[Shawn] recently overhauled his access control by fitting the doors with some RFID readers. Though the building already had electronic switches in place, unlocking the doors required mashing an aging keypad or pestering someone in an adjacent office to press a button to unlock them for you. [Shawn] tapped into that system by running some wires up into the attic and connecting them to one of two control boxes, each with an ATMega328 inside. Everything functions as you would expect: presenting the right RFID card to the wall-mounted reader sends a signal to the microcontroller, which clicks an accompanying relay that drives the locks.
You may recall [Shawn’s] RFID phone tag hack from last month; the addition of the readers is the second act of the project. If you’re looking to recreate this build, you shouldn’t have any trouble sourcing the same Parallax readers or building out your own Arduino on a stick, either. Check out a quick walkthrough video after the jump.
For the next three days, Hackaday will be live, in the flesh, at Hotel Pennsylvania in NYC. It’s HOPE X, the biennial conference for hackers, code crackers, and slackers put on by the awesome folks at 2600.
Hackaday has been hard at work making sure the requirements to qualify for The Hackaday Prize are well understood. Recently we published a FAQ to help answer questions, and we updated the main contest page to make information easier to find. We are also publishing a pair of “walkthrough” videos that show just how easy it is meet these requirements. In light of these clarifications, and the availability of these helpful resources, we have decided to extend the deadline for entries from 8/4/14 to 8/20/14, and to make minor changes to a couple of requirements in the Official Rules. Here’s a summary:
[Greg Gage] and some of the other crew at Backyard Brains have done a TED talk, had a few successful Kickstarters, and most surprisingly given that pedigree, are actually doing something interesting, fun, and educational. They’re bringing neuroscience to everyone with a series of projects and kits that mutilate cockroaches and send PETA into a tizzy.
[Greg] demonstrated some of his highly modified cockroaches by putting a small Bluetooth backpack on one. The roach had previously been ‘prepared’ by attaching small electrodes to each of its two front antennas. The backpack sends a small electrical signal to the antennae every time I swiped the screen of an iPhone. The roach thinks it’s hitting a wall and turns in the direction I’m swiping, turning it into a roboroach. We seen something like this before but it never gets old.
Far from being your one stop shop for cockroach torture devices, Backyard Brains also has a fairly impressive lab in the basement of their building filled with grad students and genetically modified organisms. [Cort Thompson] is working with fruit flies genetically modified so a neuron will activate when they’re exposed to a specific pulse of light. It’s called optogenetics, and [Cort] has a few of these guys who have an ‘I’m tasting something sweet’ neuron activated when exposed to a pulse of red light.
Of course controlling cockroaches is one thing, and genetically engineering fruit flies is a little more impressive. How about controlling other people? After being hooked up to an EMG box to turn muscle actuation in my arm into static on a speaker, [Greg] asked for a volunteer. [Jason Kridner], the guy behind the BeagleBone, was tagging along with us, and stepped up to have two electrodes attached to his ulnar nerve. With a little bit of circuitry that is available in the Backyard Brains store, I was able to control [Jason]’s wrist with my mind. Extraordinarily cool stuff.
There was far too much awesome stuff at Backyard Brains for a video of reasonable length. Not shown includes projects with scorpions, and an improved version of the roboroach that gives a roach a little bit of encouragement to move forward. We’ll put up a ‘cutting room floor’ video of that a bit later.
Accurate time is all around us. Streaming down from satellites thousands of miles in space, UTC time information is at all of our fingertips. You just have to know how to reach out and grab it. [hkdcsf] not only knows how to do this, he does itin style.
Tipping his hat into The Hackaday Prize contest, [hkdcsf]’s atomic clock is masterfully crafted. Not only does it get time information from GPS satellites, it also has the ability to grab the infomation from the DCF77 transmitter. And if ever it’s in a position where neither signal can be found, an RTC crystal keeps the time and date accurate.
His design is based on a PIC18F25K20, and bristles with so many features that it might make you dizzy. So be warned – you might want to be in a seated position before taking a look at this project. [hkdcsf] does a great job at detailing exactly how his clock works, and his efforts to provide this level of detail will surely help other hackers to add similar features to their future projects.
The project featured in this post is an entry in The Hackaday Prize. Build something awesome and win a trip to space or hundreds of other prizes.
This bazooka build started with a 6″ diameter PVC pipe. He mounted a length of 80/20 T-slotted aluminum extrusion to the pipe through a couple of wood blocks. [John] installed rail buttons on some Estes Alpha rockets which slide along nicely inside the T-slot. He welded a PVC cleanout fitting and plug to one end for easy access and gave her a nice paint job.
The ignition is simple: an irresistible red push button is wired to a 9V battery and a pair of alligator clips. [John] loads up a rocket, puts the gators on the wires of an igniter, pushes said button, and Bob’s your uncle. All he needs now is a pair of gun boats. Video of the build and some demonstrations we don’t necessarily recommend are after the jump.
We love portable console builds, and this one by [Daniel Fürstauer] is no exception. It’s a beautifully hacked Xbox 360 slim into an aluminum briefcase — complete with a screen and a full audio system!
He started by gutting the Xbox 360 slim and throwing out pretty much all of the original enclosure, minus the disc drive cover. Now what he did next was completely for aesthetics, but freaking awesome. He actually took the motherboard out, taped off some of the important components, and spray painted the entire thing white! We’re not too sure what effect this will have on some of the components, but it seems to work, and gives it a really unique look underneath his Plexiglas enclosure.
He housed the rest of it (complete with custom cooling fans!) inside of one of those nice aluminum briefcases, complete with a widescreen LCD monitor, and computer speakers. He even fit the power supply inside — all you have to do is plug it in! There’s also room for at least one controller, whose holding spot doubles as space for the disc drive to eject. Continue reading “Xbox 360 Slim Gets Gutted And… Painted White?”→
The project featured in this post is an entry in 
