Wiitar, A Build Log

April 17, 2009 by Caleb Kraft 13 Comments

wiitar

[Ozan] sent in this build log from when he made a Wiitar. As you can probably guess from the title, it’s a guitar combined with a wiimote. He has completely gutted the Wiimote and installed the internals in the guitar. Some toggle switches were mounted to control the button states on the Wiimote. This is a pretty useful setup as you can use the Wiimote data to control effects on the guitar. We’ve actually seen a very similar setup before. [Ozan] has included the build log, as well as a simple glovepie script and a sample effect patch.

Tesla Coil Guitar Amp

December 7, 2008 by Caleb Kraft 18 Comments

[youtube=http://www.youtube.com/watch?v=JnmZZNWzZPc]

You’ve probably seen musical Tesla coils already. People have wired them up to computers and keyboards to make them serve as dangerous and awesome speakers. This video popped up of someone playing his guitar through one. It is rough, and not very good at polyphony, but still cool. We would like to see several coils, split by different filters to be able to hear more of the guitar chords. If only someone had rigged these up for Queen when Flash Gordan was made.

Fender Bender, Weird Sound Guitar

October 15, 2008 by Eliot 9 Comments

[danwagoner] recently completed a restoration of his very first electric guitar. Instead of going the normal route, he modded it to be a Weird Sound Generator. The WSG is a popular kit sold by Music From Outer Space. His creation, dubbed Fender Bender, has a custom pick guard cut from an old motherboard. There are multiple knobs on the pick guard plus three buttons on the neck.

Wiimote Guitar Effects Control

October 14, 2008 by Caleb Kraft 17 Comments

[youtube=http://www.youtube.com/watch?v=xmuggHx_H5Y]

[Rob Morris] sent us this video of his Wiimote based guitar effects. Similar to our post yesterday about using the Wiimote to control a synth, he is using changes in orientation to effect the sound. He starts off with simple pitch modulation, but later in the video he’s doing, uh, we’re not sure but its kind of cool.

Coyote-1 Guitar Pedal Available Now

August 26, 2008 by Eliot 3 Comments

OpenStomp’s Coyote-1 is now available for $349. The guitar effects pedal lets users design and upload their own effects to the device. It has two stomp switches with LEDs, an LCD display, and four user assignable knobs. The back has 1/4″ in/out and one selectable 1/4″. It also features NTSC composite out, a headphone jack, mini-USB for uploading, and an RJ11 I2C bus for expansion. The processor is a Parallax Propeller Chip. While the OS on the pedal is open source, the hardware design and effect design software are not. You can check out the source and product manual on their forum. If you’re more interested in breadboarding hardware, you might like the Beavis Board we covered earlier.

[via Create Digital Music]

Homemade Tube Screamer Clone

August 13, 2008 by Benjamin Eckel 5 Comments

[jonboytang] documented his construction of a clone of the famous Tube Screamer overdrive pedal from a set of plans found at tonepad. The tonepad site says you can use the plans to build either a TS-9 or a TS-808, both of which have been classic staples in every guitar player’s setup since the 70s. Although the old parts are no longer available, these new variants still have a really nice sound.

This project is really just a look into [jonboytang]’s etching and enclosure building process, but it may be useful for someone. The build and the circuit look really simple so this would be a great project for guitar players looking to learn how to etch their own PCBs. If you need more information on etching, we would suggest starting out by reading our How-To on etching single sided PCBs. If you are lazy and would rather spend a little money, check out tonepad’s online store. They have a board for this project and many others.

DeepNote Guitar Hero Bot

July 14, 2008 by Benjamin Eckel 18 Comments

A team of five high school seniors have released some videos of their new Guitar Hero bot named DeepNote. This bot uses a group of custom photodiode modules with an 8 nanosecond latency placed on the screen to sense the notes. The Parallax Propeller system takes this input and controls solid state relays hooked into the guitar’s circuitry. After we looked at a few videos of the early prototype system, we could really see how it has evolved. They have custom PCBs and a really nice frame for the photodiode sensors. You can find more info on their How It Works page and view a demo video embedded below.