Numitron Tube Tutorial

December 21, 2011 by 24 Comments

Nixies and VFDs are great displays, but when using them you’ve got to deal with some fairly high voltages, at least for the micro projects we see on Hack a Day. Luckily, there’s another ancient technology that can be driven at tiny voltages. [Kenneth] put up a great tutorial on Numitron tubes to show the Internet how to get these guys working.

Numitron tubes are like Nixies, but instead of the ten number-shaped filaments in each Nixie, Numitrons are old-school seven-segment displays. [Kenneth] picked up a few on ebay and the seller was kind enough to include a Russian data sheet. Each filament in his IV-9 Numitrons required about 20mA to light up, perfect for the constant current LED drivers [Kenneth] picked up

The test circuit consisted of an ATtiny2313 and an A6278 LED driver. The code on the ATtiny cycles the digits 0 through 9. This is sent through the LED driver and lights up the tiny filaments inside the tube. Check out the video after the break to see the Numitron in action

Continue reading “Numitron Tube Tutorial” →

Hackaday Links: December 21, 2011

December 21, 2011 by 19 Comments

The “Little Drummer Boy” On a Scanner and Drum:

There’s little more information on this hack, however, it’s quite interesting seeing an automated drum and a scanner playing a familiar Christmas tune.  Check out the video of the duet in action!

A Radial Engine Model:

Through the process of experimentation, two “radial engine models” were produced.  The engine model shown above uses a gear-reduced motor to power it.  The other model uses CNC-cut gears and a motor from an air freshener!

Tips and Tricks on Repairing LCD Monitors:

So do you have a broken LCD monitor? Using techniques described in his post, [Neoxity] claims to have been able to repair 50 out of 60 broken monitors using techniques described on his blog.

Flex Cables:

While we’re on the subject of [Neoxity’s] page, why not check out his discussion on “flex cables” used for DIY.  Like the humble resistor, they’re not glamorous, but you’d be hard pressed to find an electronics assembly without one.

Illegal Numbers:

Although not a hack in itself, the “illegal number” is a really interesting concept (mentioned by one of our readers in the comments).  Since all data and programs can, at their core, be represented by a series of 1s and 0s, this can also be interpreted as a number.  Thus, some numbers actually represent copyrighted or trade secret data that would be illegal to possess.

Keeping Axolotl Healthy And Cool

December 21, 2011 by 44 Comments

The real life Mudkip Wooper Pokemon seen above is an axolotl, a salamander-like animal that lives in only one lake near Mexico City. These adorable animals can be bred in captivity, but keeping them is a challenge. [LRVICK] decided he didn’t want to throw down hundreds of dollars for an aquarium cooler so he built his own out of parts usually used for keeping computers nice and cold.

Commercial aquarium coolers that would meet the requirements start around $300 and go up from there. Not wanting to spend that much, [LRVICK] found a 77 Watt Peltier cooler for $5 and figured he could make it work. Off-the-shelf parts for water cooling CPUs were used to construct the aquarium cooler – a water block on the cold side, a huge heat sink and fan for the hot side, and a bunch of tubing goes up to the tank.

Now [LRVICK] has an axolotl housed in a very professional-looking aquarium that is a steady 65 degrees. He’s got a very nice build, and the axolotl looks very happy.

led-contacts

[Ben Krasnow] Sticks LEDs In His Contacts Just For Kicks

December 20, 2011 by 84 Comments

[Ben Krasnow] wrote in, saying that every so often, a news story appears covering a project in which researchers embed a single-pixel LED display inside a contact lens. The most recent article he saw featured a contact-wearing rabbit, and not being one to shy away from damaging his own body in the name of science, he decided to try the experiment on himself.

He started out by soldering a tiny 0402 SMD LED to a hand-wound coil, laminating the display between a pair of regular contact lenses. After trying to adhere the lenses to one another using water, he opted to tack the edges together with a pair of hot tweezers, making for a more secure but uncomfortable piece of eyewear. The LED is powered by a simple inductive coil he put together, which uses a spark gap transmitter to flash the LED on and off.

If you’re not freaked out by people sticking things in their eyes, be sure to check out the video below to see [Ben’s] augmented contact lens in action. While it might not give him Terminator-like vision, it’s pretty awesome considering he pieced it together in his workshop in his spare time.

Continue reading “[Ben Krasnow] Sticks LEDs In His Contacts Just For Kicks” →

Keep Others From Snooping In Your Digital Life

December 20, 2011 by 21 Comments

In our digital age prying eyes are everywhere. The sad thing is that they may even belong to your own government. But no matter who it is, there are some things you can do to keep your private digital devices and content as secure as possible.

The link above goes to [Jerry Whiting’s] discussion on the topic. He’s certainly an interesting speaker, but make sure you’re using headphones at work as the language can be a bit sultry once in a while. He aims the lesson at the Occupy movement, but it’s a fun listen for any conspiracy theorist out there. The topics run the gamut, starting with the specter of physical access, then moving on to protecting your network through traffic analysis and using key pairs. This Security 101 segment comes in two parts (the first one is embedded after the break), each a bit more than thirty minutes. He’s planning to post a second lesson covering hashes and encryption. Continue reading “Keep Others From Snooping In Your Digital Life” →

Motorized Camera Mount Unexpectedly Popular For CNC-aimed Hardware

December 20, 2011 by 12 Comments

Here’s a camera mount that moves smoothly along a motorized sled. [Bart Dring] created the system and was surprised by it’s popularity, having received several sales requests from photographers. He originally designed the linear bearing system, called the MakerSlide as an inexpensive alternative to other CNC machine solutions. Allowing a computer to map out timed movements for video shots wasn’t on his radar then, but as you can see in the clip after the break, the MakerSlide does an amazing job at it.

The modular track system makes it easy to attach to a base. In this case, a couple of pieces of acrylic let him support both ends of the track on standard camera tripods. [Bart] mentions the knowledge gap between people who work with CNC milling hardware and photographers as an issue in deciding how to control the system. Since photographers aren’t likely to be proficient in EMC2, he designed a control application with an Arduino. It uses a stepper motor controller shield, and does some fancy math to make sure there is smooth acceleration, etc.

Continue reading “Motorized Camera Mount Unexpectedly Popular For CNC-aimed Hardware” →

Hack Removes Ads From Kindle ‘Special Offers’ Hardware

December 20, 2011 by 52 Comments

We figured it wouldn’t be long before someone figured out how to remove the ads from the ‘Special Offers’ versions of the Amazon Kindle hardware. There are two things that made this obvious to us, the huge flaw that lets code be easily run as root, and the MP3 tag forming that makes it possible to unlock the device.

[Pat Hartl] knows his way around a *nix shell, so once he gained SSH access to the device he started a search for the ad images that make up the special offers feature. He found them in a few different places, making backups of the files in an alternate location, then removing them with some simple commands. He even rolled the process into a one-click installer like the Jailbreak package. It makes us wonder if Amazon has a way to tell if your device is not longer pulling down content for these offers?

At risk of sounding preachy, Amazon does offer this hardware without ads for a one-time fee. Circumventing the unobtrusive ads may lead to higher hardware prices in the future, and [Pat] mentions that. He pulled off this hack to show the holes in Amazon’s security, and hitting them in the pocketbook is a powerful way to do it.

Hackaday itself is ad-supported. We run advertisements that do not use sound, popups, or flashing video effects. Remember to turn off your ad-block for our site in order to show your support. Thanks!