Real-Life Raspi-Controlled Redstone Lamp

November 16, 2013 by Marsh 2 Comments

redstone-lamp

Minecraft fanatics keep finding impressive ways to bring 8-bit components into the real world, and [Chris Tompson’s] Redstone Lamp Replica is no exception. [Chris] wanted to extend his connection to the game world by not only replicating this block, but also by controlling its light-up effect when an in-game cube is lit.

The lamp is a product of the gang at Hive76, who worked together to develop a quick prototype using the Minecraft Python client pyCraft, an Arduino, a transistor and a temporary papercraft lamp mockup. Hive76 member [Kyle] pitched in to write the plugin for pyCraft, which listens for an on/off message and sets one of the RasPi’s GPIO pins accordingly. The hardware for the actual lamp was designed to smooth out the 8-bit quality into something a bit more precise. The result are laser-cut pieces of MDF with a zebra wood veneer laminated on top. The interior was finished off with amber cathedral glass and then the cube’s sides were glued together. The RasPi, PCB and LEDs fit inside, all snugly affixed together.

Swing over to the Hive76 project page for more details and links to the plugin, and see the video demonstration below. For another Minecraft-inspired real-life project, check out [Bill’s] take on the BatBox.

Continue reading “Real-Life Raspi-Controlled Redstone Lamp” →

20 Android Tablets Form An Interactive Photo Collage

November 15, 2013 by Marsh 20 Comments

You might not have a small army of unused tablets lying around, but if you did, you should try turning them into what Minn calls a “Giant Interactive Photo Array Display:” A Giant IPAD. Har har.

[Minn’s] first step was to hit eBay, hoping to find a score of low-priced, broken-yet-easily-repairable tablets. The only ones available (and for cheap), however, were resistive touch screens with narrow viewing angles. After waiting patiently for nearly half a year, [Minn] hit the capacitive touch jackpot: snagging a pile of 10″ and 7″ Android tablets. The frame is custom made to provide a solid surface for mounting and enough depth for the tablets to fit correctly. Rather than form his own brackets to hold each device, [Minn] re-purposed some IKEA cupboard handles, screwing them into the MDF backboard and clamping the tablets to them with bolts that press against the case. An adhesive rubber bumper stuck to the top of the bolts prevents any damage.

Providing power to the diverse collection required another custom solution; two 5V 10A supplies and one 9V 16A supply fit into an accompany box safely deliver the needed juice. [Minn] chose an app that will grab photos from cloud storage so he can update the collection without having to dig around inside the frame. See the result in a video below! Want to try this project but only have one tablet to spare? The in-wall tablet mount might help.

Continue reading “20 Android Tablets Form An Interactive Photo Collage” →

Automated Aquarium Is Kitchen-Sinky

November 15, 2013 by Marsh 16 Comments

fishtankAutomation

People have been converting their old Power Macs and Mac G5s into fish tanks for a few years now, but [Hayden’s] Internet-enabled tank is probably the most awesome ever crammed into an aquarium along with the water and the fish—and we’ve seen some fascinating builds this summer. After gutting the G5 and covering the basic acrylic work, [Hayden] started piling on the electronics: a webcam, timed LED lighting, an LCD for status readouts, filter and bubble control via a servo, an ultrasonic sensor to measure water levels, thermometer, scrolling matrix display, an automatic feeding mechanism, and more. He even snuck in the G5’s old mainboard solely for a cool backdrop.

The build uses both a Raspberry Pi and an Arduino Mega, which sit underneath the tank at the base. The Pi provides a web interface written in PHP and jQuery, which presents you with the tank’s status and allows changes to some settings. Nearly every component received some form of modification. [Hayden] stripped the webcam of its case and replaced the enclosure with a piece of acrylic and a mountain of silicone, making it both waterproof and slim enough to fit in the appropriate spot. Though he decided to stick with an Amazon-bought Eheim fish feeder, he disabled the unit’s autofeed timer and tapped in to the manual “feed” button to integrate it into his own system.

It’d take half of the front page to explain the rest of this thing. We’ve decided to let the aquarium tell you the rest of its features in the video below. Yeah…it can talk.

Continue reading “Automated Aquarium Is Kitchen-Sinky” →

Arduino Astronomic Clock Automates Lights

November 15, 2013 by Marsh 32 Comments

[Paulo’s] garden lights are probably a bit more accurately automated than anyone else’s on the block, because they use latitude and longitude clock to decide when to flip the switch. [Ed Note from the far future: this page no longer exists, but you can still read it on the Wayback Machine. The TimeLord library has also been superceded, so you’ll have some porting to do.]

Most commercial options (and hobbiest creations) rely on mechanical on/off timers that click on an off every day at the same time, or they use a photosensitive element to decide it’s dark enough. Neither is very accurate. One misplaced leaf obscuring your light-dependent resistor can turn things on unnecessarily, and considering the actual time of sunset fluctuates over the year, mechanical switches require constant adjustment.

[Paulo’s] solution addresses all of these problems by instead relying on an algorithm to calculate both sunrise and sunset times, explained here, combined with swiftek’s Timelord library for the Arduino. The build features 4 7-segment displays that cycle through indicating the current time, time of sunset and of sunrise. Inside is a RTC (real time clock) with battery backup for timekeeping along with an Omron 5V relay to drive the garden lamps themselves. This particular relay comes with a switch that can force the lights on, just in case.

Check out [Paulo’s] project blog for the full write-up, links to code and more details, then take a look at some other home automation projects, like the SMS-based heater controller or occupancy-controlled room lighting.

Ask Hackaday: Can You Hack An Appliance Into A Spy Device?

November 13, 2013 by Marsh 96 Comments

crackinGoodTeapot

A story surfaced a few days before Halloween on Russian news site Rosbalt (yep, that’s in Russian), claiming Russian authorities intercepted Chinese-made electric irons and kettles: each equipped with microphones and WiFi. You can read a summary in English on the BBC’s website. The “threat” imposed by these “spy appliances” is likely the result of gross exaggeration if not downright fear mongering against Chinese-made products. It’s not worth our (or your) effort to speculate on what’s really happening here, but the situation does present a fun exercise.

Say you wanted to spice up your pen testing by altering a small home appliance: how easily could you build it? Let us know in the comments which appliance would serve as the best “host” for the modifications and what features you would include. Could you manage all the components listed in the article–a microphone, WiFi (any chance of cracking unsecured networks?), plus some vague indication that it “spreads viruses?” There’s a video below with a few glimpses of the electronics in question, but unless you speak Russian it probably won’t offer much insight.

Continue reading “Ask Hackaday: Can You Hack An Appliance Into A Spy Device?” →

Hacking And Philosophy: Hacker Crackdown Part I

November 11, 2013 by Marsh 6 Comments

hnpHackerCrackdownP1

This week’s installment of Hacking & Philosophy hits the books with [Bruce Sterling’s] Hacker Crackdown. If you’re joining us for the first time, you should check out last week’s conversation over The Mentor’s “Hacker Manifesto.” Don’t stop with the article, though, or you’ll miss out on the best part!

The contributions from our community are phenomenal, and it’s worth the effort to work through the comments. There are even a few replies from [The Mentor] himself.

Unfortunately, I can’t feature all of the excellent responses for lack of room, but I will recommend a handful that I feel are uniquely important after the break. Onward for more!

Continue reading “Hacking And Philosophy: Hacker Crackdown Part I” →

Freeside’s Infinity Portal

November 8, 2013 by Marsh 11 Comments

sidebyside

If infinity mirrors aren’t cool enough, the 10-foot-tall infinity portal should blow you away. Strictly speaking, the mirror itself is only 7’x4′, but you’ll still find yourself engulfed in the archway. The portal began as a simple prototype that we covered earlier this summer, which was just a frame of 2×4’s, some acrylic and LED strips. It works by putting lights between a two-way mirror and another mirror, reflecting most light internally and creating the illusion of depth.

The giant archway also began as a small-scale prototype, its shape and engravings carved out by a laser cutter. Once they were satisfied with its design, it was time to scale things up. The full-sized portal needed a a tremendous amount of stability, so the guys at Freeside built the base from wooden palettes. They needed the portal to travel to a few different venues, so the rest of the frame breaks down into components, including a removable wooden frame from which the acrylic hangs. A Teensy 3.0 runs all the WS2812 LED strips, which were chosen because each of their LEDs is individually addressable.

Check out the video below for an extremely detailed build log, which should give you a better idea of how massive and impressive this portal really is!

Continue reading “Freeside’s Infinity Portal” →