Retrotechtacular: Rein-Operated Tractors

April 8, 2016 by Jenny List 19 Comments

It’s not unusual for new technologies to preserve vestiges of those that preceded them. If an industry has an inertia of doing things in a particular way then it makes commercial sense for any upstarts to build upon those established practices rather than fail to be adopted. Thus for example some industrial PLCs with very modern internals can present interfaces that hark back to their relay-based ancestors, or deep within your mobile phone there may still be AT commands being issued that would be familiar from an early 1980s modem.

Just occasionally though an attempt to marry a new technology to an old one becomes an instant anachronism, something that probably made sense at the time but through the lens of history seems just a bit crazy. And so we come to the subject of this piece, the rein-operated agricultural tractor.

Continue reading “Retrotechtacular: Rein-Operated Tractors” →

Hackaday World Create Day: April 23rd

April 7, 2016 by Mike Szczys 14 Comments

It’s time to get out and have some fun with other Hackaday people in your area and we have the perfect opportunity. Be part of Hackaday World Create Day on Saturday, April 23rd. This is all about meeting others for an afternoon of creativity. You might even find your engineering dream team! As part of World Create Day you’ll and brainstorm an amazing creation and connect with the people in your area that round out your own skills (electrical, mechanical, design, etc.).

This is the first ever worldwide event Hackaday has organized, and it’s made possible by all of the people who volunteered to organize a Hackaday Meetup in their area. We have heard from more than 100 of you so far and [Liz Krane] has done an amazing job following up with each organizer to get everything set up. You can still sign up to host (or co-host) and use the map to join a meetup already organized in your area.

We’re just getting started but the first added are in Ottawa Canada, Lagos Nigeria, Lynchburg, Virginia, and Puducherrry, India. We have more on the way in Malaysia, Greece, South Africa, India, Cyprus, New Zealand, France, Mexico, China, and many locations in the USA.

We’re sending out World Create Day sticker packs — created by [Joe Kim] and [Michael Guilfoil] — as fast as we can set up the Meetup pages. We will be on the lookout for Hackaday Meetups and World Create Day projects to feature right here on the Hackaday front page. Carve out 4/23 from your calendar and get excited, you don’t want to miss this!

Tiny BLE UART Makes Bluetooth Low Energy Simple

April 6, 2016 by Al Williams 20 Comments

Last time I talked about the internals of how Bluetooth Low Energy (BLE) handles data. I mentioned that the way it is set up is meant to conserve power and also to support common BLE devices like heart rate monitors. On the other hand, I also mentioned that you often didn’t need to deal with that because you’d use an abstraction layer.

This time, I want to show you how I used the Hackaday special edition Tiny BLE (from Seeed Studios) and its mbed library to do a quick simple BLE project. If you didn’t read the first part, don’t worry. The abstraction is so good, you probably won’t have to unless you want to circle back around later and get a more detailed understanding of what’s happening under the covers.

I wanted something simple for an example so you could build on it without having to remove much code. For that reason, I decided to allow my phone to control the state of a three-color LED via BLE. To do that, I’m going to use a virtual UART and some off-the-shelf phone software. The whole thing won’t take much code, but that’s the point: the abstraction makes BLE relatively simple.

Continue reading “Tiny BLE UART Makes Bluetooth Low Energy Simple” →

Fail Of The Week: Always Check The Fuse

April 6, 2016 by Jenny List 72 Comments

[Tomas] at Umeå Hackerspace in Sweden had some broken audio equipment, including a Sharp CD player/amplifier. What went wrong when he tried to fix it is a fail story from which we can all learn.

The device worked – for about a second after being turned on, before turning itself off. That’s a hopeful sign, time to start debugging. He took the small-signal and logic boards out of the circuit, leaving only power supply and amplifier, and applied the juice.

Magic blue smoke ensued, coming from the amplifier. Lacking a suitable replacement part, that was it for the Sharp.

On closer inspection it emerged that the previous owner had bypassed the power supply fuse with a piece of copper wire, Evidently they had found the fuse to be blowing too often and instead of trying to fix the problem simply shot the messenger.

We have all probably done it at some time or other. In the absence of a replacement fuse we may have guestimated the number of single strands required to take the current, or used a thin strip of foil wrapped around the fuse body. And we’ll all have laughed at that meme about using a spanner or a live round as a fuse.

So if there’s a moral to this story, it’s to always assume that everyone else is as capable as you are of doing such a dodgy fix, and to always check the fuse.

Fail of the Week is a Hackaday column which celebrates failure as a learning tool. Help keep the fun rolling by writing about your own failures and sending us a link to the story — or sending in links to fail write ups you find in your Internet travels.

The State Of 3D Printing At MRRF

April 5, 2016 by Brian Benchoff 17 Comments

Only a few days ago, a significant proportion of the Hackaday crew was leaving Goshen, Indiana after the fourth annual Midwest RepRap Festival. We go to a lot of events every year, and even when you include DEF CON, security conferences, ham swap meets, and Maker Faires, MRRF is still one of the best. The event itself is an odd mix of people rallying under a banner of open source hardware and dorks dorking around with 3D printer. It’s very casual, but you’re guaranteed to learn something from the hundreds of attendees.

Hundreds of people made the trek out to Goshen this year, and a lot of them brought a 3D printer. Most of these printers aren’t the kind you can buy at a Home Depot or from Amazon. These are customized machines that push the envelope of what consumer 3D printing technology. If you want to know what 3D printing will be like in two or three years, you only need to come to MRRF. It’s an incubator of great ideas, and a peek at what the future of 3D printing holds.

Continue reading “The State Of 3D Printing At MRRF” →

My Most Obsolete Skill: Delta-Gun Convergence

April 4, 2016 by Jenny List 92 Comments

In a lifetime of working with electronics we see a lot of technologies arrive, become mighty, then disappear as though they had never been. The germanium transistor for instance, thermionic valves (“tubes”), helical-scan video tape, or the CRT display. Along the way we pick up a trove of general knowledge and special skills associated with working on the devices, which become redundant once the world has moved on, and are suitable only reminiscing about times gone by.

When I think about my now-redundant special skills, there is one that comes to the fore through both the complexity and skill required, and its complete irrelevance today. I’m talking about convergence of the delta-gun shadow mask colour CRTs that were the height of television technology until the 1970s, and which were still readily available for tinkering purposes by a teenager in the 1980s.
Continue reading “My Most Obsolete Skill: Delta-Gun Convergence” →

Hackaday Belgrade Talks Will Live Stream Saturday

April 4, 2016 by Mike Szczys 4 Comments

We have an amazing line-up of talks for Hackaday | Belgrade, Saturday April 9, in Belgrade, Serbia. The talks have been sold out for weeks. You can still get a ticket to the night’s concerts if you’re in the area. Either way, the big news this morning is that we will stream all of the talks live!

Live-stream links will be posted on the conference page as soon as we get them. You should also join the chat over on the Hackaday | Belgrade project page. Just click the “request to join this project” button in the upper right. Do that right now.

There are a ton of great speakers, check the poster below. I’m excited to hear Mike Harrison (mikeselectricstuff) speak about his journey down the rabbit hole of video projection tech, Phoenix Perry’s talk on Forward Futures, Voja Anotic’s talk about the hardware badge, Peter Philip’s talk about reinventing VHDL, and pretty much all of the rest too! From the Hackaday crew you can watch Sophi Kravitz give a talk on her shutter glass project, Chris Gammell will be talking Top Down Electronics, and I will end the 8-versus-32 argument once and for all (yeah right!).

While you’re listening to the talks, why not try your hand at badge hacking. You don’t need any hardware, you can use the emulator to try out your hacked code right now your own computer. We’ll be sending out prizes for the best entries and there are only a handful so far.

You do not want to miss these talks! If you don’t believe me, check out the talks from SuperCon last November and you’ll be convinced — Hackaday conferences provide the best collection of hardware talks anywhere.

Continue reading “Hackaday Belgrade Talks Will Live Stream Saturday” →