Shredding To Street Fighter

May 19, 2010 by Mike Szczys 14 Comments

Strumming to punch and changing frets to move, [Alan Chatham] plays Street Fighter using his guitar. It’s been modified to use OpenChord, an open source guitar controller package he developed. This was originally meant to be used with Guitar Hero and the like but as he mentions in the video after the break, it is open source so you can do whatever you want with it. In this case, he’s patched into a PS3, showing yet another way to use your own hardware on that console. Unlike alternative guitar-like interfaces you won’t have to relearn how to play. You just need to adapt your favorite songs to fall in line with butt-kicking controller combos. For the adventurous you can build your own but [Alan’s] got kits available too. Continue reading “Shredding To Street Fighter” →

Part Arcade, Part Guitar

April 28, 2010 by Jakob Griffith 11 Comments

Finally a guitar that all of the arcade gaming geeks can jam with. [Mike Davenport] sent us his 8bit arcade based guitar for his senior project. Details are a little sparse if you intend to build you own at the moment, but he does mention the basics: such as it uses an FPGA for logic and function, the strings and joystick modify pitch, it has selectable waves and other parameters, and even includes save banks! Check out a video of him playing street fighter rocking out after the break. Continue reading “Part Arcade, Part Guitar” →

The Wii Golf Glove

April 27, 2010 by Mike Szczys 14 Comments

[Shu Uesugi] is filling a controller void that Nintendo has yet to address. He picked up a golf glove from Target and incorporated it into an air guitar interface. Give the video after the break a chance, you’ll start to see the full potential of this build about three and a half minutes into it. Using an Arduino, a Wii nun-chuck, and his flex-senor adorned glove [Shu] can play individual notes, strum cords, and play around with sound effects such as distortion.

So come on Nintendo, the Power Glove was one of your greatest ideas, where’s our 21st century version? I guess we’ll just have to make our own like [Shu] did. Perhaps we’ll even build our flex sensors from scratch.

Continue reading “The Wii Golf Glove” →

Automated Guitar Pickup Winding

April 20, 2010 by Mike Szczys 21 Comments

[Robert Pickering] shares his automated guitar pickup winder with us. He built it for his senior project at Old Dominion University. Two stepper motors are used to wind the magnet wire around the pickup hardware. The unit is PIC based and about six minutes into the video (embedded after the break) you can see that he used wire wrapping for this build. Curious, one of the comments on our latest Hackaday Links mentioned that wire wrapping was rarely used anymore, but here it is anyway.

We especially like the limiting switches he’s using on the traverse mechanism. There are momentary push buttons on either side of a carriage which are depressed when a drywall screw in the sides of that carriage hits them. This makes for very easy calibration because the screw can be raised or lowered with just a bit of screwdriver work. Well built and documented, we’re sure he’ll get some high marks on this one. Continue reading “Automated Guitar Pickup Winding” →

Guitar Echo Pedal Built With Mbed

March 28, 2010 by Mike Szczys 14 Comments

[Vsergeev] built an echo pedal for a guitar or with other audio manipulation applications. He used an mbed microcontroller for the project. You may remember Hackaday writer [Phil] labeling the mbed an ‘Arduino on steroids’, and it certainly handles this audio processing quite well. We’ve included a clip of the echo effect after the break. During the design process, [Vsergeev] used LTspice to simulate the analog circuitry and make things right before committing to the physical circuits.

Continue reading “Guitar Echo Pedal Built With Mbed” →

Hey Man, SSH To My Guitar And Setup The Multitouch

January 20, 2010 by Mike Szczys 37 Comments

The Misa Digital Guitar is a digital music controller like we haven’t seen before. The body, machined out of ABS, looks like a guitar. The player puts theirs hands in the same places you would on a guitar but the lack of strings make it something different.

The left had manipulates inputs in the form of 144 sensors, six in each of the twenty-four fret positions. The right hand doesn’t strum, but uses a multitouch screen to control the inputs. The UI looks solid, something you’ll have to see for yourself after the break. Tieing this all together is an AMD Geode processor running Gentoo Linux. That means this is open source and begging you to make it do your bidding.

Continue reading “Hey Man, SSH To My Guitar And Setup The Multitouch” →

Electronic Guitar Pick Tunes The Strings For You

November 23, 2009 by Mike Szczys 25 Comments

The Stimmmopped is an electronic guitar tuner made to be used as a guitar pick. This uses two LEDs synchronized to blink at the exact frequency of the string you are tuning. Pluck the string with the corner of the PCB and then shine the light on the string you are tuning. As the vibrating string moves back and forth it will only pick up the spot of light when the frequency matches that of the blinking LED. Once in tune, both red lights will appear to be constantly illuminated and immobile on the string.

An Atmel ATmega8 is used to control the device, interfacing with two buttons and a seven-segment display to choose the pitch currently being tuned. Gibson has a robotic guitar that features an auto-tuning mode, but if you don’t want to shell that much this low cost and simple build is for you.

[Thanks Sören]