Temperature Sensing Munny

February 18, 2009 by 7 Comments

munny

Here’s another nerdy present that was built for Valentine’s Day. [João Silva] created a temperature sensing Munny. A Munny is a vinyl toy made to be customized. Other than these Munny speakers, we haven’t seen them in many electronics projects. The LM35CZ temperature sensor has an analog output that connects to the ADC on the ATtiny15L. The microcontroller changes the RGB LED’s color based on the temperature: blue for cold, green for comfortable, and red for hot. It only flashes every three minutes to conserve the power in the coin cells. His one-off circuit board also includes an ISP header for programming. The Munny’s head looks like it does a great job diffusing the light.

Dirk’s Accident

February 18, 2009 by 57 Comments

fingermag

Warning: this link contains graphic images depicting removal of a fingernail by giant freaking magnets. [Dirk] likes to collect odd things. A few of those odd things, just happen to be massive Neodymium magnets. Even though he was really really careful, somehow two of them ended up close enough to attract each other. After a brief flight, the two collided with his finger tip in between them. It is probably still there now.

We know these things can be pretty dangerous and usually warn people when doing projects that require them, like building a wind turbine.

LCD Repair

February 18, 2009 by 42 Comments

lcd

[Andrew] sent us this great breakdown of an LCD monitor repair. After his wife’s monitor developed an issue with rippling in the picture, he was forced to decide between trashing it, or fixing it. He decided for the latter, possibly to his wife’s disappointment. The rippling image could easily be attributed to a failed filter in the power supply. Knowing that capacitors are a prime suspect in these cases, he tore in, looking for failures. He found that there were, in fact, 2 bad capacitors on the back light circuit. After replacing them with newer, higher quality ones, the monitor was as good as new.

SparkFun Stencil And Solder Paste Class Notes

February 17, 2009 by 15 Comments

stencil

Hobby electronics manufacturer SparkFun has started offering various classes at their Boulder, CO facility. [Landon] has been attending as many as possible and posted about his experience during their Stencil and Solder Paste class. Solder paste is used when manufacturing boards with a reflow oven. He took quite a few pictures of the process and posted notes and audio. He says it’s definitely something you’d have to learn hands-on, but his numerous photos give you an idea of what’s involved. Below, you can watch a video of the paste clean-up pass and stencil removal.

Continue reading “SparkFun Stencil And Solder Paste Class Notes” →

Hackit: Hackable Bluetooth Bracelet?

February 17, 2009 by 63 Comments

bluetooth-1

We spotted this odd piece of geek couture on DVICE today. It’s a bracelet that displays incoming calls via Bluetooth and also vibrates. The intended use is kinda interesting, but we wonder what else could be done with it. Could you update it with any text you want by creating fake caller ID messages? You could have your laptop in your backpack and have the bracelet update when it finds an open access point or any other sort of notification. The display shows the word “Connecting” in pictures, but apparently only displays numbers for incoming calls. It also includes a button to reject calls.

Do you have a project that needs a wireless display? Are there other options like this? At $25, this might be worth a try.

Cell Phone Triggered Fireworks

February 17, 2009 by 68 Comments

remote_trigger

[Mr. Hasselhoff] is using a disposable cell phone to trigger his fireworks. He has wired into the speaker leads for the speaker phone. When the phone rings, the current sets off a thyristor allowing for a battery pack to be discharged into a rocket fuse. These fuses heat up and ignite, so you can use them to light fireworks fuses pretty easily. This is pretty simple and cheap, considering the price of the cell phone was only $10. His next idea was to have it recognize dial tones and set individual fuses off, but that would require a microcontroller and a much more complex hack. At that point, you might as well just build a fully fledged wireless fireworks launching system and possibly add rocket launching abilities too.

[thanks Adam]