Retrotechtacular: Computer-Generate Video 1968 Style!

November 8, 2024 by Al Williams 11 Comments

[Classic Microcomputers] read in a book that there was a computer-generated film made in the late 1960s, and he knew he had to watch it. He found it and shared it along with some technical information in the video below.

Modern audiences are unlikely to be wowed by the film — Permutations — that looks like an electronic spirograph. But for 1968, this was about as high tech as you could get. The computer used was an IBM mainframe which would have cost a fortune either to buy or to rent the hours it would take to make this short film. Now, of course, you could easily replicate it on even your oldest PC. In fact, we are surprised we haven’t seen any recreations in the demoscene.

Continue reading “Retrotechtacular: Computer-Generate Video 1968 Style!” →

Ramsey Numbers And The Appearance Of Order In Random Numbers

November 8, 2024 by Maya Posch 25 Comments

Proof without words of the two-color case of Ramsey's theorem. (Credit: CMG Lee, Wikimedia) — Proof without words of the two-color case of Ramsey’s theorem. (Credit: CMG Lee, Wikimedia)

Generally when assuming a chaotic (i.e. random) system like an undirected graph, we assume that if we start coloring these (i.e. assign values) with two colors no real pattern emerges. Yet it’s been proven that if you have a graph with a certain set of vertices, coloring the resulting lines in this manner will always result in a clique forming. This phenomenon has been investigated for nearly a century now after its discovery by British mathematician [Frank P. Ramsey].

The initial discovery concerned a graph with 6 vertices, providing the lowest number of vertices required. Formally this is written as R(3, 3), with subsequent cases of these Ramsey numbers discovered. They are part of Ramsey theory, which concerns itself with the question of what the underlying properties are that cause this apparent order to appear, which requires us to discover more cases.

Finding the number for a particular instance of R(m, n) can be done the traditional way, or brute-forcing it computationally. Over the decades more advanced algorithms have been developed to help with the search, and people from different fields are mingling as they are drawn to this problem. So far the pay-off of this search are these algorithms, the friendships created and perhaps one day a deep insight in the causes behind this phenomenon that may have implications for physics, chemistry and other fields.

DIY Digital Caliper Measures Up

November 8, 2024 by Al Williams 15 Comments

You might wonder why [Kevin] wanted to build digital calipers when you can buy them for very little these days. But, then again, you are reading Hackaday, so we probably don’t need to explain it.

The motivation, in this case, was to learn to build the same mechanism the commercial ones use for use in precise positioning systems. We were especially happy to see that [Kevin’s] exploration took him to a Hackaday.io project which led to collaboration between him and [Mitko].

Continue reading “DIY Digital Caliper Measures Up” →

A Tiny Chemistry Lab

November 8, 2024 by Bryan Cockfield 12 Comments

While advances in modern technology have allowed average people access to tremendous computing power as well as novel tools like 3D printers and laser cutters for a bare minimum cost, around here we tend to overlook some of the areas that have taken advantage of these trends as well. Specifically in the area of chemistry, the accessibility of these things have opened up a wide range of possibilities for those immersed in this world, and [Marb’s Lab] shows us how to build a glucose-detection lab in an incredibly small form factor.

The key to the build is a set of three laser-cut acrylic sheets, which when sandwiched together provide a path for the fluid to flow as well as a chamber that will be monitored by electronic optical sensors. The fluid is pumped through the circuit by a custom-built syringe pump driven by a linear actuator, and when the chamber is filled the reaction can begin. In this case, if the fluid contains glucose it will turn blue, which is detected by the microcontroller’s sensors. The color value is then displayed on a small screen mounted to the PCB, allowing the experimenter to take quick readings.

Chemistry labs like this aren’t limited to one specific reaction, though. The acrylic plates are straightforward to laser cut, so other forms can be made quickly. [Marb’s Lab] also made the syringe pump a standalone system, so it can be quickly moved or duplicated for use in other experiments as well. If you want to take your chemistry lab to the extreme, you can even build your own mass spectrometer.

Continue reading “A Tiny Chemistry Lab” →

A set of brass safety glasses sit on a marred black workbench. The top and earpiece sections of the frames are in squarish brass plate and have ruler marks on them.

Combination Safety Glasses And Measurement Tool

November 8, 2024 by Navarre Bartz 19 Comments

While rulers and tape measures are ubiquitous, they always seem to disappear when you need them. We know you’d never forget your safety glasses (safety first!), so what if they were also a measuring tool?

Starting by snapping pieces from a folding yardstick, [Simone Giertz] and [Laura Kampf] worked out a rough prototype before letting [Giertz] complete the project in brass. Some initial issues with the weight of the frames were alleviated by switching to a lighter weight plate material and using thinner frames and weight-saving holes near the ear pieces.

Beauty is in the eye of the beholder, so we’ll let somebody else decide whether or not these will be the newest fashion craze. But it’s hard to argue with the timelessness of brass unless you have a copper allergy. We could definitely see a less expensive plastic version catching on in makerspaces for the PPE bin.

Want some other cool wearable gear? How about [Giertz]’s grocery bag hat, an evening gown with servo-driven flowers, or a shirt that reflects heat out the atmospheric window?

Continue reading “Combination Safety Glasses And Measurement Tool” →

The Rogue Emperor, And What To Do About Them

November 8, 2024 by Jenny List 135 Comments

The chances are if you know someone who is a former Apple employee, you’ll have heard their Steve Jobs anecdote, and that it was rather unflattering to the Apple co-founder. I’ve certainly heard a few myself, and quick web search will reveal plenty more. There are enough of them that it’s very easy to conclude the guy was not a very pleasant person at all.

At the same time, he was a person whose public persona transcended reality, and his fan base treated him with an almost Messianic awe. For them everything he touched turned to gold, every new feature on an Apple product was his personal invention, every one of his actions even the not-so-clever ones were evidence of his genius, and anyone who hadn’t drunk the Apple Kool-Aid was anathema. You’ll still see echoes of this today in Apple fanboys, even though the shine on the company is perhaps now a little tarnished.

It’s easy to spot parallels to this story in some of today’s tech moguls who have gathered similar devotion, but it’s a phenomenon by no means limited to tech founders. Anywhere there is an organisation or group that is centred around an individual, from the smallest organisation upwards, it’s possible for it to enter an almost cult-like state in which the leader both accumulates too much power, and loses track of some of the responsibilities which go with it. If it’s a tech company or a bowls club we can shrug our shoulders and move to something else, but when it occurs in an open source project and a benevolent dictator figure goes rogue it has landed directly on our own doorstep as the open-source community. It’s happened several times that I can immediately think of and there are doubtless more cases I am unaware of, and every time I am left feeling that our community lacks an adequate mechanism to come through it unscathed. Continue reading “The Rogue Emperor, And What To Do About Them” →

Hackaday Podcast Episode 295: Circuit Graver, Zinc Creep, And Video Tubes

November 8, 2024 by Dan Maloney 1 Comment

With Superconference 2024 in the books, Dan joined Elliot, fresh off his flight back from Pasadena, to look through the week (or two) in hacks. It was a pretty good crop, too, despite all the distractions and diversions. We checked out the cutest little quadruped, a wireless antenna for wireless communications, a price-tag stand-in for paper calendars, and a neat way to test hardware and software together.

We take the closest look yet at why Arecibo collapsed, talk about Voyager’s recent channel-switching glitch, and find out how to put old Android phones back in action. There’s smear-free solder paste application, a Mims-worthy lap counter, and a PCB engraver that you’ve just got to see. We wrap things up with a look at Gentoo and pay homage to the TV tubes of years gone by — the ones in the camera, for the TV sets.