Wireless Rover Has Two Guns…one For Each Of Ya

May 25, 2011 by Mike Nathan 9 Comments

texas_ranger_airsoft_rover

We never really get bored with remote-controlled rovers around here, especially when they involve reusing some old hardware as well as lasers. [Tycoon] wrote in to share his creation, which he has dubbed “Texas Ranger”.

Texas Ranger is built around an old Linksys WRT54GL router, which provides the rover’s WiFi connectivity as well as the serial interface through which everything else is controlled. The rover features a pair of PIC microcontrollers, which handle all of the servo control as well as telemetry calculations.

An onboard camera gives the operator a driver’s seat view of the action, allowing for precise control of the vehicle. Laser triangulation is used to help measure object distance, and a pair of airsoft pellet guns straddle the camera for whenever [Tycoon] feels like making his presence known. One feature we are especially fond of is the pair of Wii nunchucks which the rover uses to monitor its position. Always aware of its operating angle, it auto-adjusts the camera to compensate for uneven surfaces, guaranteeing that [Tycoon] doesn’t have to tilt his head to see straight.

Keep reading to see a quick demo video he shot of Texas Ranger in action.

Continue reading “Wireless Rover Has Two Guns…one For Each Of Ya” →

Sound Localization And A Treaded Rover

May 23, 2011 by Mike Nathan 3 Comments

soundlocalization_and_a_robot

[Jad] recently wrote in to share a pair of projects that have been keeping him busy as of late.

The first is a sound localization system not unlike one we showed you a few weeks ago. The difference is that his system displays the sound source via a set of LEDs rather than by motion, making it far less prone to interference by things like servo noise. His system uses four identical circuits, each of which are wired to a separate analog input on the Arduino. Each channel is adjustable, making it easy to tweak how the system responds to a particular sound.

His second project is a sizable robot built on the Motoruino platform. His contraption features several stacked control boards that handle the bots locomotion as well as camera control. It connects to his computer via a Bluetooth module that boasts a 1 mile range, allowing him to control everything from his PC. [Jad] is using the robot as a prototype for a much larger scale creation, and he says that his current focus is getting the robot to track and follow objects automatically using the on-board camera.

Continue reading to see a small preview of his bot’s progress so far.

Continue reading “Sound Localization And A Treaded Rover” →

Roll Away Clock Becomes A Programmable Rover

March 22, 2011 by Mike Szczys 11 Comments

The parts laid bare in the picture above all make up a roll away alarm clock that flees when you don’t get out of bed. It’s an interesting idea, but considering most folks don’t sleep on hardwood floors we can understand why [TheRafMan] was able to pick this gem up for under $5. That’s quite a deal because there’s a very usable LCD module at the top. But for this hack, he focused on using the gearhead motors to make a programmable rover.

In order to make this programmable [TheRafMan] had to add a microcontroller. He chose an Arduino variant, called the Ardweeny. It’s a board that piggy-backs the ATmega328. But he didn’t use a stock Ardweeny; he’s altered it to play nicely with jumper wire. The uC is able to interface with the gearhead motors thanks to an L293D h-bridge motor driver chip. As you can see in the clip after the jump, the rover can now be driven around using a Wii Nunchuck or via a USB connection. If you’ve got a Bluetooth module lying around it wouldn’t be hard to make this a wireless solution that can be controlled with the accelerometers in a Wii remote.

Continue reading “Roll Away Clock Becomes A Programmable Rover” →

Autonomous Rover Roams The Halls

September 19, 2010 by Mike Szczys 11 Comments

[ESylin] built an autonomous rover that roams the vacant halls of his school. On the hood of the vehicle he’s mounted two Maxbotix sonar sensors that do a great job of keeping the vehicle centered in the hallway. It will follow a wall around a corner (favoring its left side because of the left-facing sensor) and it will stop to correct itself if it gets off course. That’s because when you’re not driving a dsPIC33 is, with a Traxxas XL-5 speed controller and a hobby servo for steering. But this little guy hasn’t lost all his pep. Manual control and be switched on from from an R/C controller so you can burn up the floor tiles. Take a look at the demo after the break, with the manual control demo shown at about 4:10. Continue reading “Autonomous Rover Roams The Halls” →

Amazing Chassis Hacks

January 11, 2010 by Mike Szczys 11 Comments

[Crabfu] pulled off some great chassis work on top of a remote control drivetrain. His most recent build turns the tiny traveler into a lunar rover complete with passenger and a communications array. For this he’s sourced the parts from a toy but boosted the realism with hand-painted details that leave us in awe. His previous project sourced the body from a model truck kit. Once again, it’s the paint work that makes us envious of his skills.

Both projects conceal a Losi 1/24 scale micro rock crawler that provides for some incredible locomotion. See video of both builds after the break.

Continue reading “Amazing Chassis Hacks” →

Barbie’s Web Rover

June 29, 2009 by Caleb Kraft 6 Comments

[youtube=http://www.youtube.com/watch?v=Zrb58Pcuos0]

[Hunter, Kyle, and Dylan] sent us some information on their Barbie Web Rover. It’s an old barbie power wheels jeep that’s been converted to a web enabled remote control car. They ripped out the old drive train and tore out the steering system. The rear tires are now independently driven for steering. It’s using an Arduino to control the motors and an Acer Aspire loaded with linux for the higher functions. It’s cool that they mention the farthest test being over 1600 miles away, but when it’s web enabled, does distance really matter?

They mention that the coolness factor is proportionate to the size and we have to agree, as long as they keep it small enough to not cause any real damage. You can build a web enabled rover with a little more effort from just a router, if you don’t want to give up your laptop.

Controlling A Rover With Your Eyes

December 8, 2008 by Caleb Kraft 11 Comments

[youtube=http://www.youtube.com/watch?v=oDcbPUQ8kvY]

Controlling a robot simply by looking at your desired location is pretty freaking awesome. A web camera pointed at your face, analyzes your movements and pupil direction to send the bot signals. Look at a location and the bot goes, change your expression to send other commands to the bot. This easily surpasses the laser guided assistance droid for ease of use.

[via BotJunkie]