Tiny Game Boy (That Plays Witcher 3) And Other Things That Blew My Mind

November 7, 2016 by Mike Szczys 48 Comments

For years Sprite_TM has been my favorite hacker, and yet he continues to have an uncanny ability to blow my mind with the hacks that he pulls off even though I’m ready for it. This weekend at the Hackaday SuperConference he threw down an amazing talk on his tiny, scratch-built, full-operational Game Boy. He stole the badge hacking show with a Rick Roll, disassembled the crypto challenge in one hour by cutting right to the final answer, and managed to be everywhere at once. You’re a wizard ~~Harry~~ Sprite!

Here’s what’s crazy: these are the antics of just one person of hundreds who I found equally amazing at the conference. It feels impossible to convey to you the absolute sincerity I have when I say that SuperCon was far and away the best conference I’ve ever been to or have even heard about. It managed to outpace any hyperbole I constructed leading up to the weekend. This morning felt like I was waking up from a dream and desperately wanted to fall asleep again.

Continue reading “Tiny Game Boy (That Plays Witcher 3) And Other Things That Blew My Mind” →

Fictional Hacking: Michael Westen

November 7, 2016 by Al Williams 55 Comments

I don’t know if it is true or not today, but in fiction, spies depend on lots of high-tech gadgets. I do know that during World War II, the various secret services like the OSS and the SOE did have gadgets like secret transmitters and concealed weapons. But, like [James Bond’s] grenade-launching ink pen, to [Maxwell Smart’s] shoe phone, those gadgets came from some organized lab. (When you watch the video below, remember that at that time, a personal phone going off in a theater was unknown as cell phones were years in the future.)

Continue reading “Fictional Hacking: Michael Westen” →

A Car Stand Made Of Sand

November 7, 2016 by Manuel Rodriguez-Achach 19 Comments

When the guys at [Practical Engineering] say they have a dirty car stand, they really mean it! They made a block of dirt and sheets of fiberglass as reinforcement material, and the resistance was put to test by using it as a car stand. And yes, the block does the job without collapsing.

An exmple of MSE — A MSE structure. The lateral walls add no strength, they just look nice.

Soil is a naturally unstable material, it relies only on friction for structural stability, but it has a very low shear strength (the resistance of the material’s internal structure to slide against itself). Therefore, as soon as you put some weight, a soil structure fails. The trick is to form a composite by adding layers of a stiff material. Those layers increase the shear strength and you end up with an incredibly strong composite, or ‘mechanically stabilized earth‘ (MSE). You probably drive by some everyday, as in the picture at the right.

Even though the modern form of MSE was due to French engineer Sir Henri Vidal, reinforced soil has been used since the beginnings of human history, in fact, some sections of the Great Wall of China were made using this technique. [Practical Engineering] explanation and demonstration video is very well made, be sure to check it after the break. In case you don’t want to play with dirt next time you need to fix your car, you can always make a 3D printed jack.

A Realistic Look At The Death Of A Standard

November 7, 2016 by Gerrit Coetzee 239 Comments

A bit ago I wrote an article called, “Death To The 3.5mm Audio Jack, Long Live Wireless.” A few readers were with me, a few were indifferent, many were vehemently against me, and there was a, not insubstantial, subset in a pure panic about the potential retirement of a beloved connector. Now I used a lot of opinionated language dispersed with subjectively evaluated facts to make a case that the connector is out. Not today maybe, but there is certainly a tomorrow not so far off where there are more wireless headsets at the electronics store than wired ones.

I think I saw a laserdisc player in operation exactly once. — I think I saw a Laserdisc player in operation exactly once.

So what happens when a standard dies? What happens when technology starts to move on? Let’s take a look at the CD-ROM. Continue reading “A Realistic Look At The Death Of A Standard” →

Simple ECG Proves You Aren’t Heartless After All

November 7, 2016 by Al Williams 13 Comments

We don’t think of the human body as a piece of electronics, but a surprising amount of our bodies work on electricity. The heart is certainly one of these. When you think about it, it is pretty amazing. A pump the size of your fist that has an expected service life of nearly 100 years.

All that electrical activity is something you can monitor and–if you know what to look for–irregular patterns can tell you if everything is OK in there. [Ohoilett] is a graduate student in the biomedical field and he shares some simple circuits for reading electrocardiogram (ECG) data. You can see a video fo the results, below.

Continue reading “Simple ECG Proves You Aren’t Heartless After All” →

DIY I2C Devices With ATtiny85

November 7, 2016 by Elliot Williams 31 Comments

[Pawel] has a weather station, and its nerve-center is a Raspberry Pi. He wanted to include a light sensor but the problem is, the Pi doesn’t have a built-in ADC to read the voltage off the light-dependent resistor that he (presumably) had in his junk box. You can, of course, buy I2C ADC chips and modules, but when you’ve already got a microcontroller that has ADC peripherals on board, why bother?

[Pawel] wired up a tremendously simple circuit, downloaded some I2C slave-mode code, and added an LED for good measure. It’s all up on GitHub if you’re interested.

cropped_shot_2016-10-21-112958 — Bright by Day, Dark by Night!

We’re covering this because we rarely see people coding for I2C slave devices. Everyone and their mom uses I2C to connect to sensors, for which the Arduino “Wire” library or “i2c-tools” on the Pi do just fine. But what do you do when you want to make the I2C device? [Pawel]’s project makes use of TinyWireS, a slave-mode SPI and I2C library for AVR ATtiny Arduino projects.

Here, [Pawel] just wanted a light sensor. But if you’re building your own devices, the sky is the limit. What’s the most esoteric I2C sensor that you can imagine? (And is it really the case that we haven’t seen an I2C slave device hack since 2010?)

A Vintage Interface For A Modern Radio

November 6, 2016 by Jenny List 10 Comments

The arrival of affordable software defined radio technologies over the last couple of decades has completely changed the way that radio amateurs and other radio enthusiasts approach the airwaves. There’s a minor problem with most software defined receivers though, being by their nature software driven they will usually rely on a host computer for their interface. Thus the experience is one of clicking mouse buttons or using keyboard shortcuts rather than the mechanical analogue dial interfaces that provided easy control of older radios.

This is a problem that has been addressed by [Jon Hudson, G4ABQ], with one of his SDRplay receivers. He’s mounted it and its control PC in the chassis of a very aged and non-functional Marconi CR100 communication receiver, and given it a control interface that only uses the Marconi’s front panel controls (YouTube link). A rotary encoder has been grafted onto the Marconi tuning capacitor with what looks like some Meccano, and in turn that feeds an Arduino which behaves as a keyboard for the benefit of the PC. Some extra buttons have been added for mode selection, spectrum zoom and shift, and care appears to have been taken to give their labels a period feel. Arduino code came courtesy of [Mike Ladd, KD2KOG]. The result is a very controllable SDR receiver, albeit one in a rather large case.

If you are interested in the project then we are told that it will be on the RS stand at Electronica in Munich next week, meanwhile we’ve put the video below the break.

Continue reading “A Vintage Interface For A Modern Radio” →