Prusa Mini with endoscope nozzle cam and pip preview

Prusa Mini Nozzle Cam On The Cheap

May 2, 2025 by 2 Comments

Let me throw in a curveball—watching your 3D print fail in real-time is so much more satisfying when you have a crisp, up-close view of the nozzle drama. That’s exactly what [Mellow Labs] delivers in his latest DIY video: transforming a generic HD endoscope camera into a purpose-built nozzle cam for the Prusa Mini. The hack blends absurd simplicity with delightful nerdy precision, and comes with a full walkthrough, a printable mount, and just enough bad advice to make it interesting. It’s a must-see for any maker who enjoys solder fumes with their spaghetti monsters.

What makes this build uniquely brilliant is the repurposing of a common USB endoscope camera—a tool normally reserved for inspecting pipes or internal combustion engines. Instead, it’s now spying on molten plastic. The camera gets ripped from its aluminium tomb, upgraded with custom-salvaged LEDs (harvested straight from a dismembered bulb), then wrapped in makeshift heat-shrink and mounted on a custom PETG bracket. [Mellow Labs] even micro-solders in a custom connector just so the camera can be detached post-print. The mount is parametric, thanks to a community contribution.

This is exactly the sort of hacking to love—clever, scrappy, informative, and full of personality. For the tinkerers among us who like their camera mounts hot and their resistor math hotter, this build is a weekend well spent.

Continue reading “Prusa Mini Nozzle Cam On The Cheap” →

A Yamaha smart speaker, now with external DAC.

Smart Speaker Gets Brain Surgery, Line-Out

May 2, 2025 by 4 Comments

Sometimes you find a commercial product that is almost, but not exactly perfect for your needs. Your choices become: hack together a DIY replacement, or hack the commercial product to do what you need. [Daniel] chose door number two when he realized his Yamaha MusicCast smart speaker was perfect for his particular use case, except for its tragic lack of line out. A little surgery and a Digital-to-Analog Converter (DAC) breakout board solved that problem.

You can’t hear it in this image, but the headphones work.

[Daniel] first went diving into the datasheet of the Yamaha amplifier chip inside of the speaker, before realizing it did too much DSP for his taste. He did learn that the chip was getting i2s signals from the speaker’s wifi module. That’s a lucky break, since i2s is an open, well-known protocol. [Daniel] had an Adafruit DAC; he only needed to get the i2s signals from the smart speaker’s board to his breakout. That proved to be an adventure, but we’ll let [Daniel] tell the tale on his blog.

After a quick bit of OpenSCAD and 3D printing, the DAC was firmly mounted in its new home. Now [Daniel] has the exact audio-streaming-solution he wanted: Yamaha’s MusicCast, with line out to his own hi-fi.

[Daniel] and hackaday go way back: we featured his robot lawnmower in 2013. It’s great to see he’s still hacking. If you’d rather see what’s behind door number one, this roll-your-own smart speaker may whet your appetite.

3D Printed Spirograph Makes Art Out Of Walnut

May 2, 2025 by 9 Comments

Who else remembers Spirograph? When making elaborate spiral doodles, did you ever wish for a much, much bigger version? [Fortress Fine Woodworks] had that thought, and “slapped a router onto it” to create a gorgeous walnut table.

Hands holding a 3d printed sanding block, shaped to fit the grooves routed in the table which is visible in the background.
This printed sanding block was a nice touch.

The video covers not only 3D printing the giant Spirograph, which is the part most of us can easily relate to, but all the woodworking magic that goes into creating a large hardwood table. Assembling the table out of choice lumber from the “rustic” pile is an obvious money-saving move, but there were a lot of other trips and tricks in this video that we were happy to learn from a pro. The 3D printed sanding block he designed was a particularly nice detail; it’s hard to imagine getting all those grooves smoothed out without it.

Certainly this pattern could have been carved with a CNC machine, but there is a certain old school charm in seeing it done (more or less) by hand with the Spirograph jig. [Fortress Fine Woodworks] would have missed out on quite the workout if he’d been using a CNC machine, too, which may or may not be a plus to this method depending on your perspective. Regardless, the finished product is a work of art and worth checking out in the video below.

Oddly enough, this isn’t the first time we’ve seen someone use a Spirograph to mill things. It’s not the first giant-scale Spirograph we’ve highlighted, either. To our knowledge, it’s the first time someone has combined them with an artful walnut table.

Continue reading “3D Printed Spirograph Makes Art Out Of Walnut” →

Supercon 2024: Turning Talk Into Action

May 2, 2025 by No comments

Most of us have some dream project or three that we’d love to make a reality. We bring it up all the time with friends, muse on it at work, and research it during our downtime. But that’s just talk—and it doesn’t actually get the project done!

At the 2024 Hackaday Supercon, Sarah Vollmer made it clear—her presentation is about turning talk into action. It’s about how to overcome all the hurdles that get in the way of achieving your grand project, so you can actually make it a reality. It might sound like a self-help book—and it kind of is—but it’s rooted in the experience of a bonafide maker who’s been there and done that a few times over.

Continue reading “Supercon 2024: Turning Talk Into Action” →

Hackaday Podcast Episode 319: Experimental Archaeology, Demoscene Oscilloscope Music, And Electronic Memories

May 2, 2025 by 4 Comments

It’s the podcast so nice we recorded it twice! Despite some technical difficulties (note to self: press the record button significantly before recording the outro), Elliot and Dan were able to soldier through our rundown of the week’s top hacks.

We kicked things off with a roundup of virtual keyboards for the alternate reality crowd, which begged the question of why you’d even need such a thing. We also looked at a couple of cool demoscene-adjacent projects, such as the ultimate in oscilloscope music and a hybrid knob/jack for eurorack synth modules.

We dialed the Wayback Machine into antiquity to take a look at Clickspring’s take on the origins of precision machining; spoiler alert — you can make gas-tight concentric brass tubing using a bow-driven lathe. There’s a squishy pneumatic robot gripper, an MQTT-enabled random number generator, a feline-friendly digital stethoscope, and a typewriter that’ll make you Dymo label maker jealous.

We’ll also mourn the demise of electronics magazines and ponder how your favorite website fills that gap, and learn why it’s really hard to keep open-source software lean and clean. Short answer: because it’s made by people.

Where to Follow Hackaday Podcast

Places to follow Hackaday podcasts:

Download the zero-calorie MP3.

Continue reading “Hackaday Podcast Episode 319: Experimental Archaeology, Demoscene Oscilloscope Music, And Electronic Memories” →

A human hand in a latex glove holds a test tube filled with red liquid labeled H5N1. In the background is an out of focus image of a chicken.

Preparing For The Next Pandemic

May 2, 2025 by 69 Comments

While the COVID-19 pandemic wasn’t an experience anyone wants to repeat, infections disease experts like [Dr. Pardis Sabeti] are looking at what we can do to prepare for the next one.

While the next pandemic could potentially be anything, there are a few high profile candidates, and bird flu (H5N1) is at the top of the list. With birds all over the world carrying the infection and the prevalence in poultry and now dairy agriculture operations, the possibility for cross-species infection is higher than for most other diseases out there, particularly anything with an up to 60% fatality rate. Only one of the 70 people in the US who have contracted H5N1 recently have died, and exposures have been mostly in dairy and poultry workers. Scientists have yet to determine why cases in the US have been less severe.

To prevent an H5N1 pandemic before it reaches the level of COVID and ensure its reach is limited like earlier bird and swine flu variants, contact tracing of humans and cattle as well as offering existing H5N1 vaccines to vulnerable populations like those poultry and dairy workers would be a good first line of defense. So far, it doesn’t seem transmissible human-to-human, but more and more cases increase the likelihood it could gain this mutation. Keeping current cases from increasing, improving our science outreach, and continuing to fund scientists working on this disease are our best bets to keep it from taking off like a meme stock.

Whatever the next pandemic turns out to be, smartwatches could help flatten the curve and surely hackers will rise to the occasion to fill in the gaps where traditional infrastructure fails again.

Continue reading “Preparing For The Next Pandemic” →

This Week In Security: AirBorne, EvilNotify, And Revoked RDP

May 2, 2025 by 2 Comments

This week, Oligo has announced the AirBorne series of vulnerabilities in the Apple Airdrop protocol and SDK. This is a particularly serious set of issues, and notably affects MacOS desktops and laptops, the iOS and iPadOS mobile devices, and many IoT devices that use the Apple SDK to provide AirPlay support. It’s a group of 16 CVEs based on 23 total reported issues, with the ramifications ranging from an authentication bypass, to local file reads, all the way to Remote Code Execution (RCE).

AirPlay is a WiFi based peer-to-peer protocol, used to share or stream media between devices. It uses port 7000, and a custom protocol that has elements of both HTTP and RTSP. This scheme makes heavy use of property lists (“plists”) for transferring serialized information. And as we well know, serialization and data parsing interfaces are great places to look for vulnerabilities. Oligo provides an example, where a plist is expected to contain a dictionary object, but was actually constructed with a simple string. De-serializing that plist results in a malformed dictionary, and attempting to access it will crash the process.

Another demo is using AirPlay to achieve an arbitrary memory write against a MacOS device. Because it’s such a powerful primative, this can be used for zero-click exploitation, though the actual demo uses the music app, and launches with a user click. Prior to the patch, this affected any MacOS device with AirPlay enabled, and set to either “Anyone on the same network” or “Everyone”. Because of the zero-click nature, this could be made into a wormable exploit. Continue reading “This Week In Security: AirBorne, EvilNotify, And Revoked RDP” →