Lifehacks

297 Articles

Stop Touching My Face

July 13, 2021 by 12 Comments

We all have a habit or two that we’re not terribly proud of and have probably thought of any number of ways to help rid ourselves of them. Well, [Friedlc] wondered if he could create a mechanism that would get him to stop touching his face using a bit of negative conditioning. He rigged up a head brace that slaps his forehead whenever reaching for his face.

The first thing he needed to do was to detect a hand approaching his face. He decided to use a few cheap IR motion sensors he had laying around but noted they had a few limitations. He had a tough time tuning the sensitivity of the motion sensors to prevent false positives and they were completely useless in direct sunlight as the sun’s radiation saturated the photodetector. Despite these problems, [Friedlc] figured he would mostly need his device indoors so he stuck with the IR detectors.

For the “hitter” as he called it, he thought of a few different ideas. Maybe a rotating drum with a flap that would hit his hand or maybe a hitting arm on a bar linkage. He admitted that his rudimentary mechanical design knowledge made thinking of the perfect “hitter” a bit challenging, but like any good hacker, [Friedlc] just kept working at it. He decided on using a cam mechanism which allowed him to separate the motor from the hitting action. This choice actually put a lot less load on the motor which kept the motor from stalling and giving him other kinds of trouble.

[Friedlc] was pretty proud of his invention and noted that it really helped him stop touching his face as the successive strikes to the head were definitely quite a deterrent. This certainly isn’t the first time we’ve seen a Pavlovian Conditioning project on Hackaday. We could probably all use a bit of help curing a few bad habits. But maybe you prefer positive reinforcement instead.

Continue reading “Stop Touching My Face” →

Hamster Trades Crypto Better Than You

July 7, 2021 by 19 Comments

The inner machinations of the mind of cryptocurrency markets are an enigma. Even traditional stock markets often seem to behave at random, to the point that several economists seriously suggest that various non-human animals might outperform one market or another just by random chance alone. The classic example is a monkey picking stocks at random, but in the modern world the hamster [Mr Goxx] actively trades crypto from inside his hamster cage.

[Mr Goxx]’s home comprises a normal apartment and a separate office where he can make his trades. The office contains an “intention wheel” where he can run in order to select a currency to trade, and two tunnels that [Mr Goxx] can use to declare his intention to buy or sell the currency he selected with the wheel. The wheel is connected to an Arduino Nano with an optical encoder, and the Nano also detects the hamster’s presence in the “buy” or “sell” tunnel and lights up status LEDs when he wants to execute a trade. The Nano also communicates with an intricate Java program which overlays information on the live video feed and also executes the trades in real life with real money.

Live updates are sent directly both on Twitter and Reddit, besides the live Twitch stream of [Mr Goxx] we linked above. The stream only shows his office and not his apartment, and he’s mostly active at night (Berlin time). But we can’t wait for his random walks to yield long-term results which can be analyzed for years to come. In the meantime we’ll see if others have been able to make any profits in crypto with any less-random methods.

We All Need A Win Sometimes, So Make Them Yourself

June 28, 2021 by 39 Comments

We all need the occasional win when it comes to work or personal projects. Being able to feel that payoff of progress and satisfaction is deeply important, because if everything is always uphill, that’s a recipe for burnout. Avoiding that is important enough to explore how to set oneself up for a few easy wins.

Getting the occasional win helps us stay motivated, creative, and fulfilled. Meaningful work can deliver on this, but many of us rely on hobbies to make up any shortfall. Sometimes, that isn’t enough. Hobbies themselves can end up feeling like a chore, and when that happens, they cease to provide respite. The good news is that I believe it is possible to exploit the benefits of hobbies to deliver supplemental “wins” when they are needed most, and I’ll explain how.

I have found that successes do not have to be hard-won in order to be beneficial, but they do need to be relevant to one’s passions and interests. So, when naturally-occurring successes come too few and far between, and hobbies aren’t doing the trick, use knowledge of yourself to stack the deck for some easy wins. It can tip the scales towards feeling meaningful progress and fulfillment in the face of what could otherwise lead to burnout. Continue reading “We All Need A Win Sometimes, So Make Them Yourself” →

Rock-A-Bye Baby, On The Mechatronic Crib Shaker

June 20, 2021 by 13 Comments

While an engineering mindset is a valuable tool most of the time, there are some situations where it just seems to be a bad fit. Solving problems within the family unit would seem to be one such area, but then again, this self-rocking mechatronic crib seems to be just the cure for sleepytime woes.

From the look of [Peter]’s creation, this has less of a rocking motion and more of a gentle back-and-forth swaying. Its purpose is plainly evident to anyone who has ever had to rock a child to sleep: putting a little gentle motion into the mix can help settle down a restless infant pretty quickly. Keeping the right rhythm can be a problem, though, as can endurance when a particularly truculent toddler is fighting the urge to sleep. [Peter]’s solution is a frame of aluminum extrusion with some nice linear bearings oriented across the short axis of the crib, which sits atop the whole thing.

A recirculating ball lead screw — nothing but the best for [Junior] — and a stepper drive the crib back and forth. [Peter] took care to mechanically isolate the drivetrain from the bed, and with the selection of the drive electronics and power supply, to make sure that noise would be minimal. Although thinking about it, we’ve been lulled to sleep by the whining steppers of our 3D printer more than once. Or perhaps it was the fumes.

Hats off to [Peter] for a setup that’s sure to win back a little of the new parent’s most precious and elusive commodity: sleep.

Wood And Brass Drink Temperature Monitor Looks Good, Has Class

June 16, 2021 by 7 Comments

We’ve all been there. Your current project has hit a wall, or the next step will take days to complete, and you need something to do in the meantime. So you start a project that you envision will fit nicely in the gap, and then, inevitably, it doesn’t. Maybe it even takes so long that the original project gets finished first. So what? There’s nothing wrong with that, especially when the filler project turns out as well as this drink temperature monitor disguised as a circuit sculpture (video, embedded below). Just put your mug on the coaster, and the weight of it activates a hidden switch, which causes the sculpture to display its secret LEDs.

[MakeFunStuff] wanted to make something that looked less like a circuit and more like art, while building a tool that could determine the relative hotness of a beverage. Such a a useful circuit sculpture sounds like a tall order to us, but [MakeFunStuff] pulled it off with finesse and style.

The circuit is based around this Sputnik-looking standalone IR temperature sensor which, as [MakeFunStuff] aptly describes, is “a single-pixel infrared camera that picks up everything in a 90° cone starting at the sensor.”

[MakeFunStuff] paired this easy-to-use sensor with an Arduino Nano and five LEDs that show how hot a beverage is on a scale from 1 to 5. The sensor is hidden in plain sight, suspended from the top of the brass rod sculpture and blending in perfectly. We love that the LEDs are hidden behind a thin layer of carefully-drilled wood and agree that a drill press would have been much easier.

The code is set up for just about every temperature scale from Celsius to Rømer, so that solves that argument. [MakeFunStuff] went with the Kelvin scale because science. Our favorite thing about this video is that [MakeFunStuff] shared their failures and fixes as they built their way toward answering the questions of how to suspend the sensor over the drink, and how best to display the heat level while hiding the electronics. Go grab a hot cup of something and check it out after the break while you let it cool off the normie way.

We admit that we would likely zone out while waiting for the LEDs to disappear. Here’s a smart coaster that uses an ESP8266 to send a message to Discord when your beverage has reached the perfect drinking temperature.

Continue reading “Wood And Brass Drink Temperature Monitor Looks Good, Has Class” →

Friendly Webcam Robot Keeps An Eye On Privacy

June 14, 2021 by 8 Comments

Wouldn’t it be nice if every webcam had a hardware switch? Especially for those built-in webcams like the one in your laptop. Since they don’t have switches yet, we’re just stuck trying to remember to turn them off or re-apply the sticker after every meeting. [Becky Stern] was tired of trying to remember to blind the all-seeing eye, and decided to make a robot companion that would do it for her.

Essentially, a servo-driven, 3D-printed eyelid covers the eye’s iris and also the web cam directly underneath. At first, we though [Becky] had liberated the business parts of a cheap webcam and built it into the eyeball, but this is far less intrusive. The eyeball simply sits atop the monitor, and [Becky] can control the eyelid two ways: she can set a timer with the potentiometer to close it automatically after some number of minutes, or else do it on demand using the momentary button. We’d love to see it tied directly to Zoom and or whatever else [Becky] uses regularly. Be sure to check out the build and demo video after the break to see it in action.

We love this cute and friendly reminder that the camera could be watching us. It’s way less creepy than this realistic eyeball webcam that looks around and blinks.

Continue reading “Friendly Webcam Robot Keeps An Eye On Privacy” →

Teach Your Air Compressor To Blow Eggs

June 7, 2021 by 16 Comments

As fun as it is to decorate Easter eggs, the road to a hollow hen’s egg is a gross and gooey avenue. Trust us, it sucks to blow out eggs, and it’s hard to get it right. Plus, you know, there’s that whole salmonella thing. [Phil] decided to speed things up this year by using an air compressor to do the dirty work.

Of course, one must approach this problem delicately because eggs are fragile. It would be nice to drill the egg instead of poking the end with a needle, but how are you gonna pull that off without breaking it? As it turns out, all you need is a bench vise, the right piece of PVC, a bit of rubber to keep the egg safe, and some hose clamps to keep the business part together.

[Phil] built a two-stage contraption that serves both purposes — the bottom cup safely cradles the egg for drilling, and the identical top cup connects to the air compressor, which blows the goo out of the bottom hole. [Phil] might have used negative pressure instead, but doesn’t have a vacuum pump or hose. Be sure to check out the brief demo video below.

Don’t want to mess around with real eggs? There are tons of ways to beautify fake eggs, but few of them are as cool as lasers.

Continue reading “Teach Your Air Compressor To Blow Eggs” →