Building The Unreleased Lemmings Arcade Cabinet From 1991

July 29, 2024 by Maya Posch 7 Comments

Back in the early 90s the world was almost graced with an arcade version of Lemmings, but after a few board revisions it was abandoned in 1991. Now the folk over at UK-based [RMC – The Cave] on YouTube have managed to not only get their mitts on a nearly finished prototype board, but have also designed and built a period-appropriate cabinet to go with it. This involved looking at a range of arcade cabinets created by Data East and picking a design that would allow both for the two-player mode of the game, and fit the overall style.

Arcade cabinets came in a wide range of cabinet styles and control layouts, largely defined by the game’s requirements, but sometimes with flourishes to distinguish the cabinet from the hundred others in the same arcade.

In this particular case the typical zig-zag (Z-back) style was found to be a good fit as on the Data East Night Slashers 1993-era cabinet, which then mostly left the controls (with two trackballs) and cabinet art to figure out. Fortunately there is plenty of inspiration when it comes to Lemmings art, leading to the finished cabinet with the original mainboard, the JAMMA wiring harness with MultiPi JAMMA controller, a 19″ CRT monitor and other components including the 3D printed controls panel.

With more and more new arcades popping up in the US and elsewhere, perhaps we’ll see these Lemmings arcade cabinets appear there too, especially since the ROMs on the prototype board were dumped for convenient MAME-ing.

Continue reading “Building The Unreleased Lemmings Arcade Cabinet From 1991″ →

A bright orange sailboat with solar panels on the wing sail and the hull of the craft. A number of protuberances from the wing are visible containing instruments and radio equipment.

Saildrones Searching The Sea For Clues To Hurricane Behavior

July 29, 2024 by Navarre Bartz 26 Comments

Hurricanes can cause widespread destruction, so early forecasting of their strength is important to protect people and their homes. The US National Oceanic and Atmospheric Administration (NOAA) is using saildrones to get better data from inside these monster storms.

Rising ocean temperatures due to climate change are causing hurricanes to intensify more rapidly than in the past, although modeling these changes is still a difficult task. People on shore need to know if they’re in store for a tropical storm or a high strength hurricane to know what precautions to take. Evacuating an area is expensive and disruptive, so it’s understandable that people want to know if it’s necessary.

Starting with five units in 2021, the fleet has gradually increased in size to twelve last summer. These 23ft (7m), 33ft (10m), or 65ft (20m) long vessels are propelled by wing sails and power their radio and telemetry systems with a combination of solar and battery power. No fossil fueled vessel can match the up to 370 days at sea without refueling that these drones can achieve, and the ability to withstand hurricane winds and sea conditions allow scientists an up-close-and-personal look at a hurricane without risking human lives.

We’ve covered how the data gets from a saildrone to shore before, and if you want to know how robots learn to sail, there’s a Supercon talk for that.

Thanks to [CrLz] for the tip!

Getting Linux Process List Without Forking Using Just A Bash Script

July 29, 2024 by Maya Posch 16 Comments

The ps command is extremely useful when you want to get some quick information on active system processes (hence the name), especially followed by piping it into grep and kin for some filtering. One gotcha is of course that ps doesn’t run in the current shell process, but is forked off into its own process, so what if everything goes wrong and you absolutely need to run ps aux on a system that is completely and utterly out of fresh process IDs to hand out? In that scenario, you fortunately can write a shell script that does the same, but all within the same shell, as [Isabella Bosia] did, with a Bash shell script.

The how and why is mostly covered in the shell script itself, using detailed comments. Initially the hope was to just read out and parse the contents of /proc/<pid>/status, but that doesn’t have details like CPU%. The result is a bit more parsing to get the desired result, as well as a significant amount of cussing in the comments. Even if it’s not entirely practical, as the odds of ending up on a system with zero free PIDs are probably between zero and NaN, but as an ‘entertaining’ job interview question and example of all the fun things one can do with shell scripting it’s definitely highly recommended.

A black and brown planner opened like a laptop. Inside is a greyscale eink phone inside a brown piece of MDF on top, and a black keyboard fills the bottom half.

Foliodeck Squeezes A Writerdeck Into A Planner

July 29, 2024 by Navarre Bartz 2 Comments

When it comes to writing, sometimes a computer or smartphone is just too distracting to keep on task. [vagabondvivant] found this to be the case and rolled their own distraction-free writing tool, the Foliodeck.

With the increasing availability of parts for cyberdecks, it’s not too surprising to see we’re seeing the emergence of the writerdeck. Typically designed to be a no frills word processing device, they are designed to help their creators focus on writing and not be subject to the myriad notifications present trying to work with a more general computing device or smartphone.

In this case, [vagabondvivant] took a classy looking planner folio and removed its paper management components to leave a fabric and leather shell. The heart of the assembly is a HiSense A5 eink smartphone magnetically attached to a piece of MDF cut to mate the phone to the planner shell. A 10 Ah powerbank slots into the MDF below the keyboard which is also magnetically attached, and the whole thing zips up nicely. Future improvements are planned like a hinge, so it doesn’t have to be propped against something and a custom-built mechanical keyboard.

This isn’t the first writerdeck we’ve seen, and we’ve seen some other writer-focused decks and typewriter replacements.

Continue reading “Foliodeck Squeezes A Writerdeck Into A Planner” →

Three different keyboard devices with greyscale LCDs on top are on a white table. In the back left is a beige one with grey keys, front and center is a black model, and to the right is a translucent blue model with black keys being held up by a hand.

A Brief History Of AlphaSmart

July 29, 2024 by Navarre Bartz 18 Comments

There are a handful of gadgets that do one thing so well that they become cult classics long after the company that made them has moved on or closed up shop. [This Does Not Compute] takes us through the history of the AlphaSmart word processor which started as an educational tool, but finds itself in many a writer’s bag today.

The original AlphaSmart bears more than a passing resemblance to its Apple contemporaries since the company was founded by two Apple engineers. The Cupertino company didn’t see the value in the concept, but didn’t lean on any non-competes to keep the pair from pursuing the idea on their own time either. What resulted was a dead simple word processor that could be had for 1/5 of what a new computer typically cost in the era, which was particularly attractive for the target market of schools.

After several successful years, the pressure of PDAs and then smartphones from one side and cheaper laptops from the other meant school districts no longer wanted single-purpose devices when they could have a fully-fledged computing experience for students. We wonder if that was the right call, with so many now wanting distraction-free devices, but it was the end of the road for the company either way.

Our own [Kristina Panos] and [Tom Nardi] have shown us the guts of the Neo and of one of its competitors, the Writer, respectively. If you have a Neo of your own in need of replacement keycaps, you can print them.

Continue reading “A Brief History Of AlphaSmart” →

Hacker Tactic: Multi-Design Panels

July 29, 2024 by Arya Voronova 12 Comments

Last time, we talked about single-PCB-design panels, all the cool aspects of it, including some cost savings and handling convenience. Naturally, you might wonder, and many did – can you put multiple different PCBs on a single panel? The answer is “yes, without a doubt!” The tool we used last time, KiKit, will not be as helpful here, so we’ll be looking elsewhere.

Making multi-PCB panels can help you save money, naturally, but it can also make your assembly a whole lot easier, and it can bring you hacking to a whole new level. It sure helped with mine! You might have already learned that some fabs scoff at multi-design panels and add surcharges. Well, you’ll be delighted to learn that there are more hacker-friendly fabs out there, too.

Developing PCBs In Bulk

So far, I’ve worked on about 300 different PCB designs, with half of them available in my monorepo. I’ve assembled and tested just about half of these. You might guess that this would cost a lot of money, and that assembly would take a fair bit of time, but I have some tricks up my sleeve. For a start, you can easily order PCBs 10-12 times more cheaply if you do multi-panel.

Continue reading “Hacker Tactic: Multi-Design Panels” →

A Soviet Cassette Recorder Receiving Some Love

July 29, 2024 by Jenny List 40 Comments

For those of us who lived in the capitalist west during the Cold War, there remains a fascination to this day about the Other Side. The propaganda we were fed as kids matched theirs in describing the awful things on the other side of the wall, something that wasn’t borne out when a decade or so later in the 1990s we met people from the former communist side and found them unsurprisingly to be just like us. It’s thus still of interest to have a little peek into Eastern Bloc consumer electronics, something we have the chance of courtesy of [DiodeGoneWild], who’s fixing a 1980s Soviet cassette recorder.

The model in question is a Vesna 309, and it has some audio issues and doesn’t turn the tape. It gets a teardown, the motor is cleaned up inside, and a few capacitor and pot cleanups later it’s working again. But the interest lies as much in the machine itself as it does in the repair, as it’s instructive to compare with a Western machine of the same period.

We’re told it would have been an extremely expensive purchase for a Soviet citizen, and in some ways such as the adjustable level control it’s better-specified than many of our equivalents. It’s based upon up-to-date components for its era, but the surprise comes in how comparatively well engineered it is. A Western cassette deck mechanism would have been a much more sketchy affair than the substantial Soviet one, and its motor would have been a DC part with a simple analogue speed controller rather than the brushless 3-phase unit in the Vesna. Either we’re looking at the cassette deck for senior comrades only, or the propaganda was wrong — at least about their cassette decks. The full video is below, and if you’re hungry for more it’s not the first time we’ve peered into electronics from the eastern side of the Iron Curtain.

Continue reading “A Soviet Cassette Recorder Receiving Some Love” →