[exhaltingidiotz] is just one of the guys who’s built his own wakeboard winch. These things are pretty low tech, but using a winch to wakeboard has to be one of the most original ideas that I’ve seen in a while. Winches have some interesting advantages over boats: less fuel, no licensing and shallow water that no boat or jet ski would ever work in suddenly becomes usable. Here’s a basic design that’s typical and a simple demo video. The forums are a bit annoying to search for info, so here’s a fantastic winch build writeup.
DIY Home Theater Preamplifier
[Dane] built this excellent home theater pre-amplifier. He used [Mark Hennesy]’s pre-amp design to start with, and added selectable XLR, RCA, SPDIF and even USB audio inputs. Discrete inputs from his DVD player provide surround input, and an analog matrix creates 7.1 surround from the 5.1 input. The design is very elegant, and even uses a VFD display that appears blue with some filters. I usually just buy my HT gear, but projects like this make me seriously consider re-building my entire HT from scratch.
24C3 Build Your Own UAV
The 24th annual Chaos Communications Congress in Berlin is already off to a great start. The first talk we attended was [Antoine Drouin] and [Martin Müller] presenting Paparazzi – The Free Autopilot. Paparazzi is an open source hardware and software project for building autonomous unmanned aerial vehicles. The main hardware board has an ARM processor and GPS. It uses inertial and infrared sensors to determine orientation and altitude. The four infrared thermopiles measure the air temperature. The ground is warmer than the sky and if you compare the temperature in the direction of each wing tip your can tell what angle the airplane is at. It’s really that simple.
They did a pretty amazing live demo. Using the network connection they controlled a UAV flying in France and another in Germany. Both planes were streaming live video from belly mounted cameras. One relaying through a home DSL connection and the other through a UMTS cellphone. They were able to change way-points on the fly and issue flight pattern commands. There is a ground crew at each location with a security pilot that will switch the controls to manual if things get out of hand.
Arduino Controlled Espresso Machine
The arduino is really starting to become prevalent for hardware hacking. [Nash] used one to take control of his Gaggia espresso machine. (They’re really decent little machines) He popped in a LCD display, some solid state relays to control the pump and the heating element, and an AD595 to interface a K type thermocouple. It looks like an excellent hack, but for the love of god man – get a better grinder!
He describes the original mod here, and added a small gallery of internal shots here. From the latest comments, it looks like the guys are RepRap project are even interested in the thermocouple PID control that [Nash] implemented.
Holiday Hackit: Automated Hard Drive Destruction
One of our recent posts took an interesting tangent: physical hard drive destruction. First, [wolf] wanted to use a 20ga shotgun shell on his hard drive. [brk] suggests an electromagnet applied to the drive while it’s still spinning. Everyone thought thermite might be interesting… Finally, [wolf] noted this commercial auto destruction drive that floods itself with an acid mist. I’ll suggest a few ideas and let you guys take it from there.
I’d suggest pneumatic injection of two part epoxy into the drive mechanism. Remove the top of the casing using the diy clean room method, add a port for the epoxy and use a cheap CO2 bike injector to force the liquid into the drive on demand.
So, got a better idea? Let’s hear it.
DIY IPod DAC Modding
Red Wine audio offers the iMod – a service that modifies the DAC in 4th, 5th and 5.5th generation iPods. Despite requiring some fine work, the mod isn’t that difficult. [joneeboi] sent in his DIY DAC mod how-to, and even better, it’s suitable for 3rd gen and 1st gen Nanos. The audio signal is tapped directly after the DAC, and the SMD capacitors in the iPod are replaced with high end Black Gate capacitors. This is just the mod feed the best possible signal to your headphone amp
The JediPad AKA Uber-gyro-mouse
[Samu] sent in his freaking awesome JediPad mouse creation. It’s got seven touch-point style mouse buttions, as well as a pair of gryroscope sensors. Each touch-point has it’s own micro-controller and the signals are input to the computer via USB. He’s looking for help, so shoot him an email if you’re interested.
Check out his demo video after the break.
