[wonder] sent in an interesting proof of concept how-to on setting up a virtual raid 5 drive that uses free ftp servers to store data. The technique is a bit round-about, but he says it works pretty decently. The shares are mounted under windows with netdrive, then raided by FreeNAS under VMware. I haven’t tried it myself, but I’d probably try to do the same thing, but use LUFS and do everything under one operating system.
Wiimote Head Tracking Desktop VR Display
[youtube=http://www.youtube.com/watch?v=Jd3-eiid-Uw&rel=1]
If you thought [Johnny Lee] was done making us all buy Wiimotes, you were wrong. Now he’s back showing off a simple, but incredibly effective VR head tracker. He swapped out the LED’s on a pair of LED light safety glasses with a set of IR LEDs and used his PC/Wiimote combo to do the work. The demo is just fantastic. As usual, you can download the software from his project page.
Talcum Powder Print Bot
It’s been a while since we’ve seen a new print bot idea. [Kyle] sent in his groups final project at Georgia Tech. An ever so handy iRobot chassis, a dot matrix printer carriage and motorized drill bit in a funnel strategically dispenses talcum powder to print messages or images on the floor. Just think, one robot can write all over the floor and the other one can clean up afterward. How long until some sports geeks build a bigger one to deface a football before a big game?
Silent X10 Mod (cheap SSR)
I’m feeling a bit retro for the holidays, so here’s another classic: If you’ve got a non-dimming X10 switch, you’ve experienced the incredibly loud, obnoxious sound that it makes when you switch it on or off. (Mine’s in my stairwell) There’s a simple mod to silence the thing: remove the triac relay and replace it with a solid state relay. SSRs are a bit expensive, running at least $10 each last time I checked. [Willis Dair] realized that he could build his own, inexpensive SSR with an optoisolator and an alternistor(AKA Triac). The resulting circuit runs about $3 in parts.
PID Controlled Popcorn Popper Coffee Roaster
In honor of my espresso machine being fully plumbed in (water supply and drain line!) it’s time for another coffee hack. When I wrote my basic coffee roaster how-to, I seriously thought that I’d never see anyone do this, but [] installed a programmable PID controller on his popper coffee roaster setup. This particular PID can be programmed to ramp the temperature over time to create an actual roasting profile, rather than manually adjusting the set points. The original page was here, but I had to pull it out of the internet archive.
Nightvision Car Heads Up Display
[alti] wants night vision for his car, so he picked up a nightmax night vision camera that has a built in LCD. The plan is to mount the display so that it will reflect off the windshield of his car to create a simple HUD. Unfortunately the image gets reflected from the inside and outside of the windshield. The discussion in the forum is getting pretty lengthy, but it’s an interesting project.
