WhereAVR APRS Tracker

WhereAVR_Board

We posted a story about someone doing some APRS tracking recently. This is old news to some, but new fresh stuff for others. If you want to build your own tracker, here’s a great writeup on one.  The WhereAVR is low cost, low power and has plenty of I/O.  With all of the schematics and PCB files available on his site, you should be able to get one working in quickly. He does need a little help building a nice simple configuration tool to work in windows, anyone want to volunteer?

WSPRing Across The Atlantic

wspr

Host of the Soldersmoke podcast, [Bill Meara], contributed this guest post.

WSPR is a new communications protocol written by radio amateur and Nobel Prize winner [Joe Taylor]. Like the very slow QRSS system described in a previous post, WSPR (Weak Signal Propagation Reporter) trades speed for bandwidth and allows for the reception of signals that are far below the level of radio noise. WSPR takes “low and slow” communications several important steps ahead, featuring strong error correction, high reliability, and (and this is really fun part) the automatic uploading (via the net) of reception reports — [Taylor]’s WSPR web page constantly gathers reports and produces near real-time Google maps of showing who is hearing who. The WSPR mode is very hack-able: [Bill Meara] is running a 20 milliwatt homebrew transmitter from Rome, Italy that features an audio amplifier from a defunct computer speaker pictured below. This contraption recently crossed the Atlantic and was picked up by the Princeton, New Jersey receiving station of WSPR’s esteemed creator, [Joe Taylor]. Continue reading “WSPRing Across The Atlantic” →

Make Your Own LEDs

diyled

Ever wanted to make your own LED? You might be tempted to after reading how easy it is. No, this won’t really be a practical LED that you would use to light a project, but it is very cool anyway. [Michael] picked up a box of Moissanite, or Silicon Carbide, on eBay for roughly $1. Making the LED is as easy as putting your positive lead to the crystal and touching it with a sewing needle attached to a negative lead. He has tips on how to get the best results as well as a little bit of history of LEDs on the site.

[thanks Andreas]

An Amazingly Professional LED Bike Light

light1

[Tom] sent us a link to this very professionally done project. He built a bike light that is a 540 lumen Luxeon light with a custom case.  The LED, Lens, and driver were purchased first. Everything else was designed around it. The design is compact and good looking. You can download the CAD files on the site if you want to make your own. He is using an Atmel AVR ATTiny13 to control brightness.

PSP 3000 Firmware 5.03 Hacked

[youtube=http://www.youtube.com/watch?v=Qn2Z8bYr3tE]

PSP firmware 5.03 has been hacked by Team Typhoon. This allows you to run custom code on the PSP by taking advantage of the tiff exploit. You’ll have to wait to download the hack though, they haven’t released it yet. This means those of you still on 5.02 or still using the little blue tool will be able to upgrade soon.

Peggy 2 Super Pixels

rgb

[Windell] from Evil Mad Scientist Laboratories took one of their Peggy 2 kits and gave it a little upgrade. The Peggy 2 is a programmable 25×25 LED display. It’s Arduino compatible and can accommodate big 10mm LEDs. Most people assemble them using just one color, but [Windell] decided to create giant RGB pixels by placing discrete red, green, blue, and white LEDs next to each other in the board. This creates a 12.5×12.5 grid of full color pixels. It’s an interesting effect and you should definitely check out the video embedded below which shows how the transition can be smoothed using a diffuser. Continue reading “Peggy 2 Super Pixels” →