fact, the first phase of the program is well underway.

The Perseverance rover has been collecting samples and storing them in 15 cm (6 inch) titanium tubes since it landed on the Red Planet in February of 2021. Considerable progress has also been made on the Mars Ascent Vehicle (MAV) which will carry the samples from the surface and into orbit around the planet, where they will eventually be picked up by yet another vehicle which will ultimately return them to Earth.

But there’s still some large gaps in the overall plan. Chief among them is how the samples are to be transferred into the MAV. Previously, the European Space Agency (ESA) was to contribute a small “fetch rover” which would collect the sample tubes dropped by Perseverance and bring them to the MAV launch site.

But in a recent press release, NASA has announced that those plans have changed significantly, thanks at least in part to the incredible success of the agency’s current Mars missions.

Continue reading “Martian Successes Reshape Sample Return Plans” →

PC Hardware Monitor Uses Tricorder-Derived Tech

August 8, 2022 by Tom Nardi 17 Comments

The visually striking hardware monitor that [Mangy_Dog] recently put together for his new custom PC build might look like something out of the Alien franchise, but the hardware he’s built it around actually comes from a very different science-fiction property: Star Trek. Or at least, from a very impressive line of Star Trek props, anyway.

Given the incredible amount of time and effort that [Mangy_Dog] has put into developing his Star Trek: Voyager tricorder, it’s no surprise that he would decide to reuse its graphics chip and microcontroller. But while the familiar hardware might have helped jump-start this build, this was no weekend project.

He’s steadily been working on it for several months now, and even entered it into the 2022 Sci-Fi Contest back in April. Obviously he wasn’t able to complete it before the Contest deadline, but looking at the final results, we’re happy to see he kept chugging away at it.

Of course, with a project like this, the hardware is only half the battle. In the video below, [Mangy_Dog] explains the challenges involved in creating not only the firmware that runs on the monitor, but the accompanying PC-side application. This included modifying existing libraries to add support for the device’s unique flash storage arrangement, and pulling the relevant system status information out of the operating system and into a series of customizable widgets.

As impressive as the project is, [Mangy_Dog] says he’s not done yet. A second revision of the hardware and software will address several issues and add new capabilities, and considering the high degree of polish we’ve come to expect from his creations, we’re not surprised

Continue reading “PC Hardware Monitor Uses Tricorder-Derived Tech” →