[youtube=http://www.youtube.com/watch?v=TkUSjf0U-GU]
Meet Skelly, the propeller powered singing skeleton, winning entry to the Unofficial Propeller Halloween Contest. Sick of the massive amounts of Arduino projects floating around the web, [Oldbitcollector] offered a halloween challenge. Make something spooky using a propeller and other parallax stuff, win a prize. Skelly, made by [Chuck Rice] was the star of the show, so [Chuck] will be getting some USB development boards in the mail.
The latest version of the Nintendo DS, the DSi, has officially launched in Japan. It features larger dual touchscreens, dual cameras, and an SD card slot. The members of GBAtemp.net have decided to tackle the most important question: will it run homebrew? Current DS systems just need a purpose built flash cartridge to load homebrew software (usually stored on MicroSD). Forum members have tested at least 10 different flash carts, and none of them worked. While not completely exhaustive it’s proof enough to us that current generation carts will not work. We hope this is something that can patched with a new firmware. Most carts load their firmware off the flash, so upgrades are easy. The blocking of homebrew maybe a side-effect of Nintendo’s announced region-locking on the DSi.
We hope this gets sorted out soon. Maybe we’ll see hackers figure out how to take advantage of the SD slot instead. If you’ve got a Nintendo DS, there’s no excuse not to be playing with homebrew. It’s as easy as copying files to a card. We’ve had success with the DSTT, which you can find on DealExtreme for just $10.
[via Gizmodo]
ZigBee is a low-power communication system using digital radios. It’s intended to be easier to work with than Bluetooth. Adafruit recently added an adapter board for Digi’s XBee product line and has put together a great how-to to show the devices potential. Using two XBee radios and adapters you can wirelessly program an Arduino board. This would be great if your Arduino was installed in an inaccessible area or maybe it’s over 100feet away from where you’re working. The radios do serial communication just fine. What the how-to covers is getting the reset line working so the Arduino can restart automatically after you program it. Once the radio pair is configured properly, it will pass the RTS line state directly from one device to the other.
[Bre] dug up this excellent robot fish prototype project. The PPF-O9 has three servos. One on the forward fins to control depth, one on the middle joint, and one final one drives the tail fin. The battery box is mounted to the underside. The control scheme is interesting: the right stick controls left/right and up/down while the left stick controls the frequency and amplitude of the motion. They say the robot is fairly stable, but swimming and turning can be slow. They’ve included CAD files for almost every component to help you with your own designs.
In June, we highlighted a robofish designed for swarm communication.
[Todd] sent in his Hack-o’-lantern just a bit late for Halloween. He did a good job of working with the logo considering the difficulty it poses for pumpkin carving. We would have been proud to have that on our porch for the kids to steal and smash in the road. Since others in the past have also done Hack a Day pumpkins, maybe this will spawn a Hack a Day pumpkin carving contest next year. If he had enough time to get the green LED working, it would have been that much sweeter; everything is better with electronics.
In case you were wondering what industrious hacker [Joe Grand] was doing when he’s not building stuff for Prototype This!, designing Defcon badges, or testifying before congress, it’s this: The BSoDomizer is a VGA pass through device that displays an image of your choice on the victim’s screen. It can do this either periodically or via an IR trigger. The image of choice is a Windows style Blue Screen of Death. It’s powered by a watch battery. The project site has all the schematics you need plus ASCII goatse imagery; you’ve been warned. Embedded below is a demo of the device. We unfortunately didn’t get to see it when it was originally presented during Defcon 16. Continue reading “BSoDomizer Blue-screens Your Enemies”
This hexapod was sent to us on the tipline from [Jamie]. If you want to take the six-legged robot a bit farther than our earlier posts, here and here, this is the hexapod for you. The structural pieces were modeled, and cut out of 3mm thick plywood using CNC. He used TO-220 transistor nylon isolation mounts for the bearings, and bolts and locknuts at each joints. The main body houses eight servos, six for the legs and two for a camera head pan and tilt. There are another six servos, one for each leg, to lift the feet. The whole thing is controlled by an Atmel AT90S8515 clocked at 8 Mhz. The code was compiled using WinAVR free GCC GNU-C. He uses a PlayStation controller to help debug the walk cycles, and change parameters as needed. Watch a video after the jump.
Continue reading “Six Legged Crawler”
