LEGO Train Explores A World Of Sparkling Light

May 17, 2017 by John Baichtal 14 Comments

[bananenbuurman] converted his studio apartment into a glorious four-minute LEGO train course equipped with lights, motorized effects, and creative displays.

The train car sports a 360-degree camera, giving us a minifigure’s view of the whole course: a series of themed “rooms”—one papered in what appear too be Euro notes, while others have laptops, power supplies, motherboards, and other pieces of old hardware. You’re reminded of the train’s small size when it passes by various LEGO-scale elements like minifigures, looming as if they were six feet tall.

There are lights everywhere, from the LED indicators from various pieces of equipment, to holiday lights and an an impressive collection of novelty lighting. It’s almost like a Katamari Damacy level in terms of detail—the gate made of floppy drives is killer.

You can see more of [bananenbuurman]’s projects at Banana Neighbor.

[Thanks, MarkoeZ!]

Continue reading “LEGO Train Explores A World Of Sparkling Light” →

Sorting Two Tonnes Of Lego

May 7, 2017 by Jenny List 28 Comments

Have you ever taken an interest in something, and then found it’s got a little out of hand as your acquisitions spiral into a tidal wave of bags and boxes? [Jacques Mattheij] found himself in just that position with Lego. His online purchases had run away with him, and he had a garage packed with “two metric tonnes” of the little coloured bricks.

Disposing of Lego is fairly straightforward, there is a lively second-hand market. But to maximise the return it is important to be in control of what you have, to avoid packaging up fake, discoloured, damaged, or dirty parts. This can become a huge job if you do it by hand, so he built a Lego sorting machine to do the job for him.

The machine starts with a hopper for the loose Lego, with a slow belt that tips individual parts down a chute to a faster belt derived from a running trainer. On that they run past a camera whose images are analysed through a neural net, and based on its identification the parts are directed into appropriate bins with carefully timed jets of compressed air.

The result is a surprisingly fast way to sort large amounts of bricks without human intervention. He’s posted some videos, one of which we’ve placed below the break, so you can see for yourselves.

Continue reading “Sorting Two Tonnes Of Lego” →

Electromechanical Lunar Lander

May 3, 2017 by Jenny List 24 Comments

One of the smash hits of the 1970s arcade was Atari’s Lunar Lander. A landing craft in orbit around a moon would descend slowly towards the surface, and through attitude and thrust controls the player had the aim of bringing it safely in to land. Many a quarter would have been poured into the slot by eager gamers wanting to demonstrate their suitability for astronaut service.

It was to this game that [Chris Fenton] turned when he was looking for inspiration for the 2016 NYCResistor Interactive show, and the result was a Lunar Lander game with a difference, one in which the gameplay was enacted through a physical lander and lunar surface. In this case the moon in question is a papier-mâché-covered inflatable ball, and the lander is a 3D-printed model on the end of a lead screw. Control is provided by an Arduino, with a rough facsimile of the original control panel and a set of microswitches on the model to detect a crash or a safe landing.

The result is a surprisingly playable game, as can be seen from the video below the break.

Continue reading “Electromechanical Lunar Lander” →

Giant Solderless LEGO NES Controller Gives Everyone Tiny Hands

April 20, 2017 by Bob Baddeley 13 Comments

If you were thinking “I should spend $130 on LEGO bricks and build a giant USB NES controller just to see what that would be like,” but you were afraid of spending that much money, [BrownDogGadgets] has you covered. He built a giant NES controller out of LEGO. The controller is designed in LEGO Digital Designer, which lets you create a virtual model, then get a full list of parts which can be ordered online.

The electronics are based on a Teensy LC programmed to appear as a USB keyboard, and the buttons are standard push buttons. The insides are wired together with nylon conductive tape. LEGO was an appropriate choice because the Teensy and switches are built on top of LEGO compatible PCBs, so components are just snapped in place. The system is called Crazy Circuits and is a pretty neat way to turn electronics into a universal and reusable system.

If that controller is too big, they’ve also used the same circuit with some laser cut parts for your own controller. If you do want to go even bigger, take a look at [Baron von Brunk’s] LEGO NES controller, which used the electronics from a real controller.

Continue reading “Giant Solderless LEGO NES Controller Gives Everyone Tiny Hands” →

Wireless Nunchuck R/C Remote!

April 10, 2017 by James Hobson 5 Comments

[Dan], admirably rose to the occasion when his son wanted a new toy. Being a dedicated father — and instead of buying something new — he took the opportunity to abscond to his workbench to convert a Wiimote Nunchuck into a fully wireless controller for his son’s old r/c car — itself, gutted and rebuilt some years earlier.

Unpacking the nunchuck and corralling the I2C wires was simply done. From there, he combined a bit of code, an Arduino pro mini, and two 1K Ohm resistors to make use of an Aurel RTX-MID transceiver that had been lying around. Waste not, want not.

A TI Stellaris Launchpad is the smarts of the car itself, in concordance with a TB6612FNG motor controller. The two Solarbotics GM9 motors with some 3D printed gears give the car some much needed gusto.

Continue reading “Wireless Nunchuck R/C Remote!” →

Converting An Easy Bake Oven To USB

March 19, 2017 by Brian Benchoff 24 Comments

[Jason] converted an Easy Bake Oven to USB. If you have to ask why you’ll never know.

Easy Bake Ovens have changed a lot since you burnt down your house by installing a 100 Watt light bulb inside one. Now, Easy Bake Ovens are [bigclive] material. It’s a piece of nichrome wire connected through a switch across mains power. Part of the nichrome wire is a resistor divider used to power a light. This light assembly is just a LED, some resistors, and a diode wired anti-parallel to the LED.

This is a device designed for 120 V, but [Jason] wanted it to run on USB-C. While there are USB-C chargers that will supply enough power for an Easy Bake Oven, the voltage is limited to 20V. Rather than step up the USB-C voltage, [Jason] added some nichrome wires to divide it into six equal segments, then wired all the segments in parallel. This lowers the voltage by one sixth and increases the current by a factor of six. Good enough.

The power supply used for this hack is the official Apple 87W deal, with a USB-C breakout board (available on Tindie, buy some stuff on Tindie. Superliminial advertising) an Arduino Uno connected to the I2C pins. A few bits of code later, and [Jason] had a lot of power coming over a USB cable.

With the Easy Bake Oven fully converted, [Jason] whipped up a batch of cookie mix. After about 15 minutes the cookies crisped up and started to look almost appetizing.

While the result is weird — who on Earth would ever want a USB-powered Easy Bake Oven — this is honestly a fantastic test of [Jason]’s USB-C PHY breakout board. What better way to test a USB-C than a big resistive load, and what better resistive load is there than an Easy Bake Oven? It’s brilliant and hilarious at the same time.

4-way Or 8-way Joystick Restrictor Mod

January 23, 2017 by Steven Dufresne 41 Comments

Having a restricted 4-way or 8-way digital joystick for an arcade game is fine if the joystick is built into a game cabinet that plays only one game — 4-way for Pacman and 8-way for Super Cobra. But [Tinker_On_Steroids] wanted a joystick that could be restricted as either 4-way or 8-way for a cabinet that could play a multitude of games, and it had to switch from one type of restriction to the other automatically based on the selected game.

His digital joystick already came with a plate that can be mounted for either 4-way or 8-way restriction, but it has to be manually screwed in place for one or the other. He removed it and designed two 3D-printable parts, one that is to be mounted firmly to the bottom of the joystick and the other that rotates within the first one. Rotated in one orientation gives 4-way restriction and in the other orientation gives 8-way. That left only attaching a servo to do the rotation. The first video below shows mounting this all to the joystick and demoing the servo using a Teensy. The STL files for the parts are on his Thingiverse project page.

He also shows a simple circuit board he made that has two buttons and two LEDs on it for connecting to the Teensy and controlling the servo. And as an added option he shows how to talk to the Teensy from his desktop computer through USB and control the servo that way. In the second video below he details all that and also does a walk-through of the code he wrote for the Teensy. On the Thingiverse page he provides only the hex file but it’s likely you’d write your own software for interfacing with a game anyway.

Continue reading “4-way Or 8-way Joystick Restrictor Mod” →