Volver

July 20, 2009 by 17 Comments

[youtube=http://www.youtube.com/watch?v=JmkW5PpjfNg]

Volver is a 3.75 inch square LED matrix that will display over 1600 unique patterns. Designed by members of Image Node and Disorient, it is a fundraiser for burning man 2009. While it is certainly less colorful than its older sibling the Nodeblinky, it features 8 more LEDs and a bit smoother and faster graphics. Volver can be picked up as a kit, or fully assembled from their site. Just like last time, you don’t have to buy from them. They freely offer the source code and schematics.

Touchpad And VFD Hacking

July 20, 2009 by 17 Comments

p2 (Custom)

[Agent420] brought up this touchpad and VFD hack in the comments on our capicitive sensor guide post. He had broken dell laptop from which he harvested the touchpad and an HP laserjet that contributed the VFD. Though the touchpad communicates using standard PS2 protocol, he wanted to use it with his Atmel 8535 AVR which required him to write some custom code. In the picture above, you can see the VFD displaying the coordinates of his finger. You can download his code as well as the spec sheets for the different pieces on the project thread.

Home Automation Via Twitter

July 19, 2009 by 25 Comments

[youtube=http://www.youtube.com/watch?v=PVm1VKB43ww]

We’ve seen tons of stuff hooked up to send updates to twitter when something happens. That’s what we expected when we first read this tip from [Matt]. We were pleasantly surprised to see he’s actually doing the opposite. He has rigged several items to an IoBridge module and he can control them by sending tweets to his account. In the video you can see him sound a buzzer and change a display on an LCD. Its nice to see twitter being used as part of the control as opposed to updating us every time someone flushes.

Cyclonic Dust Seperation

July 19, 2009 by 23 Comments

[youtube=http://www.youtube.com/watch?v=g6j-psU1aWs]

[Don] was having issues with dust when working with MDF. He had a shop vac overheat and die because of it. When looking for solutions, he saw several systems that used cyclonic dust seperation. Not wanting to buy something he could make for cheaper, he left the store and started scrounging parts. You can see his home made system in the video above. This seems like an absolute must have item for any workshop. Great job [Don].

Capacitance Sensor Guide (AD7746)

July 18, 2009 by 20 Comments

capacitive_sensor

[Marcus] has written up his experiences using the AD7746 capacitance sensor. He used the SparkFun breakout board in conjunction with an Arduino. The available Arduino code wasn’t that great so he rewrote it to be easier to understand. The AD7746 is an I2C device that can be continuously read, but this doesn’t mesh well with the Wiring libraries. Additionally, the calibration routine from the data sheet is difficult to understand. He’s included all of the code he used plus a Processing sketch to help visualize the input which will hopefully make your experience with the chip much more smooth.

Visual Hardware Identification Guide

July 18, 2009 by 32 Comments

hardwareguide

Check out this visual hardware guide from deviantART member [Sonic840]. It has everything from memory modules, to bus sockets, to power connectors, to an entire array of CPU sockets that have been used over the years. You’re bound to see something in there you didn’t know existed.

[via Gizmodo]

Toilet Paper Dispenser

July 18, 2009 by 47 Comments

[youtube=http://www.youtube.com/watch?v=QTsXlTKaFq0]

Solving the age old problem of… wait, what problem are they solving? These students at UC Berkeley have built a toilet paper dispenser prototype. Not only does it meter out an exact amount for you, it will fold it and cut it as well. They mention this being the perfect accessory for a high tech bathroom, and we can agree. To be serious though, in public places, metering out limited amounts of toilet paper at a time could possibly result in major cost savings. We think the next prototype should have different preference settings such as; wadded, folded, or wrapped around your hand. Anyone else’s mind suddenly filled with unpleasant imagery?

[via Makezine]