LED Ring Light

November 16, 2009 by Mike Szczys 30 Comments

diy-ring-light

[Jani] built his own photography ring light based on automotive LED rings. The rings he used are meant to encircle headlights on a car and are available at a low cost. The assembly is built around a filter that attaches to his camera lens. Two rings of LEDs are then glued to a case made from the plastic of a CD-R container. To diffuse the light, he sanded both sides of the clear plastic housing to make it translucent.

LED rings operate on DC power and unlike a ring flash, they provide constant light to help set up your shot. His finished project is well-built and should come in between $10-20.

Bulbdial Redux

November 15, 2009 by Jakob Griffith 9 Comments

[Taufeeq] sent in his “Circle of Light” bulbdial clock. You may remember when we showed you Evil Mad Scientist’s version a while back, and [Taufeeq] did use it as a base but he’s added some of his own little touches. Some of the changes include using a PIC with an RTC chip instead of AVR, which allowed him to shrink the board down small enough to fit behind the clock face, rather than on front. He’s even zipped everything up conveniently to help you build your own.

Raid The Dollar Store For An Illuminated Umbrella

November 12, 2009 by Mike Szczys 23 Comments

diy-illuminated-umbrella

Here’s a quick and easy illuminated umbrella that [Mikeasaurus] built. How’s this for economical? He found an umbrella that someone left on the bus, and used an LED flashlight and clear poncho from the dollar store for the rest of the parts.

The scavenged LED circuit board is the perfect diameter to fit inside the handle of his umbrella. He removed the middle LED and drilled a hole in the board for the shaft to pass through. Although not well detailed, we gather he managed to shoehorn two CR2032 3v batteries underneath the PCB to power the device. The poncho is wrapped around the shaft to diffuse the light. This is a clever solution as the flexible plastic still allows the telescoping shaft to collapse down to its most compact size.

[Mikasaurus’] umbrella doesn’t make noise or emulate the weather but it is a clever idea. The low difficulty level and availability of parts makes this a great project to do with the young ones who don’t get included in your more intricate hacks.

Voice Controlled LED Sign

November 10, 2009 by Jakob Griffith 8 Comments

[youtube http://www.youtube.com/watch?v=KiYYJ5WMG6I&feature=player_embedded%5D

120 LEDs and NerdKit, check. Python and appropriate Google Voice module, check. Blend on high for 2 minutes, bake for an hour at 400 degrees Fahrenheit. Your soufflé is done, whoops, we mean your voice controlled LED sign is done. Leave a voicemail on Davis’ Google Voice account that starts with “message” and it will be displayed for all to read within a matter of minutes. We think: make it bigger and add a security code before you can leave a message, and you’ve got the perfect recipe for some over sized message fun.

[via Make]

Roundup: Simple Hacks

November 9, 2009 by Mike Szczys 15 Comments

simple-hack-110909

Here’s a collection of simple hacks you can do in between larger projects. After the break we’ll look at converting an iPod from hard drive storage to Compact Flash, build an LED desk lamp using LEGO and USB power for charging, and use an Arduino shield to add network control at the touch of a button.

Continue reading “Roundup: Simple Hacks” →

Electronic Jewelry

November 5, 2009 by Caleb Kraft 19 Comments

4061292835_d595b855d1

[Ellindsey000] posted this neat little pendant to his flickr stream. We like the way it looks, and the fact that it is a functional circuit. The schematic is even pretty neat. We would maybe wear this, as a belt buckle or something. When we looked at this though, we thought it looked really familiar. Yeah, it kind of looks like the arc reactor from Iron Man, but what we thought of was this cool looking walker. As you could probably already tell, it’s the same person. Great job again [Ellindsey000], and thanks for posting the schemtaic.

Apple Remote Arduino Shield

November 3, 2009 by Mike Szczys 27 Comments

arduino-apple-remote-shield

[Computergeek] made an Arduino Shield in order to use it as an Apple remote. We like the construction technique that he used; taking perf-board and soldering the circuit and using stripped wire to interface with the pin sockets on the Arduino. He’s written the code needed to function as an Apple Remote but this shield has a lot more potential. This is an excellent opportunity to delve into the different IR protocols out there and create a universal remote for all of your random devices. We’d also want to give it a try as a TV-B-Gone.

The parts are easy to find or salvage without putting in an order. We’re not certain about his design, he should probably have invited a resistor to the party the two IR LEDs are having.