LCD Backlight Repair

January 22, 2010 by 13 Comments

Another broken LCD TV came [Steve DiRaddo’s] way. This one had a broken backlight that he wanted to fix. He scrapped his LCD light table in order use the inverter. The two televisions were not the same size, nor made by the main manufacturer, but backlights all operate under the same principles. Using an inverter from a bit larger model meant it would have enough power to illuminate the lamps but he knew there’d be a problem with connectors and pinouts. After a bit of testing and creative wiring he got the system back up and running.

He’s got some extra parts left over from each TV including a bunch of CCFL lamps. Sound like it’s time to add some ground effects to his bike.

Billy Bass With Selectable Clips

January 20, 2010 by 22 Comments

[Will] enjoys giving hacked items as Secret Santa gifts and this year he decided to augment a Billy Bass. These gag items have become a popular hack to use as a prop or to read your Twitter updates to you. Right of the bat he scrapped the original PCB and sent it to the gift’s future recipient as if he were a kidnapper extorting a family. He then set to work replacing the guts with a pair of PIC 18F452 microcontrollers. One uses power transistors to control the movement, the other controls an MP3 that handles the sound clips. The interface has some LEDs for added effect and uses a dial to select each sound clip which is displayed on a 4×20 character LCD.

The project has several voltage headaches as the motors operate at 6v and 4v, the microcontrollers and LCD display at 5v, and the MP3 is looking for 1.5v. That’s for voltages supplying this Frankenstein’d schematic. But he pulled it off, as you can see in the video after the break.

Continue reading “Billy Bass With Selectable Clips” →

IntoDream, The ‘portable’ Dreamcast

December 15, 2009 by 30 Comments

What looks like an absolute mess of wires,5 fans,3 batteries, and other miscellaneous equipment squeezed into a Tupperware box on the left? At first we didn’t believe it, but it is actually [John’s] fully functioning slick-looking portable Dreamcast on the right. The system runs Quake 3 for a little over 2 hours, not too bad considering it is also powering a VMU, rumble pad, 5 inch LCD screen, and did we mention 5 fans! All in all, it’s still smaller than the original Xbox controller, and we like that one of the greatest consoles is getting some well deserved respect. Check out the work log and a video of it functioning after the break. Continue reading “IntoDream, The ‘portable’ Dreamcast” →

IR Air Conditioner Timer

October 10, 2009 by 20 Comments

installed (Custom)

[Tom] has an office job in China. His office is cooled by a small single room air conditioner. In an effort to make his office a little more comfortable, he built this IR timer unit. It cools his office down before he gets there so he doesn’t have to wait for it in the morning. He started by decoding the IR signal from the remote for the unit. He then built this ATiny13 based remote. He notes that the internal clock of this thing isn’t that accurate. power cycling it every day seems to help. It is also pretty cool that he built the unit to not only send the cooling code, but he can switch it to the heating code for the winter.

[thanks Mario]

Repair A Malfunctioning LCD

June 20, 2009 by 43 Comments

When most people encounter dead pixels on an LCD text display, they figure that the display is dead and they decide to scrap it. However when the LCD display on one of [Joe]’s cordless phones started to show dead rows and columns of pixels, [Joe] decided that he could fix it. With only a pencil eraser, a hot air gun, and a screwdriver (for disassembly), [Joe] was able to fix his phone’s screen in just under 10 minutes. His process involves heating the glue holding the LCD’s ribbon cable to the phones PCB with a hot air gun and using a pencil eraser to reattach segments of the ribbon cable to the PCB. If anyone here has a problem similar to [Joe]’s, be sure to check out his detailed how-to complete with step-by-step pictures.

Wireless Portable USB Tether

May 21, 2009 by 13 Comments

USB

[Pete] has put together a fairly simple writeup on building a wireless USB tether for your DSLR. He’s basically using a pair of USB wireless adapters and a battery pack. In his original version, he did some slight modification to the dock that powers the USB dongle, adding his own battery pack too. He notes that this whole project can be done without the effort he put into it, at a little more expense.  The only improvement we think would be nice would be a better way to package it to keep it out of the way while you shoot.