[Sprite_tm] has whipped up yet another interesting tutorial – software-based this time. He basically describes how he connected his Wiimotes to an HTPC. A USB Bluetooth receiver, and a little bit of Linux scripting, was all that was necessary to get the system up and running. To add to the fun, [Sprite_tm] configured a the controllers to work with MAME (an arcade machine emulator), allowing one to play Duck Hunt on a computer in its full glory!
Move over Steve and PEART… there’s yet another robotic drummer in town. [Fauzii] tipped us off to his own MIDI-controlled creation – WizardFingers. According to him, WizardFingers is already capable of 64th note rolls at over 250 beats per minute. That’s on every drum simultaneously. Each drum is hit with a lever attached to a linear pneumatic actuator. A laptop running MAX/MSP generates MIDI sequences, which are sent to Doepfer MTC64 board. All of these actuators are hooked up to the board, which sets them off in sequence.
[Fauzii] ultimately hopes to develop AI software that will allow WizardFingers to compose its own tunes on not only a drum kit, but bar chimes and an organ as well. His site documents the whole concept quite well (just watch out for wild cats).
[youtube=http://www.youtube.com/watch?v=gP_RhEstx_c]
Hacking is all about using parts and resources in an unconventional way. If stringing a pair of high-rise cranes with LED Christmas lights and making them move to a piece of classical music isn’t unconventional, then we don’t know what is. For nearly a quarter of every hour last night, 2 crane operators, along with two ‘choreographers’, swung and spun the cranes around in a coordinated fashion. The project was created by [Brandon Vickerd] as part of Nuit Blanche. Its purpose was to showcase the technology that builds the cities we live in. A live video stream from various viewpoints was projected on site, below the cranes.
[youtube=http://www.youtube.com/watch?v=FQrNmnU8kJk]
Want to be visible when cycling at night? [Neon Dean] came up with this possible solution, which he cruised on at Nuit Blanche. Its a bicycle with neon lights mounted on every surface possible. [Dean], who gave a similar treatment to his car, explained how it worked. All of the tubes take their power from a 12VDC battery he carries in a fanny pack. 12V is a far too low voltage to power the tubes, so a step up transformer is used to bring that number way up. [Dean] also decided to install a neon tube on each wheel. In order to deliver power to them, he mounted a rotor on each wheel, with two conductive tracks running close to the edge of each rotor. Two strips of steel act as brushes (in a manner similar to those on slot cars), and deliver the stepped-up power to the tubes. One creative, but perhaps not so bright, idea is [Dean]’s neon tube helmet.
[youtube=http://www.youtube.com/watch?v=idC8lyuBVHQ]
As part of Nuit Blanche, Toronto’s annual community art event, the CN Tower’s lighting system got put to some creative use. Installed 2 years ago, the RGB LED-based system is composed of 1330 individually addressable lights lining the glass elevator shafts. It costs just under $1000 to run almost every evening for a month. Named ‘Bright Lights Big City’ (not to be confused with the book, movie, or song of the same name), this project was coordinated by [Ryan Stec]. The lights on the tallest freestanding structure in North America were animated to CIUT 89.5 FM for the entire night. This innovative solution allowed one to appreciate the light show from almost anywhere in the city with access to a radio.
[youtube=http://www.youtube.com/watch?v=sQVycsOFSlc]
This year was not the first in which the City Hall of Toronto was lit up in a unique way. However, it was the first time that the government building was used to project 4-letter words. Brainchild of [D.A. Therrien], the 4LWM represents something that he imagined for a long time. [Therrien] built the huge sign in Scottsdale, Arizona, where he displayed it over the waterfront. He was later commisioned to bring the sign to Toronto for Nuit Blanche after making some adaptations (due to weather differences). The sign is composed of 4 huge 16-segment displays. Each segment is made of many neon light modules. This configuration makes it less noticable if one such module fails. The sign is controlled below from a computer, which allows it to display text and simple animations. It’s the first in a series of installations dubbed “Beautiful Light” by [Therrien]. Despite the name, no inappropriate language was displayed on the sign.
Some type of logger or sniffer exists for almost every form of electronic communication. Your keystrokes, phone conversations, and wireless networks could all be monitored. In this awesome proof-of-concept project, [James] expanded that array to include garage door openers. After receiving a piece of chain mail which stated that criminals have the technology to record any remote code and play it back, [James] wondered if he could build such a device that would work on at least his opener model. Continue reading “Garage Door… Packet Sniffer”
