Trinket EDC Contest – The Deadline Approaches

January 1, 2015 by Adam Fabio 2 Comments

We’ve got just under 2 days left in the Trinket Everyday Carry Contest. With 79 entries, and t-shirts going to the top 50 entrants, you’ve got pretty darn good odds of getting a shirt out of all of this! The design is great too, [Joe Kim] really did a great job with it!

shirt-low

The idea is simple: Build small, pocketable projects which are useful everyday.

We explained everything in our announcement post, and the full rules are available on the contest page. But just as a reminder, the main requirements are

The project Must use a Pro Trinket, or a board based on the open source Pro Trinket design.
The project must have at least 3 project logs
The project must have at least one video
The Hackaday.io project must include enough documentation to allow an average hobbyist to replicate the project

There are already some awesome entries vying for the top prize, but who knows – someone may come out of nowhere and walk away with a sweet Rigol ds1054z oscilloscope!

The contest deadline is January 3rd, at 12:00 am PDT. The clock is ticking, so stop waiting, and go build something awesome! Good luck to everyone who enters!

TRINKET EDC CONTEST DRAWING #5 RESULTS

December 30, 2014 by Adam Fabio 4 Comments

The final random drawing for Hackaday’s Trinket Everyday Carry Contest was held tonight, and the winner is [flaming_goat] with Trinket Pocket IR Analyser/Transmitter!

In addition to having an awesome username, [flaming_goat] loves IR protocols. Trinket Pocket IR Analyser/Transmitter is a standalone device to read, analyze and transmit Infrared (IR) signals. The IR portion of the project is handled by a Vishay TSOP38238 (PDF link) The 382 series is a 3 pin module. It comes in several variants, each tuned to a specific carrier frequency. The 38238 will decode IR signals at 38 kHz.

The demodulated IR signals are fed into the Pro Trinket, where they can be analyzed. Data is either sent through the serial terminal or displayed on the on-board 1.44″ TFT LCD. Source code for the whole project is up on [flaming_goat’s] GitHub repo.

[flaming_goat] will be receiving a Teensy 3.1 and an Audio+SD adapter from The Hackaday Store. If the Pro Trinket is a gateway drug, then Teensy 3.1 is the hardcore stuff. Powered by a Freescale Kinetis ARM Cortex M4 processor in a tiny package, the Teensy 3.1 packs quite a punch. You might think all that power would mean complex tools, but Teensy 3.1 is still easy to program using the Arduino IDE. The Audio+SD adapter board gives Teensy 3.1 the ability to create some pretty decent audio, thanks to the Teensy Audio Library.

This was the last weekly drawing for the Trinket Everyday Carry Contest, but there is still time to enter and win the big prizes! The deadline is January 3 at 12am PDT. That’s just about 3 days to enter – so procrastinators, get in the game!

Trinket EDC Contest Entry: Shorty

December 29, 2014 by Adam Fabio 9 Comments

Sometimes finding a short-circuit is easy, especially after the magic smoke has escaped. Finding a short on a newly etched or milled board though, can be a maddening task. Many of us have been there – wrestling with multimeter probes under a magnifier trying to find the offending bit of copper that is the source of all our problems. [Jaromir] designed Shorty to make this task a little bit easier.

Shorty is a short-circuit finder – but it’s not exactly like the one you would find on a typical multimeter. [Jaromir] used MCP6041 Op-Amp to detect resistances down to the order of tens of milliohms. Determining an exact resistance measurement at these levels would require a heck of a lot of calibration. When looking for a short though, [Jaromir] is only concerned with the relative value – is he getting closer to or further away from the short. He determines this by sound. The Op-Amp output is sent to the Pro Trinket’s ADC input. The trinket drives a speaker with lower or higher tones based upon the ADC voltage. Much like the childhood game of “hot and cold”, Shorty will direct you right to your short!

There’s still time to enter the Trinket Everyday Carry Contest. The main contest runs until January 2, but we’re having random drawings every week! Don’t forget to write a project log before the next drawing at 9pm EST on Tuesday, December 30th. You and all of the other entrants have a chance to win a Teensy 3.1 from The Hackaday Store!

Trinket EDC Contest Entry: Can I Borrow A Feeling?

December 24, 2014 by Kristina Panos 11 Comments

We got a case of the Mondays just reading about [Sascha]’s work environment. Get this: every morning, first thing, the whole team gets together to check in and share how they’re all feeling. And they can’t even be candid about it—there’s actually an approved list of feeling descriptors, both good and bad. It’s an admittedly big list that includes, interestingly enough, both ‘tortured’ and ’embarrassed’. Yeah. We think something like group t’ai chi on the roof each morning sounds a lot more relaxing. Since [Sascha] is between a rock and a hard place on this one, it was time to let chance take over. He raised his HaD-imprinted Trinket skyward and Can I Borrow a Feeling? was born.

The gist is simple: [Sascha] abstracts his disposition out to either ‘good’ or ‘bad’ and pushes the corresponding button. The Trinket accesses an array and returns a randomly selected feeling to the LCD. Since the official list of feelings is about 300 words long, [Sascha] has to push the data into PROGMEM. He used good old Excel to split the list in twain, and her formulas came in very handy for centering the result on the LCD. Once [Sascha] knew how it would all fit together, he designed a cool enclosure in CorelDRAW and turned on the laser cutter. See the Spreadsheet of Acceptable Words for yourself on GitHub, and pick up the code and enclosure file while you’re there.

$50k In Components Hit The Hands Of Hackaday Prize Semifinalists

December 22, 2014 by Mike Szczys 12 Comments

We anticipate a cornucopia of hacks from the top fifty 2014 Hackaday Prize entrants based on the recent awarding of the 50 grab bags of electronics. That’s right, the grand prize was out of this world but there were a lot of other rewards worth shooting for. Instead of making hardware choices without the seminifinalists’ input we went with a shopping spree on Mouser.com.

It’s a great idea if we do say so ourselves. However, it turned out not to be as easy as purchasing fifty-grand in gift cards. Did you know that none of the major parts distributors have gift card systems built into their sites? We’re of two minds on this. We’d love to open a birthday card from grannie and pull out some chits that can be traded for chips. But at the same time, it would be a longshot for your non-hacker relatives to even know what sites are our go-to parts emporiums.

Long story short these prizes are themselves a hack. We had a lot of help from the sales crew over at Mouser who abused their account tracking software in order to make these credits work. All fifty of the Hackaday prize semifinalists now have a cool G to spend and we’ll be watching their Hackaday.io accounts for updates as they inevitably use the upcoming holidays to embark on exciting builds.

A big thanks to Supplyframe Inc. for sponsoring these 50 prizes, as well as all others awarded for the 2014 Hackaday Prize. Get those workbenches cleared off and ~~sharpen~~ tin your soldering tips because details about the 2015 Hackaday Prize will start to roll out in just a few weeks. Until then, occupy your time trying to win one of the many prizes offered during our Trinket Everyday Carry Contest.

TRINKET EDC CONTEST ENTRY: Lazydoro

December 19, 2014 by Adam Fabio 3 Comments

[Vasilis] has entered Lazydoro in the Trinket Everyday Carry Contest. Lazydoro is designed to get him up off his backside, and walking around. Recent medical research has determined that sitting too long is a bad thing. In fact, Dr. David Agus has been quoted by Nike as saying that sitting for several hours is as bad as smoking (wayback machine link). While we’re not exactly up on the latest medical trends, we can definitely see that getting up and walking around a bit never hurt anyone. Lazydoro will alert [Vasilis] once every 20 minutes or so to get up and stretch his legs a bit.

[Vasilis] plans to pair a Pro Trinket with an accelerometer module, specifically an ADXL377 from Analog Devices. The accelerometer will allow Lazydoro to determine if [Vasilis] has moved around. If 20 or 30 minutes go by without major movement, Lazydoro will nudge him to get up and take a walk.

Since shipping to Greece takes awhile, [Vasilis] is developing with an Arduino Uno and a ADXL345 while he waits for his parts to arrive. He’s hacked this into a wrist mounted device for testing. One thing [Vasilis] hasn’t figured out yet is how to alert the user to move around. A small vibrating motor would probably work – but we’d suggest electric shocks. A good zap always puts the spring in our step!

There is still plenty of time to enter the Trinket Everyday Carry Contest. The main contest runs until January 2, but we’re having random drawings every week! Don’t forget to write a project log before the next drawing at 9pm EDT on Tuesday, December 23. You and all of the other entrants have a chance to win a Cordwood Puzzle from The Hackaday Store!

Trinket EDC Contest Drawing #3 Results

December 16, 2014 by Adam Fabio 6 Comments

We’ve held our third drawing for the Trinket Everyday Carry Contest. Once again we’ve used a Pro Trinket to pick the random winner. This week’s winner is [Scissorfeind] with his project Stylin’ safety jacket

In true hack style, [Scissorfeind] went into this project with two goals: A jacket that will be visible at night, and keep him “looking f*cking sick”. The jacket itself is a faux leather affair from a thrift store. [Scissorfeind] added some studs for bling, and he’s working on adding a ton of electronics for light.

The Pro Trinket will be driving a series of LED matrices, which [Scissorfeind] is working on turning into POV displays. The matrices come from an LED clock which [Scissorfeind] saved from the landfill. In fact, most of the parts in the jacket are upcycled from e-waste. The jacket is just starting to come together. We can’t wait to see the final results!

We hope that [Scissorfeind] enjoys his Bus Pirate V3.6 from The Hackaday Store. The Bus Pirate was designed by former Hackaday writer [Ian Lesnet] as a Swiss Army knife of electronic communications. If you’re trying to connect to a circuit with SPI, I²C, JTAG, or UART, the Bus Pirate has you covered. It can do plenty more though – from reading analog data to programming components. Check out [Brian Benchoff’s] full review on the Bus Pirate V3.6 product page!

If the pseudo random number gods didn’t smile on you this week, don’t worry, there are still two more chances to win a random drawing! Our next drawing will be on 12/23/2014 at 9pm EST. The prize will once again be a Cordwood Puzzle! To be eligible you need to submit your project as an official entry and publish at least one project log during the week.

The main contest entry window closes on January 2, 2015 – but don’t wait for the last minute! Hit the contest page and build some awesome wearable or pocketable electronics!