Automated Super8 Film Scanning

January 25, 2010 by Caleb Kraft 27 Comments

For those of you who have been dreading the day that you have to dig out those old family films in Super 8 format and take them to get digitized, dread no more. Now you could turn it into a cool project. [Photobsen] has posted pictures of an automated system for scanning and compiling the film into a digital movie. There was already software available, called CineToVid, which would take the scanned segments and create a video from them, but doing the actual scanning was quite laborious. [Photobsen] built a quick automated system using an old floppy drive connected to his computer via parallel port. He now scans about 80 seconds of film per hour, unattended.

Five Updates For The Steadicam

December 28, 2009 by Jakob Griffith 9 Comments

[YB2Normal] has updated his steadicam 5 times! For those that remember the original, it allowed indie film makers to create smooth and steady video. Version 2 implemented a new gimbal based on a throttle linkage in cars. Version 3 allowed the user to easily adjust angles and weights to prevent accidentally knocking the assembly. Version 4 seems to have disappeared. And finally, version 5 updates the gimbal again using a Traxxas U-joint and redistributes the weight. What should come next? We think a handle, holding onto a threaded bolt can’t be good for your hands.

[Thanks Update]

What’s The Worst Way To Transmit Video?

December 4, 2009 by Mike Szczys 57 Comments

Perhaps the worst possible way to transmit video would be to send all pixel data in parallel. That’s exactly how [Gebhard Sengmüller’s] parallel image device works. To be fair, this is an art piece called “A Parallel Image” that addresses the concept of where we would be if serial data transmission had never come to fruition. The brochure (PDF) accompanying the exhibit gives the juicy details we’re always looking for.

The device consists of a photo sensor unit and a display unit. Both are one-square-meter stripboard panels made of epoxy. The sensor unit consists of a 50×50 grid of photo-conductors that have their counterparts in the 50×50 grid of light bulbs on the display unit. Things start to get pretty crazy when you throw in the 7500 meters of magnet wire that connect the 2500 pixel sensor unit to the display unit.

You should be able to put together how this works. The sensors pick up light and then effect the brightness of the corresponding light bulbs. The result is an interesting image, and a nightmare of wire porn that would drive any TV repairman to drink.

Continue reading “What’s The Worst Way To Transmit Video?” →

Beauty In Destruction

October 9, 2009 by Phil Burgess 49 Comments

[youtube=http://www.youtube.com/watch?v=QfDoQwIAaXg]

This is not a hack. In fact it’s a promotional montage for a collection of scientific equipment that few of us could likely afford. But like yesterday’s giant marionettes over Berlin, sometimes even a costly and delicately-orchestrated achievement transcends its own not-a-hack-ness, fulfilling our brains’ lust for wonderment all the same.

Kurzzeit of Germany produces ballistics measurement equipment. The video depicts various combinations of projectiles and targets at up to one million frames per second, revealing unexpected beauty in hitherto unseen phenomena, and is the best damn ten minutes you will waste on the internet all day!

TV-B-Gone-zilla! Rawr!

October 7, 2009 by Phil Burgess 34 Comments

tv-zilla

TV-B-Gone: antisocial nuisance or harmless prank? Whatever your feelings, there’s no denying this device has become a staple of the DIY hacking crowd, as evidenced by the countless derivatives since hatched. This latest mutation crushes them all.

[manekinen] from the Polish electronics blog Elektroda (“Electrode”) wasn’t satisfied with high-power TV-B-Gone designs using multiple 5mm infrared LEDs, so he created his own using a single one-Watt monster. The device is concealed in an ordinary flashlight casing, making it somewhat inconspicuous. A custom PCB containing an ultra-minimalist version of the TV-B-Gone circuitry sits just behind the reflector. The choice of reflectors determined maximum distance vs. coverage…they opted for distance. Specific figures aren’t given, but we estimate this thing could shut off televisions on Mars.

The original article (Polish or Google-ized English) includes construction photos and an archive (.rar) of project files including Eagle schematics and C source code.

Would it be totally irresponsible to mention there’s now a 3-Watt version of this LED? We’re just sayin’.

[thanks RicoElectrico]

Hardware HD Decoder In A Netbook

October 7, 2009 by Caleb Kraft 22 Comments

[youtube=http://www.youtube.com/watch?v=bGEeTSJiy8g]

[banzai] wasn’t happy with the performance he was getting out of his Samsung netbook. He decided it was time to do something about it. He noticed that Dell and HP both sell an optional HD decoder card for their netbooks. After a short search, he found one on ebay for only $24. He had to give up his internal wireless, but he doesn’t mind using a USB wireless dongle. Sure this isn’t horribly complicated, but he has information here that might help smooth out the process.

[via OlivierDole]

Sony’s Wireless Electricity Offering

October 3, 2009 by Mike Szczys 45 Comments

In August we covered a wireless electricity presentation from the TED conference. Now Sony has put out a press release on their wireless flat panel television prototype. The device is capable of operating without audio, video, or power cables connected to it. This is possible at distances up to 50cm at efficiencies as high as 80%.

As was talked about in the comments of the other article, the efficiency compared to that of a cable doesn’t blow our socks off. But this does show mainstream development of this technology. We hope to see advances in both efficiency and distance. We also look forward to that small black box (which we presume facilitates the energy transfer) being integrated into the TV’s body.

[via Gizmodo]