Last week we showed you the ingenious hard drive enclosure made from a broken Game Boy. We caught up with [_n3o_], the person responsible for this mod, and he was nice enough to share some pictures of the inside of the project. Let’s get down to business and take a look. Continue reading “Game Boy HDD Update: The Guts”
[youtube=http://www.youtube.com/watch?v=QNBg_jWjBmI]
When we first posted [Matthias_H]’s USB reader for SNES game carts, it was met with enthusiasm. The snega2usb allows you to play SNES and Sega games on your pc right off the cartridge. The latest revision is even more amazing than the first. [Matthias] has added the ability to read Sega Genesis/Mega Drive cartridges as well as the ability to save games directly to the cartridge. The board has also been updated from the rats nest it used to be to a smart looking dual sided PCB. So far [Matthias] hasn’t had any trouble reading cartridges, even ones with the SuperFX chips. [Matthias] also launched a site for the project where the lastest information on its development can be found. [Matthias] is getting close to a production version which will feature better firmware, console quality connectors and a shiny case.
So, you hacked your DSI did you? Let me guess, you ran a flash cart. No? You probably added some LEDs then right? No? You must be pretty hard core, did you add a NES controler? No? Well what did you do?
We still have no idea what this guy is doing. But he is doing it very meticulously. We found [Micah Dowty]’s photo stream on flicker and we were instantly pulled in. He has done some extensive modifications to his DSI. He has spread its innards for all to see and begun hacking. It appears as though most of this is for memory dumps and direct access to the RAM in the unit, but frankly we just want to stare at these pictures.
[_n3o_] put together a nice external storage mod by fitting a 2.5″ drive into a broken Game Boy. This mod fooled quite a few people because it appears that the device still plays games with the drive stuffed inside of it. Sadly, this is not the case. The reflective backing has been removed from the screen and replaced by a piece of paper with a graphic printed on it. The LED from the hard drive was moved to the battery indicator for the Game Boy for added realism. There is no build log for this project but [_n3o_] did give a short explanation of it in a forum post. You can see two more pictures of the project after the break. Continue reading “80 Gig Drive Inside A Game Boy”
[youtube=http://www.youtube.com/watch?v=uwxGQhtf4uU]
Going even further back in time than 4th gen, [Kevin] tipped us off to this project by [Hunter Davis]. It is a collection of software mods for Zipit’s Z2 instant messenging device. Some of them include allowing it to run (ports of) the Fluxbox window manager, FCE Ultra NES emulator, and (most impresively) the Java framework. The next leap in development, a SNES emulator optimized for the Zipit, is in the works. The Z2 runs Linux out of the box. This means you no longer have to reflash the device to add software, such as DOSbox (also introduced to the Zipit by [Hunter Davis]). Be sure to check out the video demo of FCE Ultra on the Z2 above.
[youtube=http://www.youtube.com/watch?v=HBDYbRxYax4]
Surprisingly the Xbox 360 hasn’t seen a lot of homebrew action. [tmbinc] has taken it upon himself to port the Snes9x emulator to it. There’s no pretty GUI, and its not running on top of linux or anything. This is native, directly to the hardware emulation. He believes this is the first to do so. Unfortunately, it will not work on the most up to date Xbox 360s.
[thanks xb0xguru]
[youtube=http://www.youtube.com/watch?v=YkuDaVadyOU]
[Miltron] dropped us a tip about his NES workbench. Knowing that when you get frustrated with whatever project you are beating your head against, you need an outlet, [Miltron] decided to build some relaxing NES fun into his workbench. He’s using a NES on a chip though any multi game-in-a-controller setup should work. He has gutted a PSone LCD and mounted it all together nicely so he can game at any moment. You might recall one of [Miltron]’s earlier projects, Das Uber Airsoft Turret. How long will it be before we see integrated LCDs into our toolbox lids or workbenches from the factory?
