Replacing A Point And Shoot Lens

March 9, 2009 by 19 Comments

cockeyed

Cockeyed.com is a peculiar site. It is spattered with links in an almost unintelligible manner, but if you dig hard enough, or just click randomly, you can find some pretty fun stuff. One nice writeup they’ve done is how to replace the lens in their point and shoot camera. This one happens to be a Canon Powershot sd750, but it will give you an idea about how difficult it can be for any point and shoot. The lens assembly couldn’t be replaced until almost every single piece had been disassembled. There are tons of pictures showing the process and the final result. Though the install was a success, his replacement lens was already beat up pretty bad. Looks like he’ll have to go through it all again.

[via The Old New Thing]

24 Solid State Drives In Raid

March 9, 2009 by 63 Comments

[youtube=http://www.youtube.com/watch?v=96dWOEa4Djs]

In a time when marketing is all around us, companies often have to come up with new and creative ways to get us excited. Some go the viral route, others hire famous spokes people. Samsung did well with this idea. Let some computer geeks build something awesome and have fun with it. They chained 24 drives together to create a whopping 6Terrabyte array. They run various speed tests and even test the drive integrity by bouncing on a trampoline while dangling them from their chords. Yeah, they make the computer geeks a little geekier than they need to be, but who didn’t get excited to see those transfer speeds?

Parts: 4×4 RGB Button Pad Controller SPI

March 9, 2009 by 2 Comments

cover

We covered SparkFun’s new RGB button pad controller a few weeks ago. This is a full-color clone of the monome interface; a 4×4 grid of buttons with tri-color LEDs underneath. Each LED has 24bits of color control, for more than 16million color combinations. Up to 10 panels can be chained together to create huge button grids, like SparkFun’s Tetris table. We previously used a smaller version in our RGB combination lock.

We asked SparkFun to send us the SPI version of the button controller to test. This is a new product developed in-house at SparkFun, with open source hardware and software. Read about our experience interfacing this board below.

Continue reading “Parts: 4×4 RGB Button Pad Controller SPI” →

Motion Detecting Cat Toy

March 9, 2009 by 15 Comments

[youtube=http://www.youtube.com/watch?v=DFX8vSw42DY]

We love our pets, but sometimes we just can’t keep up with them all the time. Sometimes, we need some automated playmates for our furry pals. [Kateham] has built a motion detecting cat toy to keep their cat content and active. Their price list was roughly $5 for the whole project, but they did obtain things like microcontrollers from family members. Some places they did manage to cut costs were to harvest various parts from a VHS deck. Its great to see kids not only hacking, but recycling as well. Great job [Kateham]. This project is like a simpler version of the laser pup.

Model Rocket GPS And Data Logger

March 8, 2009 by 23 Comments

datalogger

Serious rocket hobbyists aren’t content with merely launching their rockets into the air. [wwgd] wants to have an on board computer to control his flights and log the data.  He doesn’t quite know how to do it all yet, so he’s starting with the basics. He has built the basic GPS data logger using an accelerometer, a GPS unit, and a BS2P microcontroller. The overall weight is 62 grams and it can record for the whole 5 minute flight. At roughly $200 though, we’d be thinking twice before launching it into the stratosphere.

STK500 As An Arduino

March 8, 2009 by 5 Comments

stkarduino

The AVR STK500 has been Atmel’s standard AVR development platform for many years. Recently though, hobbyists have embraced the Arduino. [Alessandro] has decided to bring the two together so that you can use the Arduino environment with the STK500. Unlike the Arduino, it comes with 8 LEDs, 8 switches, a variable power supply, and variable analog reference. It’s a great way to get hardware you might already have back into service.

Remote Image Processing In JavaScript

March 7, 2009 by 2 Comments

[youtube=http://www.youtube.com/watch?v=u3_cFel26J8]

[Tom] wrote in to tell us about his JavaScript project for motion detection. It ties together two ideas we’ve talked about recently. The first is doing image processing in-browser using Canvas(), which we’ve seen employed in captcha breaking. The second is offloading heavy processing to browsers, which we saw recently in the MapReduce implementation. [Tom] is using JavaScript to compare consecutive images to determine if there’s any motion. He did this as part of MJPG-Streamer, a program for streaming images from webcams. It can run on very limited hardware, but image processing can be very intensive. Doing the image processing in-browser makes up for this limitation and means that a custom client program doesn’t have to be written. You can find the code here and a PDF about the proof of concept.