This Arduino powered DMX controller came along at just the right time. We had shown you a project earlier that involved the DMX system and several commenters remarked on the price to get into DMX hardware. If you happen to have an Arduino around, you can build a DMX controller. He found a schematic for a DMX driver, and built some custom code to control it all. You can download his code on the project site.
This Clock Knock Block has a bit of everything; milling, Arduino, sensing, solenoids, and plenty of dirty puns. Just knock on the box or on the table right next to it and the time of day will be played back to you in a series of crisp, clean knocks. A big part of the fun here is that the box is a musical instrument.
If you take a look inside you’ll find an Arduino, a piezo sensor, a solenoid, and a nine-volt battery. The piezo sensor detects your knocking as an input. It can even listen to and repeat back a series of your knocks. The Arduino actuates the solenoid, which strikes the wooden enclosure, producing the knocking sound.
We’ve embedded a video of this useless machine after the break (that’s where all the puns are). One note for your own build; this box is made out of mahogany and because it is used as a resonance chamber, this may not work as well if it isn’t milled from a piece of quality lumber. Continue reading “Clock Knock Block Full Of Puns”
Everyone loves a good LED matrix hack, and we’ve seen our fair share, but never a 16 by 24 hand soldered SMD one. [bear24rw] and his team needed a project reflecting the interests of one of his classes, being an EE major, an LED matrix was just the ticket. Based on this instructable, he was able to cobble together a driver board; the code however was unacceptable, and he came up with a double buffer array solution. You can grab the eagle file and source code here, while you’re at it check out a quick video after the break.
[garhol] tipped us off about a self-taught hacker who brought a little light to his tiny home. [William Kamkwamba] dropped out of school because his family lacked the $80 per year for tuition. At the age of 14 he read books from the library and gained the knowledge he needed to built a 12 watt wind generator from junk parts. Wow!
We’re pretty used to hearing about creative people who end up getting punished for their hacks. Fortunately he has been rewarded for his brilliance. He’s now studying at the African Leadership Academy in Johannesburg with a well-deserved scholarship.
His story comes to the surface now because a book about his experiences has just been released. We need more people like this, and they should be rewarded for their efforts like he has been. We’ve put the book on our hold list at our Public Library and can’t wait to gain some knowledge from [William’s] experiences.
Check out his short talk at the TED conference, embedded after the break. Continue reading “Hacker Rewarded For Creating Electricity”
[Tyler] has had his electrochemical machining hack up for a while now. His final version uses a pump to move electrolyte out through the etching head and onto the workpiece. This keeps fresh electrolyte in the etching region and clears out the insoluble material. We see how this could be attached to a CNC system and used to etch PCBs without the use of a special inkjet printer, toner transfer, or laser etching machine.
[thanks Ian]
[youtube=http://www.youtube.com/watch?v=UL_CUbN9F7E]
In the military, you have to carry tons of stuff. This is something we hear and see all the time. They are always trying to come up with ways to reduce the weight or quantity of the things that you bring into the field. This power generating backpack harnesses the natural up and down motion of your steps to produce power. This could reduce the amount of batteries carried into the field greatly. That’s what they say anyway, how many batteries do soldiers normally carry around? Aside from that point, we think it is pretty cool. We could see using this to keep our cell phone or GPS charged on long hiking and camping trips. You could also build something of your own to work similarly.
Reader [GRitchie] wrote in with an interesting find in his new TV set: with just some minor soldering it was possible to tap into an unencrypted hi-def video stream.
HDCP (High-bandwidth Digital Content Protection), used by Blu-Ray players and cable or satellite receivers, normally ensures a DRM-protected link between the device and a compatible display. Any properly-licensed device that forwards HDCP content (such as an HDMI switch box) is expected to provide encrypted output; those that don’t may get blacklisted by the system and become expensive paperweights. It’s something of an annoyance for users who feel this oversteps fair use applications such as time-shifting.
[GRitchie] found that his new TV with “InstaPort” Fast HDMI Switching didn’t perform this re-encryption step between the set’s internal switcher and the next stage in decoding. Soldering just eight wires directly from the switching chip’s output to an HDMI cable provided an unencrypted output that could then be received by a PC for later replay.
What’s not clear at this point is whether the capability is peculiar to just this one make and model, or applies to anything with the new Fast HDMI Switching. If the latter, it will be interesting to see how this plays out…nearly all of the major HDTV manufacturers are evaluating InstaPort for new sets, which would make any attempt at HDCP blacklisting awkward, to say the least.
