Supervisory control and data acquisition, or SCADA, systems sit in the background in industrial settings, performing all kinds of important jobs but in an ad-hoc setup, depending on the precise requirements of the installation. When we think about home automation systems, they’re pretty much the same deal: ad-hoc systems put together from off-the-shelf components and a few custom bits thrown in. [Stefan Schnitzer] clearly has significant knowledge of SCADA in an industrial setting and has carried this over into their home for their entry into the Hackaday 2024 Home Sweet Home Automation Contest. Continue reading “2024 Home Sweet Home Automation: A DIY SCADA Smart Home”→
There’s a scene in Willy Wonka and the Chocolate Factory where a little flap in the wall flips down to reveal a small organ embedded there. Gene Wilder plays a bit of Rachmaninoff on the organ, and the giant door to the chocolate room slowly creaks open.
Once [Nathan Orick] got this into his head, he couldn’t get it out, and had to give it a go in his own home. Regrettably there’s no chocolate rooms in the house, so he’s using various chords and melodies to do things like control the lights and the TV, as you’ll see in the video after the break. Although this one may have started as a joke of a home automation scheme, [Nathan] thinks it turned out pretty solid, and so do we.
He already had the piano and a Raspberry Pi Zero lying around, so getting this up and running was mostly about connections and code. Speaking of connections, [Nathan] was hard-pressed to find a micro-USB to USB-B cord, so he ended up splicing one together. Simple enough. The harder part was getting Linux to recognize the keyboard, but all it took was touching all the pins with a multimeter, evidently. What’s a project without a little magic?
And not only did it show up, Linux went to the trouble of registering it as a MIDI device all on its own. Once [Nathan] obtained the port number, he had data printing to the console every time he played a note. Then it was mostly a matter of writing code to interact with MIDI data and track the notes as they’re played, and put it all together with Home Assistant. Be sure to check out the brief demo after the break.
What do you mean, the temporary breadboard setup went into production? (Credit: [Gregulations], YouTube)Among all the amazing technologies that were promised to us, there is one that is much more egregious than the lack of flying cars and real hovering hoverboards: the lack of fully automated breakfast-maker machines. Instead we find ourselves handling the same dumb appliances each morning as we make a healthy breakfast that we then have time to wolf down before rushing out of the door to still be a few minutes late for work. When [Greg] researched machines that could automatically prepare breakfast, he came up empty, which led him down the rabbit hole of the Autochef-9000.
Although often featured in movies – ranging from Back to the Future to Wallace and Gromit – the contraptions in those are rarely practical, and real-life attempts often suffer the problem of feature creep as they have to handle too many ingredients and operations. This is where [Greg] found redemption in the simplicity of a proper British breakfast: beans, toast, sausages (sossys), and eggs. Months of CAD, welding, breadboarding, and writing Arduino code later, he made a machine that can open a can of beans, toast bread, boil eggs, fry up sausages, and deposit it all on a plate, all ready for that morning breakfast first thing when you stroll into the kitchen.
When you find something you love doing, you want to do it everywhere, all the time. Such is the case with [jefmer] and programming. The trouble is, there is not a single laptop or tablet out there that really deals well with direct sunlight. So, what’s a hacker to do during the day? Stay indoors and suffer?
Image by [jefmer] via Hackaday.IOThe answer is a project like Pocket Pad. This purpose-built PDA uses a Nice! Nano and a pair of two very low-power ST7302-driven monochrome displays. They have no backlight, but they update much faster than e-paper displays. According to [jefmer], the brighter the ambient light, the more readable the displays become. What more could you want? (Besides a backlight?)
The miniature PocketType 40% is a little small for touch typing, but facilitates thumbs well. [jefmer] added those nice vinyl transfer legends and sealed them with clear nail polish.
All of the software including the keyboard scanner is written in Espruino, which is an implementation of JavaScript that targets embedded devices. Since it’s an interpreted language, [jefmer] can both write and execute programs directly on the Pocket Pad, using the bottom screen for the REPL. I’d sure like to have one of these in my pocket! Continue reading “Keebin’ With Kristina: The One With The Pocket Cyberdeck”→
The temptation to “take the money and run” was apparently too much for the leadership of the AlphV ransomware crime ring. You may have heard of this group as being behind the breach of Change Healthcare, and causing payment problems for nearly the entire US Healthcare system. And that hack seems to be key to what’s happened this week.
It’s known that a $22 million payment made it through the bitcoin maze to the AlphV wallet on the 1st. It’s believed that this is a payment from Change Healthcare to recover ransomed files. An important detail here is that AlphV is a ransomware-as-a-service provider, and the actual hacking is done by “affiliates”, who use that service, and AlphV handles the infrastructure, maintaining the actual malware, and serving as a payment processor. That last one is key here.
A couple days after that big payment landed in the AlphV account, a seizure notice went up on the AlphV TOR site, claiming that it had been taken down by the FBI and associated agencies. There was something a bit odd about it, though. See, the FBI did seize the AlphV Tor site back in December. The seizure notice this time was an exact copy, as if someone had just done a “save page as”, and posted the copy.
There is precedent for a ransomware group to close up shop and disappear after hitting a big score. The disruption AlphV enabled in the US health care system painted a big target on them, and it didn’t take a tactical genius to realize it might be good to lay low for a while. Pocketing the entire $22 million ransom probably didn’t hurt either. The particularly nasty part is that the affiliate that actually pulled off the attack still claims to have four terabytes of sensitive data, and no incentive to not release it online. It’s not even entirely clear that Change Healthcare actually received a decryption key for their data. You do not want to deal with these people.
Who’d have thought that $30 doorbell cameras would end up being security liabilities? That’s the somewhat obvious conclusion reached by Consumer Reports after looking at some entry-level doorbell cameras available through the usual outfits and finding glaring security gaps which are totally not intentional in any way.
All these cameras appear to be the same basic hardware inside different enclosures, most supporting the same mobile app. Our favorite “exploit” for these cameras is the ability to put them into a pairing mode with the app, sometimes by pressing a public-facing button. Slightly more technically challenging would be accessing images from the app using the camera’s serial number, or finding file names being passed in plain text while sniffing network traffic. And that’s just the problems CR identified; who knows what else lurks under the covers? Some retailers have stopped offering these things, others have yet to, so buyer beware.
Speaking of our techno-dystopian surveillance state, if you’ve had it with the frustrations and expense of printers, has Hewlett-Packard got a deal for you. They want you to never own a printer again, preferring that you rent it from them instead. Their “All-In Plan” launched this week, which for $6.99 a month will set up up with an HP Envy inkjet printer, ink deliveries, and 24/7 tech support. It doesn’t appear that paper is included in the deal, so you’re on your own for that, but fear not — you won’t go through much since the entry-level plan only allows 20 prints per month. Plans scale up to 700 prints per month from an OfficeJet Pro for the low, low price of $36. The kicker, of course, is that your their printer has to be connected to the Internet, and HP can pretty much brick the thing anytime they want to. The terms of service also explicitly state that they’ll be sending your information to advertising partners, so that’ll be fun. This scheme hearkens back to the old pre-breakup days of AT&T, where you rented your phone from the phone company. That model made a lot more sense when the phone (probably) wasn’t listening in on everything you do. This just seems like asking for trouble.
It’s been a while since Ingenuity‘s final rough landing on Mars permanently grounded the overachieving helicopter, long enough that it’s time for the post-mortem analyses to begin. The first photographic evidence we had was a shadowgram from one of the helicopter’s navigational cameras, showing damage to at least one of the rotor tips, presumably from contact with the ground. Then we were treated to a long-distance shot from Ingenuity‘s rover buddy Perseverance, which trained its MASTCAM instruments on the crash zone and gave us a wide view of its lonely resting place.
Now, geovisual design student [Simeon Schmauβ] has taken long shots made with the rover’s SuperCam instrument and processed them into amazingly detailed closeups, which show just how extensive the damage really is. One rotor blade sheared clean off on contact, flying 15 meters before gouging a hole in the regolith. Another blade looks to be about half gone, while the remaining two blades show the damaged tips we’ve already seen. That the helicopter is still on its feet given the obvious violence of the crash is amazing, as well as an incredible piece of luck, since it means the craft’s solar panel is pointing in roughly the right direction to keep it powered up.
Once upon a time, a watch was just a watch. These days, though, smartwatches have all kinds of tricks built in, from heartrate sensors, to accelerometers, gyros, and tons of networking capability. Take advantage of just some of that hardware, and you have yourself a pretty nifty controller. And that’s precisely what [Simon Brem] did.
The project is based around the capable PineTime smartwatch, which [Simon] has been using with the InfiniTime firmware. On this platform, he created an app that sends out Bluetooth MIDI commands straight from the watch. It can be used as a motion controller, where waving and angling the watch can be used to control MIDI parameters, or it can be used to sync BPM to the wearer’s heartrate. [Simon] demonstrates an example use case in a demo video, where the watch is used to control filters in pleasant ways.
