Two Generations Of Ocean-going ROV

[Eirik] wants to help inspire others to take on big projects to he sent in a link to his ROV project. He started it about one year ago and the image above shows the first generation. After the break you can see the video that the ROV captured during a couple of it’s initial voyages. They’re pretty clear and right off the bat you’ll see the little guy following a jellyfish. Like a lot of homebrew ROV’s [Eirik] is still searching for the right way to pass wires through the housing without leaks. He does okay so far, and has designed a nice cable spool for the topside tether, but some water does get in. He’s almost finished the second generation which re-designs the camera mount to aim downward so that what’s in frame is more interesting.

Continue reading “Two Generations Of Ocean-going ROV” →

Converting 8mm Film To Digital

Many of us have these old 8mm family videos lying around and many of us have lamented at the perspective cost to get them converted to digital.  [Paul] came up with a pretty slick way of digitizing them himself. He cracked open an 8mm projector and replaced the drive motor with one he could run at a much slower speed, allowing him to be able to capture each frame individually with his digital camera. He’s rigged his remote shutter control to the shutter of the projector so that it would be perfectly synchronized. There’s a video of it in action on the flickr page, and a video of the full 16,000 frame clip after digitization here.

[via Make]

R2D2 Wannabe Lacks Lightsaber Launcher, Autonomy

Is this what the lovable Star Wars droid would look like without its protective skin? This R2D2 inspired robot is another Olin College of Engineering (where that CNC cake decorator came from) build developed by [Nathaniel Ting] and his classmates. Alas, it lacks autonomy, relying on an operator for guidance. But we enjoy it for the build quality. Two motorcycle batteries supply DC motors on the two rear legs of the trike. It can be driven with a wireless Xbox controller or through a Python interface that also randomly plays droid audio clips from the movie. That’s a tilting projector on top, which would be used to show Princess Leia’s pleas for assistance. That is, after the operator plugs in an extension cord to power it up. Oh well, it’s still a lot of fun to watch. See for yourself after the break.

Continue reading “R2D2 Wannabe Lacks Lightsaber Launcher, Autonomy” →

ArduSpider Entertains Children And Exercises Pets

There are so many good things about [Jose Julio’s] robotic spider. It’s design is dainty yet robust, and the behaviors encoded in the firmware are nothing short of spectacular.

The body is built from a piece of balsa wood in between sheets of carbon fiber. The legs are carbon rods, using two servo motors for left and right leg movement, and a third servo which can move the intermediary legs like the roll axis of a plane. An IR sensor rides on the front for obstacle avoidance, with system control courtesy of an Arduino. For more hardware info check out his build log.

Don’t miss the video after the break. You’ll see that the little bot can be manually controlled, or allowed to roam free. As we said before, the behavior is fantastic. Not only has [Jose] programmed interesting characteristics like the spider getting tired and sitting down for a while, but when it is awakened it leaps into the air. The movements are fun to watch for human and feline alike; if only your house cat could be so lucky.

Continue reading “ArduSpider Entertains Children And Exercises Pets” →

Atomic Pinball Clock

[Mark Gibson] sent us a load of details on his build, a WWVB atomic clock using a pinball machine marquee (PDF). This is the upright portion of an old machine that used electromechanical displays instead of digital electronics. It’s big, noisy, and seeing it running might make you a bit giddy. Luckily he included video that shows it working on both the outside and the inside.

It took a bit of probing to discover the connections for relays that control the display. From there he used optoisolation to drive them with an Arduino. With this hurdle behind him, [Mark] set out to add atomic clock accuracy. He picked up a WWVB module and added it to the mix.

Check out his build log in PDF form linked above. He went out of his way to explain how the original parts work, and the processes he used during prototyping. For more of those juicy details we’ve added a photo gallery and his video after the break.

Didn’t get enough pinball goodness from this project? Check out the this digital gas plasma display pulled and reused from a much more modern pinball machine. Oh, and there’s always Bill Paxton Pinball.

Continue reading “Atomic Pinball Clock” →

Theory Behind Evanescent Wave Coupling, Aka Wireless Power

[Alan Yates] is building a persistence of vision display and needs a way to transfer power from the stationary base to the spinning circuitry. He’s decided to go with wireless energy transfer and he’s sharing all of his research and experiment data from the development process. It comes in two forms, the written version we just linked to, and a 37 minute video which is embedded after the break. If you liked some of the inductive energy transmission devices we’ve featured in the past, [Alan’s] video will fill you in on the why’s and how’s by using a combination of illustrative schematic examples and measurements on test coils that he built.

Continue reading “Theory Behind Evanescent Wave Coupling, Aka Wireless Power” →

Macintosh Plus DJ Helmet With An IPad

Elaborate helmets are not a new concept, with many famous artists such as Daft Punk and Deadmau5 using them for stage shows. For a sculpture class, [Terrence] fashioned his own out of the body of a Macintosh Plus and an iPad conveniently sourced from eBay. After gutting the insides, the Mac Plus was fitted with parts from a helmet both for comfort as well as for keeping the whole setup head mounted. For additional eye candy, an LED visualizer was affixed below the iPad display. The rig is remotely controlled by a bluetooth keyboard, just for good measure. We think this setup easily stands up to other Daft Punk-esque style head mounts.

Be sure not to miss the video of the helmet featuring DJ Chameleon (a friend of [Terrence]) in action, as well as a number of other photos.

[Edit: Thanks to everyone who caught the Mac Plus/Pro error!]