Power Wheels Jeep Makes An Awesome R/C Car

January 11, 2012 by Mike Nathan 17 Comments

powerwheels-remote-control

[Will] from RevoltLab wrote in to share part one of a cool project he is working on right now, a remote-controlled mobile rocket launcher. Before you run off and call the Department of Homeland Security, he says that the launcher will be used for personal hobby rockets, which are typically considered mostly harmless.

The first part of the build is mostly concerned with obtaining a Power Wheels car and tweaking it to be driven remotely. After stripping out most of the odds and ends out of a Barbie Jeep he found via Craigslist, he added a small hobby servo under the dashboard to actuate the pedal. A larger (and much more expensive) servo was attached to the Jeep’s steering bar, allowing [Will] to easily turn the wheels with the flick of a switch.

With the mechanical bits out of the way, he installed an R/C receiver and took to the ~~streets~~ lawn with his creation.

The car seems to handle pretty well, and although the price of the components quickly start to add up, we’d be more than happy to spend that kind of cash for an R/C car that size!

Continue reading to watch a short video of the Jeep in action, and be sure to check Revolt Labs’ site often to follow [Will’s] progress.

Continue reading “Power Wheels Jeep Makes An Awesome R/C Car” →

A Bicycle Built For… Siamese Twins?

January 7, 2012 by Mike Szczys 24 Comments

This project really puts an end to arguing over who has to ride in the back of the tandem bicycle. We challenge you not to smile while viewing the maiden voyage that [Carlos] and his daughter take on this side-by-side bicycle. The video can be found after the break.

It certainly makes a bit more sense than an over-under tandem, and the fabrication process is really quite manageable. This requires alterations to the seat, handle bars, and pedals, but the majority of the bike (frame, gearing, fork, wheels) is unaltered.

The cranks have been replaced by a custom welded cam mechanism that reminds us of how the pedals on a paddle boat work. Both riders must pedal at the same time and rate. To give each a place to sit the seat post was converted into a T bar to host saddles to the right and left of the frame. Finally, the handle bars are the most complicated of all. Extra framing was welded onto both sides for the front tube to provide a place to mount two pair of handle bars. One of them is fixed in place, the other can be turned, using a lever mechanism to steer the front fork.

It looks a bit awkward to get started, but once both riders are up it seems quite stable.

Continue reading “A Bicycle Built For… Siamese Twins?” →

OK, You Might Not Be Paranoid – Perhaps That Priority Mail Box IS Spying On You

January 6, 2012 by Mike Nathan 15 Comments

rc-box-bot

[Thomas Renck] recently picked up a 1000mW wireless video transmitter that he ultimately planned to mount in an RC plane. Before he strapped it on a plane to potentially kiss it goodbye for good, he wanted to play with it a while to see what it was capable of.

After a friend helped him determine the camera’s maximum range (about 1900 feet on open ground), he thought it would be fun to strap it on his nitro R/C truck. That didn’t work out so well due to some vibration issues, so he constructed a makeshift R/C car from the shipping box the camera arrived in, along with some other odds and ends.

As you can see in the video below, the propeller-driven “Boxmobile” zips along quite nicely. The video feed from the camera is pretty impressive too, allowing him to easily guide the car while it’s well out of sight.

At nearly $350, the self-proclaimed “ghetto-bot” is certainly not cheap, though we hear body repairs are a piece of cake!

Continue reading “OK, You Might Not Be Paranoid – Perhaps That Priority Mail Box IS Spying On You” →

Self-balancing Unicycle Only For Those With Good Balance

December 27, 2011 by Mike Szczys 8 Comments

The only problem with this self-balancing unicycle is it’s inability to balance itself. You see, it automatically balances along the axis that is parallel to the line of travel. But since there’s only one wheel the rider is responsible for balancing perpendicular to travel. This is really not too much different from a bicycle; balancing while in motion is pretty simple. Only when you slow down or stop are you in trouble.

[Stephen Boyer] built the vehicle and uses it for most of his travel around the MIT campus. It carries a pair of 12V batteries that pack enough punch to travel five miles between charges. A 5DOF board senses motion and orientation, with an ATmega328 microcontroller calculating the corrections necessary to keep the rider upright.

The demo video after the break never really gives you good look at the thing, but it’s enough to prove that it does indeed work very well. We’re also glad to see that [Stephen] is using a kill-switch while riding.

If you’re aching for more electric unicycle video check out this other project too. Continue reading “Self-balancing Unicycle Only For Those With Good Balance” →

SMS Remote Start Gives New Life To Your Old Smartphone

December 18, 2011 by Mike Nathan 50 Comments

iphone-sms-remote-start

Hack a Day alum [Will O’Brien] recently upgraded his phone, and was trying to find a use for his old one. He always wanted a remote starter for his Subaru Outback, but wasn’t interested in paying for an off the shelf kit. Since he had this old smartphone kicking around, he thought that it would be the perfect starting point for an SMS-triggered remote start system.

He started off by jailbreaking his phone, which allows him to run some Perl scripts that are used to listen for incoming texts. Using a PodBreakout mini from Sparkfun he connected the phone to an Arduino, which is responsible for triggering the car’s ignition. Now, a simple text message containing the start command and a password can start his car from a anywhere in the world.

While [Will] is quite happy with his setup he already has improvements in mind, including a way for the Arduino to send a message back to him via SMS confirming that the car has been successfully started. He’s thinking about putting together a kit for others looking to add the same functionality to their own car, so be sure to check his site periodically for project updates.

Hackin’ The Junkyard: Electric Scrap Bike Projects

December 17, 2011 by Jesse Congdon 6 Comments

[Brad Graham] wrote in to let us know about his electric bike data dump over at atomiczombie.com, written just for us! Last we heard from [Brad] he was building some serious robots and freakishly tall tallbikes but since the weather has turned for the chilly its time to focus on indoor projects. Using a combination of robot parts, electrical conduit, and OEM bikes for the frames [Brad] takes us through several of his builds and all the various complications trying to drive the (often very powerful) electric motors. The builds range from scrapping motors and controllers to full blown drop in hub motor systems that can combine human and electric power. There is even an electric pusher cargo cart designed for a cooler, because beers are not going to haul themselves around.

Don’t forget to check out the AtomicZombie website for a ton of useful tips to chopping up bikes for your own mutant transpiration projects, we know we will. Thanks [Brad]!

Dash-mounted Nook Color Is A Perfect Head Unit Replacement

December 5, 2011 by Mike Nathan 30 Comments

jeep-nook-mount

XDA forum member [craigbru] wanted to beef up the audio setup in his Jeep, and thought that his Nook Color would make a suitable replacement. Since he jailbroke the e-reader, the head unit upgrade lets him do just about anything you can imagine, all from the comfort of the driver’s seat.

Seeing that he would continue to go off-road with the Jeep, he wanted to construct a mounting solution that was convenient and sturdy – something we think he did very well.

The dock was constructed using a Quadratec iVault stereo mount, along with a plastic tablet mount he had on hand. Because convenience was a primary goal, he put together a quick release charging solution as well as a simple audio interface using a set of touch contacts. This allows him to connect and detach the tablet from the Jeep without having to fuss with a bunch of cables each time. He also added an audio equalizer along with a Bluetooth OBDII interface to the setup, allowing him to tweak his tunes and monitor his engine with ease.

We think it’s a great-looking setup, and we’d be lying if we said we didn’t want one as well.

[Thanks, MS3FGX]