Retro TO-3 Switching Voltage Regulator

Restoring old gear often means replacing unavailable parts with modern equivalents. [Alex Eisenhut] needed to replace some old TO-3 voltage regulators and decided to make an authentic-looking switching power supply replacement. These three pin metal cans were very common, especially the LM340 5V regulator which was, of course, a linear regulator. Today, you are more likely to see a 7805 in a TO-220 case or something surface mount for a comparable linear regulator.

As you might expect, the board uses surface mount components. [Alex] used Mill Max machine pins to match the original regulator footprint and calls the regulator Ton3y. He plans to cover it up with a 3D printed lid, but it seems a shame to hide the fine PCB work.

In the pictures, you can see that the machine pins are a tight fit. [Alex] used a hammer to lightly tap them into place. Of course, the original TO-3 regulators were linear and would generate a lot of heat. The Ton3y, as you’d expect from a switching power supply, runs cool (according to the scientific measurement made with [Alex]’s pinky finger) and surely has a wider input voltage range and more output current capacity.

We’ve seen replacement switching regulators before, but this one is really a work of art.

[Federico Musto] Of Arduino SRL Discusses Arduino Legal Situation

Recently we had the opportunity to sit down and interview Arduino SRL’s CEO, [Federico Musto], over a nice dinner. His company is one half of the Arduino vs Arduino debacle which has pitted Arduino.cc against Arduino.org in a battle over the trademark on “Arduino”.

Given the tremendous amount of press coverage of [Massimo Banzi] and the Arduino LLC side of the story (Arduino.cc), we were very interested in hearing how the whole situation looks where [Frederico Musto] sit (Arduino.org). In the end, we came away with what we feel is a more balanced and complete picture of the situation, as well as interesting news about future products from the Arduino SRL camp. [Musto’s] take on the legal proceedings, both past and present, is nothing short of fascinating.

Continue reading “[Federico Musto] Of Arduino SRL Discusses Arduino Legal Situation” →

No, Mounting A Gun To A Quadcopter (Probably) Isn’t Illegal

Earlier this month, [Austin Haghwout] posted a video on YouTube of a remote controlled quadcopter armed with a semiautomatic handgun. While there are no details of this build, it’s safe to say any reasonably sized quadcopter could be armed in such a manner; just strap a pistol to the frame, add a servo, and connect the servo to the RC receiver. We don’t think this is the first time it’s been done, but has garnered the most attention.

There is nothing novel about mounting a handgun to a quadcopter. Anyone with any experience with RC flying could replicate this build, and the only interesting part of watching a video of a quad firing a gun is seeing how the flight controller reacts to the recoil. However, in the pursuit of the exploitation of a fear of technology, this video has gone viral.

The Verge calls it, ‘totally illegal’, while The Christian Science Monitor asks how it is legal. Wired posits it is, ‘most likely illegal,’ while CNET suggests, ‘surely this isn’t legal.’ In a rare break from reality, YouTube commentors have demonstrated a larger vocabulary than normal, calling the build, ‘felonious.’

With so many calling this build illegal, there should be someone who could point out the laws or regulation [Austin Haghwout] is violating. This information is surprisingly absent. In a Newsweek post, a representative from the Bureau of Alcohol, Tobacco, Firearms, and Explosives is quoted as saying:

“ATF has reviewed the video with local law enforcement and other federal agencies. It does not appear that the device violates any existing firearms regulations…”

The Associated Press reports no state laws were broken by [Austin]. With the BAFTE and Connecticut State Police both signing off on this build, the issue of jurisdiction becomes more pronounced. How, exactly, is a gun mounted on a quad illegal?

The answer, as with all things involving quadcopters, comes from the FAA. We could find no regulations explicitly banning handguns on remote controlled quadcopters, but of all stories and posts on [Austin]’s handiwork, this is the closest anyone has come to providing the framework for calling this build illegal:

No pilot in command of a civil aircraft may allow any object to be dropped from that aircraft in flight that creates a hazard to persons or property. However, this section does not prohibit the dropping of any object if reasonable precautions are taken to avoid injury or damage to persons or property.

-FAR Part 91 Sec. 91.15

That’s it. The closest anyone has come to providing a reason why a semiauto quadcopter is illegal: because the cartridge (and bullet), are ‘dropped’ from a quad. The Feds charging [Austin] with “dropping” a bullet from a quadcopter is like taking down [Al Capone] for Income Tax Evasion. The difference being that [Al] was a notorious criminal who had obviously harmed a large swath of people and [Austin] doesn’t seem to be harming anyone.

Although [Austin]’s video of a gun toting quad is only fourteen seconds long, a few reasonable assumptions can be made about his small experiment in flying firepower. The video shows the quad hovering a few feet above the ground. This is surely allowed by the recently published safety guidelines for sUAS users. The gun itself appears to be firing into an offscreen hillside – a sensible precaution. If the only justification for the FAA’s investigation of [Austin]’s video is FAR 91.15, he’s on easy street.

Police LiDAR Tear Down

Most police departments made a big switch from RADAR to LiDAR after consumers starting buying RADAR detectors. A lot of those LiDAR units are now out there on the surplus market. If you don’t have $500 or so to buy a LiDAR gun just to see what makes it tick, you are in luck. [Alexei Polkhanov] spent an hour tearing down a  UltraLyte LTI 20-20 LR 100 so you don’t have to.

An hour seems like a lot for a tear down video, but [Alexei] speeds up through the boring parts, and spends a lot of time talking about the optics and how the device works (with a lot of hand drawn diagrams). He also puts it back together and connects  a scope to show the electronic operation of the device.

He mentions the display and control board uses a serial interface to talk to the controller board. There is also an unpopulated header on the main board that is clearly a serial port, probably for reprogramming the onboard microcontroller. With a little reverse engineering work, this LiDAR gun ought to be highly hackable.

In addition to the display and control board, the unit contains a high voltage supply for the laser and the photodiode. Making a power supply to drive the laser that is clean enough not to disturb the sensor is one of the design drivers and it shows. The power supply is a large and complex board by comparison to the other boards in the system.

Continue reading “Police LiDAR Tear Down” →

A Bridge Made Of Aircraft Carriers Will Make [William Gibson] Proud

If you’ve ever visited the Puget Sound (the area in and around Seattle, Washington) one thing becomes clear very quickly; It’s not easy to get around when there’s water everywhere. Perhaps that’s why Washington State operates the largest ferry system in all of the U.S., carrying about 23 million passengers each year. It’s not uncommon here to drive (or walk) onto a ferry for a nice boat ride before getting to wherever you need to be.

Another thing the Puget Sound has is naval ship yards. The U.S. Navy has a strong presence here. It’s where many submarines and aircraft carriers come for regular maintenance, as well as decommissioned ships that are stripped of their top secrets parts and nuclear bits. At any given time there can be four or five “slightly used, previously owned” massive aircraft carriers that are that are considered to be in the “reserve fleet” (that is, they can be brought back into service in the case of war.) But usually after a few years pass, and a new carriers are built, the Pentagon will send the floating air field to be dismantled.

Well, someone put two and two together and came up with the idea to use them as a floating bridge – and it’s an interesting hack indeed. Currently the State of Washington is studying the idea, but hasn’t made any firm plans just yet. They have their eye set on a span of water that would need 2-3 aircraft carriers to cover, and that is near the Puget Sound Naval Shipyard. The massive size and over hangs of the ships will still allow for tidal moment, and for local sail boats and pleasure craft to pass between. The hope is that it will be both a traffic solution, and a tourist attraction; not to mention preserving 50 year old ships, that are in many cases, are part of naval history.

We’re not sure if such an idea is practical or not, but our inner Top Gun “Maverick” would love to see such a hack pulled off. And it’s really hard not to make the association with some of the locales imagined in [William Gibson’s] epic work. Will we see the should-be-science-fiction bridge become real? Ooooh how we hope so!

[via dailymail.co.uk]

29 Year Old Apple Computer Finally Gets An OS Update

The Apple IIGS is the 16 bit upgrade to the popular 8 bit Apple II computer line, and with its massive boost in graphics, an Ensoniq sound system, and backwards compatibility with the 8 bit machines makes this box desirable to many retro enthusiast. The last OS update, 6.0.1, was released over 22 years ago. While it worked well for the early 90s, it was by no means perfect.

Last Sunday, a post popped up on callapple.org, announcing Apple IIgs System 6.0.2. Updates include a driver for the unreleased Apple II Ethernet card,  fixes various bugs in the file system translation system, various bugfixes to existing system programs,  fast drawing and animation tools, and of course an update to the finder to show the new revision number.

With a hope for even more bug fixes in a possible 6.0.3 revision its good to see people still giving the old Apple II line some love, as the old Apples don’t have as large of a following as their Atari and Commodore brethren.

How To Build A ProxyHam Despite A Cancelled DEFCON Talk

A few days ago, [Ben Caudill] of Rhino Security was scheduled to give a talk at DEFCON. His project, ProxyHam, is designed for those seeking complete anonymity online. Because IP addresses can be tied to physical locations, any online activities can be tracked by oppressive regimes and three letter government agencies. Sometimes, this means doors are breached, and “seditious” journalists and activists are taken into custody.

With the ProxyHam, the link between IP addresses and physical locations is severed. ProxyHam uses a 900MHz radio link to bridge a WiFi network over miles. By hiding a ProxyHam base station in a space with public WiFi, anyone can have complete anonymity online; if the government comes to take you down, they’ll first have to stop at the local library, Starbucks, or wherever else has free WiFi.

[Ben Caudill] will not be giving a talk at DEFCON. It wasn’t the choice of DEFCON organizers to cancel the talk, and it wasn’t his employers – [Ben] founded and is principal consultant at Rhino Security. The talk has been killed, and no one knows why. Speculation ranges from National Security Letters to government gag orders to a far more pedestrian explanations like, “it doesn’t work as well as intended.” Nevertheless, the details of why the ProxyHam talk was cancelled will never be known. That doesn’t mean this knowledge is lost – you can build a ProxyHam with equipment purchased from Amazon, Newegg, or any one of a number of online retailers.

Continue reading “How To Build A ProxyHam Despite A Cancelled DEFCON Talk” →