Mass Storage Business Card

May 25, 2010 by Mike Szczys 28 Comments

Just snap off the corners and this business card can be used as a mass storage device. Well sort of. The tab left over has four traces on the back to make it USB compatible. The PIC 24FJ64GB002 microcontroller on the card registers as a storage device and launches [Ramiro’s] resume and a cover letter loaded as an HTML file. He’s made it as useful as possible by including access to the SPI and I2C bus connections but he’s also included some firmware to act as a data logger or an oscilloscope. At about 5 euros a piece you won’t be distributing these willy-nilly but it’s not too much more than handing out breakout boards with your name all over them.

Z80 Emulated On PIC Hardware

May 22, 2010 by Mike Szczys 18 Comments

[Jaromir Sukuba] built a very portable, low power consumption Z80 emulator using a PIC microcontroller. Looking through his build photos we love the clean and resilient construction which includes a breakout board for the PIC 32MX795F512H that interfaces with the main board via pin headers and sockets. He’s using a home-built keyboard and a 4×40 character display but there is also the option to communicate with the device over an RS232 connection. Oh, and yes it plays Zork, which seems to be the benchmark whether you are emulating a Z80 with AVR hardware, or if you built one from transistor-transistor logic.

A Black Box Mystery

May 15, 2010 by James Munns 171 Comments

One of the members of the SomethingAwful forum recently found a black project box on the street (as seen above), with no idea what the thing did. After (hopefully) making sure there were no explosives, [noapparentfunction] posted a picture online to see if someone could figure it out. According to them, this is what the chips are labelled as:

Center black IC: MICREL Y22758C; 0417
Long white DIP switch IC: CTS 206-12; T438
Small black microcontroller on right: 12C508A; 04/P1V6; 0437. Has a tiny “M-inside circle” logo.

From our experience, we recognized the PIC on the board, but without some more photos, it makes this mystery a little more interesting.

Right now their best guess is a garage door opener of some kind because of the 12 DIP switch part. Any HAD readers willing to investigate and weigh in? The game is afoot!

[thanks to Dave D. who sent this in]

Vehicle Information Display Hacks

May 5, 2010 by Mike Szczys 20 Comments

We’ve had a few folks send us info about their vehicle display hacks after seeing [Will O’Brien’s] motorcycle computer a few days ago.

On the left we have a display for an electric vehicle. [S1axter] is using a 4.3″ TFT screen to display charge information for each battery cell in the car. An ATmega88 collects the data and sends it to a breakout board with an LCD controller on it.

To the right is a display from a Formula Student project. a Matrix Orbital GLK19264-7T-1U LCD display provides a lot of real estate for displaying data. Right now [Alan] is still in the early prototyping stages, but the video after the break demonstrates the RPM readout using a function generator. It’s not shown in the video, but he tells us that he’s since tried it out with the engine and has a PIC 16f877 reading temperate data from the electronic control transmission sensors in addition to the RPM data.

Correction: Thanks to [j] for correcting our mistake. This is a Formula Student car.

Continue reading “Vehicle Information Display Hacks” →

EMG Controlled Prosthesis

May 4, 2010 by Mike Szczys 7 Comments

This prosthetic arm is the result of a student project. [Amnon Demri] and his classmates built it with below-the-elbow amputees in mind. It uses electromyography to actuate the fingers and wrist. Four stick-on sensors are placed around the elbow to sense electrical activity there. These signals are interpreted by a PIC 16f877a microcontroller which then controls the servo motors to operate the prosthetic limb. This sounds like a very economical solution and as you can see in the videos after the break, it works fairly well.

Continue reading “EMG Controlled Prosthesis” →

Altair 8800 Pc Case Can Emulate The Original Hardware

April 26, 2010 by Mike Szczys 9 Comments

The Altair computer is commonly considered the genesis of personal computing and for that reason it has a special place in the hearts of many. [Bob Alexander] brings back the glory of the Altair 8800 plus a lot of added computing power. This PC case houses a Core i5 system but the front panel isn’t just for looks. He designed a PCB and resized an image of the original Altair front panel to end up with a fully functioning control interface. In the demo after the break you’ll see that the buttons can be used for power and reset and the LEDs can show random Altair-like patterns. But the interface can also works in conjunction with an Altair emulator to perfectly mimic the original Altair experience. This is a great way to sidestep the buyer’s remorse one might experience with a standalone kit.

Continue reading “Altair 8800 Pc Case Can Emulate The Original Hardware” →

Update: IR Controlled Lighting

April 26, 2010 by Mike Szczys 11 Comments

[Muris] is back with another infrared controlled lighting hack. When we checked in with him last year he was showing off an IR controlled dimmer module. Now he’s back with this device that is CFL friendly. Because standard CFL bulbs are not dimmer compatible he’s adapted the project away from dimming and toward switching. The new design still uses an infrared remote but now it can turn two devices on and off again or toggle between them. Our favorite part of the build is that the PIC based device can learn the codes of whichever remote you choose, rather than having to rely on one specific type of remote.