Keep Tabs On Your Car Without OBD-II

March 16, 2010 by Jakob Griffith 37 Comments

[Steve] let us know about his MultiDisplay car monitoring system. Unlike traditional systems that rely on interfacing with the OBD-II protocol and existing car computer, the MultiDisplay uses an Arduino and custom shield with a combination of sensors; including temperatures, pressures, throttle, Boost, and etc. The data collected can then be displayed on a 20×4 LCD or streamed to a PC with visualization and event recording.

It’s nice to see half a years worth of work finally be complete and presented in such a clean and professional manner, keep up the good work [Steve]

Coffee Powered Car-puccino

March 10, 2010 by Jakob Griffith 44 Comments

We can only imagine how amazing this coffee burning car smells at it speeds down the highway at a maximum of 60mph. Don’t jump out of your seat so quick to get your own, while the idea sounds fantastic, the mileage will bring you back to earth rather quick. At 3 miles per kilo of coffee, it can turn that £36 210 mile trip into one between £910 and £1,820 with a stop to re-bean-fill every half hour!

Still, the Car-puccino is an amazing conversion, and we’re getting closer and closer to Back to the Future’s Mr. Fusion

[Thanks Tim]

Trick Your Ride: Tank Conversion

February 14, 2010 by Mike Szczys 38 Comments

If wheels aren’t your thing you should really consider this tank-tread retrofit. It comes with two ramps so that you can drive your car up onto the tread platform. At first we thought this worked by chaining the vehicle’s frame to the tread frame and transferring power through a tread-mill interface. That’s not the case, it seems the transmission needs to be disconnected from the wheels and joined with the tank mechanics. Don’t miss the video antics after the break.

Continue reading “Trick Your Ride: Tank Conversion” →

Start The Car With A Wave Of Your Hand

January 14, 2010 by Mike Szczys 74 Comments

[Jair2K4] likes his RFID almost as much as he likes his chaw. Ever since his car was stolen he’s had to start it using a screwdriver. Obviously this is not a good way to leave things so he decided to convert his starter to read an RFID tag. He installed an RFID transponder he picked up on eBay, wiring it to the ignition switch. He’s removed the clutch-check sensor and wired a rocker switch to enable the RFID reader. We presume the rocker switch will eventually be used to shut the car off as well.

While most would have purchased a key-chain RFID tag, [Jair2k4] went far beyond that and had the tag implanted in his hand. This is an honor usually reserved for pets and until he adds RFID functionality to the door locks maybe a key fob would have been a better answer. But, to each his own. See his short demonstration video after the break.

Continue reading “Start The Car With A Wave Of Your Hand” →

Spreading Christmas Cheer W/ Auto Parts

December 24, 2009 by Jake W 5 Comments

The folks over at [Soup], a British marketing agency, thought up this cool project. It’s a set of handbells hooked up to an Arduino, actuated by central locking motors found in car doors. By the look of some pictures, there was also a Lego version. Songs written by users (through the online interface) are placed in the que of a server. Once it’s time for the song to be played, serproxy sends the Arduino an appropriate set of commands for ringing the bells in sequence. All of this happens in the [Soup] office while it is streaming live through a webcam.

We think that this is definitely a great way to use surplus auto parts. After all, not everyone can build helicopters.

It seems as though the bells are down for the moment, or the employees got a bit annoyed at hearing them constantly ring.

Automotive Current Monitor

December 16, 2009 by Mike Szczys 27 Comments

If you’ve ever had a car with an electrical system problem you know how hard it can be to pin-point the source of your woes. Here’s a hackery solution that uses a diy PCB to monitor the current being drawn off of the alternator.The sensing is provided by an Allegro ACS758 integrated circuit. This chip measures current up to 150A and outputs an analog signal that can be measured by a microcontroller. In this case an AVR ATmega8 measures the signal and spits the info back to a PC via the serial port. This data can be graphed to help locate when too much current is being drawn for the battery to remain charged.

Check out that CNC milled PCB, what a beauty!

[Thanks Joshua via Elektronika]

(Remote Controlled Robot) Car Vs (solar Charged) Tank

December 5, 2009 by Jakob Griffith 8 Comments

[youtube http://www.youtube.com/watch?v=WKFECpQ8asI%5D

[Matthias] sent in his team’s iPhone Robot (CAR) project in response to yesterday’s iPhone controlled solar charged tank. Unlike the tank, the iPhone car is controlled via Bluetooth BTnode and BTstack, and also isn’t solar-powered. However, both projects utilize iPhones and readily available components. We particularly liked how it not only used a multi-touch input, but also the accelerometer within the iPhone. It seems some competition is stirring, lets see who wins out.