Hackaday Prize Entry: High End Preamps

September 16, 2016 by Brian Benchoff 37 Comments

While compact disks are seeing an uptick in popularity thanks to a convenient format that offers a lossless high-quality 44.1 KHz sample rate with 16-bit depth, some people are still riding the vinyl bandwagon of 2010. With that comes a need for the best hardware, and that means expensive cartridges and preamps designed by someone who knows what they’re doing.

For this year’s Hackaday Prize, [skrodahl] is building a really, really good preamplifier for moving coil turntable cartridges. It’s already built, it’s already tested, and the results are good: it produces between 36 and 46dB of gain, -110dB of dynamic range, and a signal to noise ratio of 79.46 relative to a 5mV input. That puts this preamplifier into the same territory as preamps sold with serial numbers, crystal lattices, and other audiophile nonsense.

The quality of this preamp comes from the design, and like any good open hardware project, [skrodahl] has made the schematic, PCB, and layout of this preamp completely open. It’s a great preamp, and a great entry for the Hackaday Prize.

High Performance Crystal Radio

September 16, 2016 by Al Williams 14 Comments

When you think of a crystal radio, you probably think of something simple maybe built out of household scraps. Not if you are [Chris Wendling]. He recently posted a video (see below) of his high-performance crystal set. He doesn’t take any shortcuts: he has several hundred feet of antenna wire, and uses a cold-water pipe ground system. With no amplifier, a strong signal input is crucial.

The radio has four subsystems: an antenna tuner, a bandpass filter, a detector, and a powered audio output system. He also has a truly enormous system of speakers on the ceiling–this isn’t the crystal radio you made in the boy scouts.

Continue reading “High Performance Crystal Radio” →

Smartphone TV Remote Courtesy Of Homekit And ESP8266

September 16, 2016 by Mike Szczys 18 Comments

Good grief, this smartphone-to-TV remote really drives home how simple hardware projects have become in the last decade. We’re talking about a voltage regulator, IR LED, and ESP8266 to add TV control on your home network. The hardware part of the hack is a homemade two sided board that mates an ESP with a micro-USB port, a voltage regulator to step down fom 5 to 3.3 v, and an IR LED for transmitting TV codes.

Let’s sit back and recount our good fortunes that make this possible. USB is a standard and now is found on the back of most televisions — power source solved. Cheap WiFi-enabled microcontroller — check. Ubiquitous smartphones and established protocols to communicate with other devices on the network — absolutely. It’s an incredible time to be a hacker.

Television infrared remote codes are fairly well documented and easy to sniff using tools like Arduino — in fact the ESP IR firmware for this is built on [Ken Shirriff’s] Arduino IR library. The rest of the sketch makes it a barebones device on the LAN, waiting for a connection that sends “tvon” or “tvoff”. In this case it’s a Raspberry Pi acting as the Homekit server, but any number of protocols could be used for the same (MQTT anyone?).

Continue reading “Smartphone TV Remote Courtesy Of Homekit And ESP8266” →

Waste Shark Aims To Clean Our Harbours And Oceans

September 16, 2016 by James Hobson 43 Comments

Drones are adding functionality to our everyday lives, and automation is here to help humanity whether we’re ready for it or not. In a clever combination of the two, [Richard Hardiman] of RanMarine has developed small drone-boats that scoop up garbage from the ocean — he calls them ‘Waste Sharks.’

The two models — slim and fatboy — aim to collect up to 1,100 pounds of garbage apiece in the ‘mouths’ just below the water’s surface. The Waste Sharks are still restricted to remote control and are only autonomous when traveling between waypoints, but one can see how this technology could evolve into the “Wall-E of water.”

Continue reading “Waste Shark Aims To Clean Our Harbours And Oceans” →

Retrotechtacular: Railroads In The Jet Age

September 16, 2016 by Jenny List 29 Comments

The front of the Soviet jet train on a monument in Tver, Russia. By Eskimozzz [PD], via Wikimedia Commons.

It started with one of those odd links that pop up from time to time on Hacker News: “The strange and now sadly abandoned Soviet Jet Train from the 1970s“. Pictures of a dilapidated railcar with a pair of jet engines in nacelles above its cab, forlorn in a rusty siding in the Russian winter. Reading a little further on the subject revealed a forgotten facet of the rivalry between Russians and Americans at the height of the Cold War, and became an engrossing trawl through Wikipedia entries, rail enthusiast websites, and YouTube videos.

Continue reading “Retrotechtacular: Railroads In The Jet Age” →

A Better Way To Measure Your Impact On The World

September 16, 2016 by Mike Szczys 36 Comments

Close your eyes and think of an electric wheelchair. What do you see? Is it sleek, futuristic, and elegant… worthy of the moniker: iChair? No, no it is not. It’s a boxy tank-like thing with grey knobbed wheels that is powered with lead-acid batteries. Why is that?

Obviously there are alternatives. Just yesterday I came across UPnRIDE (that name is sore on the eyes but speak it aloud and you’ll get it). It’s an electric wheelchair that converts into a standing position. And it looks comparatively sleek and modern. And it’s not the first time I’ve seen the idea before. One of my favorite articles over the years is still our coverage of Tek RMD, a similar standing robotic wheelchair design. So why is it I don’t see these in the wild? Why is it I only remember seeing the concept twice in four years?

Continue reading “A Better Way To Measure Your Impact On The World” →

RC Car Piloting With The Blast Shield Down

September 16, 2016 by Jenny List 26 Comments

Many of us have had a radio controlled car at some time in our youth, though it’s probable that none all of us entirely mastered it. There are memories of spectacular crashes, and if we were really unlucky, further boosts to Mr. Tamiya’s bank balance as fresh parts had to be fitted.

[Paul Yan] was watching his young son with a radio controlled toy, and was struck by how the two-joystick control layout is not necessarily as intuitive as it could be. By contrast when faced with a console game with first-person view and a steering wheel the boy had no problem dropping straight into play. This observation led him to investigate bringing a console steering wheel to an RC car, and the result is a rather impressive FPV immersive driving experience.

Paul's FPV car, explained. — Paul’s FPV car, explained.

His build took a PS2 steering wheel peripheral with pedals and mated it to an Arduino Uno via a PS2 shield. The Uno talks to a Nordic NRF24L01 RF module, which communicates with another NRF24L01 on the car. This in turn talks to a car-mounted Arduino Micro, which controls the car servos and speed controller.

FPV video is provided by a miniature camera and transmitter from the world of multirotor flying which is mounted on the car and transmits its pictures over 5GHz to a set of monitor goggles. Sadly he does not appear to have posted any of the software involved, though we doubt there is anything too challenging should you wish to try it for yourselves.

The video below shows the car in action, complete with an over-enthusiastic acceleration and crash from his young son. He tells us it’s a similar experience to playing a racing kart game in the real world, and having seen the video we wish we could have a go.

Continue reading “RC Car Piloting With The Blast Shield Down” →