Month: July 2011

ArduDelta Would Make A Great Pick And Place Machine

July 7, 2011 by 23 Comments

[Bogdan] sent in a great build of a delta robot he originally posted on the Arduino forum, but he didn’t receive much feedback there. We think a build like this deserves a lot more credit.

After working for 7 months on his robot, [Bogdan] has a pretty stable (and very classy) platform made out of wood. The platform and arms in delta robots are usually extremely light to reduce the inertia of the tool so [Bodan] crafted these out of carbon fiber tubes and plexiglas. Everything is controlled by an Arduino Mega2560 encased in a plexiglas enclosure with a 20×4 LCD, status LEDs, and an infrared receiver.

Continue reading “ArduDelta Would Make A Great Pick And Place Machine” →

Hacking And Rolling At The Red Bull Creation Challenge

July 7, 2011 by 5 Comments

red_bull_creation_challenge_badge

The crew over at the HarfordHackerspace used their wits and creativity to land a spot at the final round of Red Bull’s Creation challenge. The team arrived in Brooklyn just yesterday, ready to take on all comers in the 72-hour hacking challenge which kicked off earlier this morning.

Like any other hacker convention, the Red Bull challenge sports its own unique guest badges just begging to be poked, prodded, and otherwise fooled with. Once the team arrived in New York they were given theirs, and after the opening festivities came to a close, the hacking began. The badges were putting out what looked like Morse code messages via a single red LED, and while part of the team worked to record and decode the message, others started reverse engineering the badge’s on-board PIC.

They were successfully able to bypass the PIC’s fuses to read the code inside, and what they found was pretty funny. You will have to follow the link above to find out what it was, but rest assured, the Red Bull folks definitely have a decent sense of humor.

Infrared Control For Appliances

July 7, 2011 by 10 Comments

[RB] at Embedded Lab sent in a great guide on how to control appliances with a remote control using a really clever implementation of a decade counter and IR receiver.

The build itself is very simple – just a relay connected to mains power and a handful of resistors and transistors. The device is controlled with a decade counter and an infrared module usually found tucked away in the bezel of a TV.

When everything is plugged in, the first pulse from the remote switches the relay on, providing power to the outlet. When a second pulse is received, the reset pin on the decade counter is activated, setting the device back to its original off state. It’s a pretty clever build, and could be built with parts lying around the bench.

The project is powered through wall power with the help of a transformer and a 7805 regulator, but we think the size could be reduced with a pass-through power enclosure – the circuit certainly is small enough. In all, a very nice, low component count build.

Play Dress Up With Kinect

July 7, 2011 by 20 Comments

kinect_virtual_dressing_room

While we have seen Kinect-based virtual dressing rooms before, the team at Arbuzz is taking a slightly different approach (Translation) to the digital dress up game. Rather than using flat images of clothes superimposed on the subject’s body, their solution uses full 3D models of the clothing to achieve the desired effect. This method allows them to create a more true to life experience, where the clothing follows the subject around, flowing naturally with the user’s movements.

Like many other Kinect hacks, they use openNI and NITE to obtain skeletal data from the sensor. The application itself was written in C# with Microsoft’s XNA game development tools, and uses a special physics engine to render the simulated cloth in a realistic fashion

[Lukasz] says that the system is still in its infancy, and will require plenty of work before they are completely happy with the results. From where we’re sitting, the demo video embedded below is pretty neat, even if it is a bit rough around the edges. We were particularly pleased to see the Xbox’s native Kinect interface put to work in a DIY project, and we are quite interested to see how things look once they put the final touches on it.

Continue reading “Play Dress Up With Kinect” →

Use Bluetooth To Open Your Garage And Start Your Car Remotely

July 7, 2011 by 19 Comments

bluetooth_remote_garage_opener_and_car_starter

Instructables user [tcollinsworth] is a big fan of his Android smart phone. He practically carries it with him everywhere, so he figured it would be cool to integrate as many of his home electronics with the phone as possible. His garage door openers seemed like easy enough targets, and while he was in the garage, he decided to hack his car’s remote starter as well.

He put together a small circuit that allows him to trigger any device via an application called Daisy On/Off, made specifically for the Bluetooth board he selected. One set of pins were wired to the garage door opener’s terminals, and the other to his remote start key fob. Once he had everything connected up, he packaged his components in a project box courtesy of his MakerBot. With that finished, he put together a simple interface in the Daisy application which can start his car or open the garage with a single button press.

It should be mentioned that [tcollinsworth] works for Daisy, so the reasoning behind his choice of components and Android applications is an obvious one. That said, schematics for the Daisy Bluetooth board are available online and the device can be controlled using BlueTerm, so you can feel free to roll your own implementation if you wish.

Our only nagging thought is that the system should probably include a feedback circuit that relays messages to the phone, indicating that the door is indeed open and that the car has been started. Pocket dialing your car to start without opening the garage first would definitely be a bad thing.

Check out the video below to see the system in action.

Continue reading “Use Bluetooth To Open Your Garage And Start Your Car Remotely” →

VFD Hacking

July 7, 2011 by 10 Comments

vfd_hacking

[Mostafa] was a bit bored and had a broken DVD player sitting around, so he decided to take it apart to see what made the machine’s LCD panel tick. Once he popped it open, he discovered it wasn’t an LCD panel at all, it was a VFD.

The seven segment display looked to be controlled by an ET16312n VFD driver, so he dug around online and found a datasheet for the chip. After looking at the documentation he was pretty confident he could get things working without too much trouble. He started tracing the board for the STB, CLK, Din, and Dout leads he needed to set up serial communications with the panel and was on his way in no time.

He hooked the panel up to the parallel port on his computer, and got busy hammering out some C code to write text to the display. Right now, the code lets you scroll text across the display, which is about as far as [Mostafa] cares to take it. It was done mostly as a proof of concept exercise, but since this VFD is compliant with the same NEC programming standard that most VFDs use, his code can likely be reused to drive any similar display with very little tweaking.

Smile, Your Face Is On The Internet

July 7, 2011 by 98 Comments

[Kyle McDonald] is up to a bit of no-good with a little piece of software he wrote. He’s been installing it on public computers all over New York City. It uses the webcam found in pretty much every new computer out there to detect when a face is in frame, then takes a picture and uploads it to the Internet.

We’ve embedded a video after the break that describes the process. From [Kyle’s] comments about the video it seems that he asked a security guard at the Apple store if it was okay to take pictures and he encouraged it. We guess it could be worse, if this were a key logger you’d be sorry for checking your email (or, god forbid, banking) on a public machine. Instead of being malicious, [Kyle] took a string of the images, adjusted them so that the faces were all aligned and the same size, and then rolled them into the latter half of his video.

Continue reading “Smile, Your Face Is On The Internet” →