Scare ’em Silly With A Moving Pumpkin

rovin_pumpkin

Halloween is a scary time for the little ones. It’s dark, they can barely see through their injection molded Spiderman masks, but it’s all worth it for the candy.

Our friends over at Evil Mad Scientist Labs have produced a pumpkin that moves on its own. The little pumpkin was disemboweled from the bottom and its guts were replaced by a simple robot. Three Lego wheels provide this base with one attached to a continuous rotation servo that provides the motion.  The device is powered by 3 AAA batteries and powered by an Atmel ATtiny2313 microcontroller. For added terror there are two green LEDs that act as ghoulish eyes.

We’ve embedded the video of the Rovin Pumpkin in action after the break. This is a wonderfully simple way to spice up your front porch decorations on All Hallows’ Eve. Continue reading “Scare ’em Silly With A Moving Pumpkin” →

Barcode Challenge

barcode_challenge

This morning we logged into Google to find a Barcode instead of the normal logo (how strange that Google would change their graphic!). Apparently today is the anniversary of the Barcode. This method of easily labeling items for computer scanning is used for every type of commodity in our society. But do you know how to get the cryptic information back out of the Barcode?

Here’s the challenge:  The image at the top of the post was created by the devious writers here at Hack a Day. Leave us a comment that tells us what the message says and explains how you deciphered it. There are programs that will do this for you and some smartphones can do this from a picture of the code, but we’re looking for the most creative solutions.

The winner will be decided in a totally unfair and biased way and gets their name plastered all over Hack a Day (and possibly slandered a bit).  So get out there and start decoding that machine-readable image.

Update: We’ve announced a winner for this challenge.

ED, The Electric DeLorean

lrg-75-above_all_open_rear_angle

Who wouldn’t want a DeLorean, honestly it has to be the one of the coolest cars around, what with its gull wing doors and stainless steel siding. Joking aside [Tom Neiland] and [Dave Delman] went even further, creating eD, the electric DeLorean. It contains around 910 pounds of deep cycle lead batteries, custom transmission adapter plate, and a WarP 9 DC motor controlled by a water cooled 2000 amp Z2K-HV, all together to produce 200 horsepower reaching over 85 miles per hour.

The project cost ended up around $18,000 and they plan to add even more including a digital dash and Lithium batteries to extend the cars travel distance from the currently limited 30-40 miles on a single charge. Unfortunately the two couldn’t get their flux capacitor working, but we feel Dr. Brown would still be proud. Check out a video after the break and the writeup at Jameco.

[Thanks Tech Olive]

Continue reading “ED, The Electric DeLorean” →

Record Eight 1seg Stations At Once

multiple_tv_mpeg2_stream_capture

[Aaron] tipped us off about a project over at mobilehackerz. They built something of a PVR for 1seg broadcast stations (Google translation). The 1seg broadcast standard is aimed at mobile video service and available in countries like Japan and Brazil. Their terrestrial TV signals (ISDB-T) are divided into 13 segments per channel but the HD broadcasts only use 12 of those segments. This allows the 1seg data to be broadcast in the 13th segment.

mobilehackerz wanted to record each station’s complete daily broadcast. So they picked up a bunch of USB tuner fobs and chained them together with two powered USB hubs. The video is delivered in a type of MPEG2 format so once pulled out of the air the stream can be dumped directly onto disk. It seems they’ve got some code available for this system but even with the translated page we can’t really figure out what it does. If you’re Japanese skills are strong, fill us in with a comment.

At 3000 yen (about $34) per tuner this is not the most economical PVR capture system we’ve seen. Add to that the 15 fps broadcast and we’re not sure this is of all that much use. But then again, if you have to ask “what is it for?” you’re missing the essence of the hack.

Exploding Processors For Real

[youtube=http://www.youtube.com/watch?v=X3whIm282X0]

After we posted the “High explosives pc case” earlier we saw a resounding outcry in the comments for combustible destruction. Oddly enough, we got a submission of something along just those lines. [tazzik] has taken the heat sink off of his athlon 1400+ and covered the poor processor in potassium chlorate. As you can see in the video, this was not a very effective heat management decision. It is definitely fun, but nowhere near as explosive as our thermite shenanigans.

[thanks Steve]

Halloween Prop: Bigmouth Billy Bass

internal-thumb (Custom)

Back in 2001, the Bigmouth billy bass was still relatively new. Hacking one to record and play back both audio and movement was quite a new feat. You can read all about how they pulled it off. Though most of us agree that this could be done easier now, with off the shelf microcontrollers, this is a great example of constructing your own system to fit the need. We’ve seen a similar hack done very recently with an mbed microcontroller.

Five Concept Mice Add Multi-touch Control

[youtube=http://www.youtube.com/watch?v=SLw1MXTDlAE]

Microsoft is showing off five concepts for added mouse functionality. All of them seek to replace traditional move-and-click with touch sensitivity through either capacitive sensing, video recognition, sensor articulation, or laser scanning. We’re excited about the prospects of some of these features but at the same time wonder what this does to the price of this much-abused peripheral. After the break we’ll touch on each of the devices, along with time references for the video embedded above. Continue reading “Five Concept Mice Add Multi-touch Control” →