Snega2usb Changes Name, Learns New Tricks

March 22, 2010 by Mike Szczys 18 Comments

[Matthias Hullin], the creator of the snega2usb let us know that its name has been changed to the Retrode. We watched this device go through the development cycle and learn to read SNES and Sega Genesis cartridges via a USB connection. Now it’s seeing some hacking to extend those capabilities. [Jon] managed to rig the Retrode up to read Virtual Boy cartridges. The Virtual Boy was a Nintendo console from the mid ’90s that used two different screens in a glasses format to produce a 3D gaming experience. Now that the cartridges can be easily dumped you have a chance to replay the titles using an emulator.

RFID Emulator

January 3, 2010 by Mike Szczys 17 Comments

[Alexander] built an RFID emulator. It uses a wire coil (not pictured here) and an ATmega8 to represent any tag that is EM4001 compliant. This iteration requires connection to a computer to send the tag ID information to the microcontroller. In the video after the break it looks like he’s using a DIY RFID reader to test this. If the two were combined, cutting out the need for a computer, he would have an RFID spoofer on his hands.

Continue reading “RFID Emulator” →

SNES System In The Controller

December 22, 2009 by Mike Szczys 16 Comments

Want to take your SNES emulation to your friend’s house? [Chris] worked out a way to fit the important parts inside of an original Super Nintendo controller. He removed the case from a 4GB thumb drive as well as a USB hub. Using a RetroZone kit he gave the controller a USB interface. By soldering the thumb drive and RetroZone board directly to the hub he’s reduced the package down to just one cable. Everything fits inside the controller case and now when you plug it into the computer you can fire up the ROMs you copied from your original cartridges that are stored on the thumb drive.

Of course this isn’t limited to SNES emulation but the real question is can you boot from the thumb drive?

2600 Game Jukebox

December 16, 2009 by Mike Szczys 22 Comments

[Yuppicide] sent us a link to a photo album of an Atari 2600 modified to play ROMs stored inside. We did some digging around and have an idea of what’s going on. It seems that the creator, [Victor] has taken his Atari 2600 cartridge emulator one step further.

Previously, he had replaced the chip in an Atari cartridge with an EEPROM that he could reprogram via a ribbon cable. This new iteration places that EEPROM inside the case of the gaming console along with a PIC development board. The PIC board interfaces an SD card with somewhere around 1200 ROMs on it. Three switches added to the front of the Atari allow the user to cycle through available games and flash the desired title to the EEPROM. As you can see, a 2×16 LCD display now resides in the cartridge opening.

This seems a little more eloquent (and less legal) than the Super Genintari.

Snega2usb Preorder Now Available

October 14, 2009 by Gerrit Coetzee 10 Comments

[youtube=http://www.youtube.com/watch?v=ySs4cRVzPAY]

We’ve been watching the development of the snega2usb since it’s debut on Hackaday. Now it’s grown up and is ready to be manufactured. In the low quality video above [Matthias] shows some of the latest high quality additions to the board. It now has a case, shiny new firmware, production made PCB, and game pad ports. The snega2usb is shipping this December for those who preorder now.

Emulator In NES Cartridge – So Clean It Looks Factory Made

October 12, 2009 by Mike Szczys 36 Comments

nesP_NES-emulator-in-game-cartridge

We extend our congratulations to [airz] over at the ben heck forums. He put together a mod that fits an emulator into an original NES cartridge and utilizes a butchered original NES controller; and he did an amazing job!

He is using a cheap but full featured emulator board. It comes with 4 gigs of memory but also has an SD card slot. NES, Game Boy, and Game Boy color ROMs can all be played on the 2.8″ color LCD but the system also features a TV out connector for use with a larger screen as well.

The cuts that [airz] made in the case are amazing, easily eclipsing the last cartridge emulator mod we saw. The holes for the controls look as if the plastic was molded that way. For realism he also cut off the PCB interface on the business end of the cartridge and glued it in place. Apparently it took three cartridges, two controllers, and two of the emulators to make it this nice, but if you want to make an omelet…

Continue reading “Emulator In NES Cartridge – So Clean It Looks Factory Made” →

New Wii Drive Hardware Emulation

September 22, 2009 by Mike Szczys 45 Comments

wii_drive_emulation

The Wii-Optical-Drive-Emulator (WODE) makes it possible to load Wii and GameCube ISO files from an SD card or USB storage device. This hack uses the ribbon cable for the optical drive to connect to the Wii, requiring no soldering. The WODE is based on an ARM9 processor, runs Linux, and features a backlit LCD screen and 4-way center click joystick. Storage can be hot plugged and then an ISO selected using the stick and LCD display. Selected ISO files appear in the game channel as if an original disc had just been inserted into the drive.

The developers claim that a Wii firmware upgrade will not be able to lock out the WODE. There is also a second ribbon-cable connector to use as a pass-through, giving the option to keep the optical drive hooked up if you so desire. Now the race is on for a replacement case that can house all of this new hardware and still look nice like the original. We wouldn’t be surprised to see a homebrew channel program that allows ISO selection without having to walk over to the console.

The original report (in dutch) is a dead link so here’s the Google cache copy translated. These links came via the translated Tweakers article (here’s the original Dutch). Video after the break. Don’t pirate video games!

[Thanks Roy]

Continue reading “New Wii Drive Hardware Emulation” →