Liquid Tree

November 11, 2008 by 22 Comments

Liquid Tree is decorative, functional, and green. It’s a liquid feedback display created by [Jia Yi Lin] that is designed to tell you exactly how much water you’re wasting in the shower. Behind the pretty tubes is some interesting hardware. [Lin] used an Arduino board, and based her code off the Unipolar Stepper example. She’s posted her own code and wiring for the project. When hot water is turned on, the motors decrease the amount of liquid in the tubes. This causes the pattern to slowly disappear, indicating water consumed.

[via NOTCOT]

Gift Card Electronics

November 11, 2008 by 28 Comments

Gift-giving season is upon us, and it’s time for people to start panicking about what to give to their friends and families. Gift cards have gained in popularity over the years, as companies count on people to forget to use them. But how about gift cards that do more than store a token amount of cash? Best Buy is now selling a gift card that doubles as a speaker. It has a mini headphone jack that’ll plug into any audio player. You only need to spend fifteen dollars to get it. Target’s gone all out, with a gift card that is also a 1.2 MP digital camera. It comes with a USB cord and driver disk, and there’s even one with a 64MB USB flash drive. We’re very interested to see if these will take off, and what people will do with them once the cards are used up.

[via Gizmodo]

Super Nintendo Clock

November 11, 2008 by 9 Comments

super_nintendo_clock

[Aaron] sent us this sweet Super Nintendo Clock that he built. When he found himself with a broken SNES, a friend challenged him to out do his previous NES clock. This time, the display would be located in the cartridge, and removable. Setting the time is done on the SNES controller and seems to work pretty well as you can see in the video after the break.

Continue reading “Super Nintendo Clock” →

Messing With Barcodes

November 10, 2008 by 13 Comments

stencil

[nico] just received his credentials for an upcoming conference. On each badge, there’s a 2D barcode with the participant’s bio and contact info. These are meant to be scanned by vendors for future contact. [nico] isn’t so interested in that and plans on updating his personal info by generating a new barcode. To this end, he’s collected a number of links to help out barcode hackers. He used the SWIPE toolkit to identify the format and decode (it has an online component too). There are also several online encoders you can use, like this one from [Terry Burton]. If you’re wondering what sort of shenanigans you can get into faking barcodes, check out [fx]’s presentation from 24C3.

[photo: seanbonner]

The EFF’s Privacy Agenda

November 10, 2008 by 17 Comments

eff_privacy1

With a new administration coming into power, the Electronic Frontier Foundation feels that it’s time for a change (see what we did there). They’ve posted an agenda that covers fixing privacy issues that have come to the forefront in the last eight years. It involves repairing amendments that prevent corporations from being sued for warrantless wiretapping. They would also modernize the Electronic Communications Privacy Act so that it would cover modern technology. The heavily abused State Secrets Privilege needs reform as well. Their final issue is with REAL ID and datafarming that many state governments have already rejected. If even a bit of this gets fixed, we’ll be happy. In any case, it’ll be good to have a more tech focused administration that doesn’t need the internet explained to it in terms of dumptrucks and tubes.

[photo: Jake Appelbaum]

Easy High Voltage Power Supply

November 10, 2008 by 16 Comments

hv_supply

[rocketman221] wrote up one of the simplest ways to build a high voltage power supply. This one in particular was used on his coilgun. Instead of building a custom circuit, he’s using flash charging boards from disposable cameras. Six 450V 470uF caps are wired in parallel to make up the bank. Two of the charger boards are wired to one switch to initiate the charging process. Four additional boards are wired two a second switch for the second charging stage. The part cost on this is incredibly cheap and it only requires a 3.3V input to reach 450V. The writeup has plenty of warnings about the dangers of high voltage; you need to clean off all flux residue to prevent arcing across the circuit boards. Embedded below is a video of the bank being discharged through several objects. Continue reading “Easy High Voltage Power Supply” →

Autonomous Cookie Monster

November 10, 2008 by 8 Comments

cookie_monster

[DJ Sures], who built the autonomous Wall-E, is back with another creation. His new autonomous Cookie Monster is certainly an interesting build. He had the cookie monster plush toy already so the first step was to flay the blue beast and insert a skeleton. He used another robot for that. There are two servos for the wheels plus one for each arm and one for the neck. There’s a distance sensor in the mouth. He built a custom board for the PIC18F4685 microcontroller which is running the same 2D mapping code as his previous bot. Check out the video of it in action below. Continue reading “Autonomous Cookie Monster” →