Adding A Keypad To A Key Card Lock

October 9, 2009 by 19 Comments

keypad

[Colin Merkel] had a little problem: he was continually forgetting his electronic key card, locking himself out of his own dorm room. Like any normal Hack a Day reader, rather than getting in the habit of always carrying his card, the natural impulse of course is to build this elaborate rig of electronics and duct tape. Right?

The result is an additional keypad that can be used to gain access…not by altering the existing electronic lock, but with a secondary mechanism that operates the inside door handle. An 8-bit PIC microcontroller scans the outside keypad (connected by a thin ribbon cable), and when a correct access code is entered, engages a 12 volt DC motor to turn the handle. It’s a great little writeup that includes a parts list, source code, and explains the process of keypad scanning.

It’s similar to the RFID-based dorm hack we previously posted. By physically operating the handle, most any approach could be used: facial recognition, other biometrics, DDR pad, or whatever inspired lunacy you can dream up.

Hulu Desktop For Linux . . . Finally

October 9, 2009 by 28 Comments

hulu

The folks over at Hulu Labs have been busy it seems, as they have just released a version of their desktop client for Linux. Windows and OSX versions of the desktop client have been out for some time now, but Linux has been left in the dark. Functionality wise, it operates and plays videos identically to its counterparts. The Linux version can also be controlled via an IR remote. We certainly are excited to add this to our entertainment systems. The release is a bit of a surprise, but a welcome change to the usual treatment of Linux, and it’s nice to see the mainstream start to recognize it. Plus, this is just more ammunition for getting rid of those monthly cable/satellite subscriptions.

Beauty In Destruction

October 9, 2009 by 49 Comments

[youtube=http://www.youtube.com/watch?v=QfDoQwIAaXg]

This is not a hack. In fact it’s a promotional montage for a collection of scientific equipment that few of us could likely afford. But like yesterday’s giant marionettes over Berlin, sometimes even a costly and delicately-orchestrated achievement transcends its own not-a-hack-ness, fulfilling our brains’ lust for wonderment all the same.

Kurzzeit of Germany produces ballistics measurement equipment. The video depicts various combinations of projectiles and targets at up to one million frames per second, revealing unexpected beauty in hitherto unseen phenomena, and is the best damn ten minutes you will waste on the internet all day!

Maggy, Locked And Loaded

October 8, 2009 by 18 Comments

maggy

Some readers may remember [Paul] from his project Jak, the blackjack robot; but his interests have moved toward coil gun creation. Maggy, his latest weapon, may not be the prettiest of coil gun we’ve seen, or the most environmentally friendly, but does look to be promising. Featuring a triple stage, logic based accelerator instead of the typical single stage, it can fire a 10 gram projectile (theoretically) up to 85 km/h! Check out how he’s gone from a single pistol to his current monster on his site, and a video of his work in progress after the jump. Continue reading “Maggy, Locked And Loaded” →

Giants Roam Berlin

October 8, 2009 by 27 Comments

b20_20607457

I can hear the comments now: “Not a hack.” Yeah that might be true, but it’s still enormous puppets running around Berlin – that in its own right is pretty cool. The show, put on by the street theater group Royal De Luxe, is part of the 20th anniversary for the fall of the Berlin Wall. Spectators watched as the Big Giant rose from the water in search of his niece, the Little Giantess. We won’t spoil the ending, but its a happy one. Reminds us of the similar giant marionette group La Machine, and their La Princesse.

A Stirring Hack

October 8, 2009 by 29 Comments

Stirring Flask

[Oleg] of Circuits@Home and maker of the USB Isolation Board and the USB Host Shield has a new, two-part hack for his chemistry set. In Part 1 of  this hack, [Oleg] discusses the method he uses to make a stir bar spin and what types of stir bars work the best. Part 2 discusses the motor control code and circuit. Given the ample amount of capability leftover in the Arduino he used, we would like to see this stirrer paired with a heating element to have a complete hotplate/stirrer. What do you think you could do with or to improve this device?

A Modular Halloween With Grid Beam

October 8, 2009 by 3 Comments

gridbeam

The fantastic Creatrope blog has a great article on quickly assembling animatronic Halloween gags using salvaged electric motors, pvc pipe, and “grid beam” construction.

Grid beam is a prototyping and building medium that’s like a giant hippie Erector set. You can’t buy grid beam, but with a drill press, a jig, and some square stock you can create your own unlimited supply. It’s ideal for “sketching” and temporary constructions like these Halloween props. After use, everything can be dismantled, stored flat, and later reused for the next [Herbie Hancock] music video creative project. Looks like fun!

The article wraps up with some valuable pointers on getting started with grid beam and where to acquire parts.