Humans And Balloon Hands Help Bots Make Breakfast

Breakfast may be the most important meal of the day, but who wants to get up first thing in the morning and make it? Well, there may come a day when a robot can do the dirty work for you. This is Toyota Research Institute’s vision with their innovatively-trained breakfast bots.

Going way beyond pick and place tasks, TRI has, so far, taught robots how to do more than 60 different things using a new method to teach dexterous skills like whisking eggs, peeling vegetables, and applying hazelnut spread to a substrate. Their method is built on generative AI technique called Diffusion Policy, which they use to create what they’re calling Large Behavior Models.

Instead of hours of coding and debugging, the robots learn differently. Essentially, the robot gets a large flexible balloon hand with which to feel objects, their weight, and their effect on other objects (like flipping a pancake). Then, a human shows them how to perform a task before the bot is let loose on an AI model. After a number of hours, say overnight, the bot has a new working behavior.

Now, since TRI claims that their aim is to build robots that amplify people and not replace them, you may still have to plate your own scrambled eggs and apply the syrup to that short stack yourself. But they plan to have over 1,000 skills in the bag of tricks by the end of 2024. If you want more information about the project and to learn about Diffusion Policy without reading the paper, check out this blog post.

Perhaps the robotic burger joint was ahead of its time, but we’re getting there. How about a robot barista?

Continue reading “Humans And Balloon Hands Help Bots Make Breakfast”

DIY Coffee Gripper

Here at Hackaday, we love it when people make home brew versions of elaborate, expensive, and technical equipment. By gathering up some coffee grounds, a balloon, some plastic tubing, and his lungs, [Carlos] has provided a good how-to on making your own coffee grounds robotic hand. Inspired by the U. Chicago, Cornell, and iRobot Collaboration we previously covered, he is one robot and a vacuum pump away from having their setup. Check out his blog for a list of components as well as a couple hints to help the build go smoothly. Be sure to check out the video after the break.

[via Make]

Continue reading “DIY Coffee Gripper”

Robot Gripper Uses Coffee To Pick Up Anything

Picking up a raw egg is not something we’d think a robot gripper would be good at. But this model uses a bulbous tip instead of claw, which makes crushing the object less of a concern.

That tip is kind of like a balloon. It is stretched full with coffee grounds but air can also be pumped in and sucked out. When it comes time to grip an object, a bit of air is pumped in and the bulb is pressed down on its target. Once in place all of the air is sucked out, locking the coffee grounds around the object. Take a look after the break to see just how many things can be gripped with this technique.

Now the real question, can it bring me a beer?

Continue reading “Robot Gripper Uses Coffee To Pick Up Anything”

Cosmic Ray Detection At Starbucks?

Want to see cosmic rays? You might need a lot of expensive exotic gear. Nah. [The ActionLab] shows how a cup of coffee or cocoa can show you cosmic rays — or something — with just the right lighting angle. Little bubbles on the surface of the hot liquid tend to vanish in a way that looks as though something external and fast is spreading across the surface.

To test the idea that this is from some external source, he takes a smoke detector with a radioactive sensor and places it near the coffee. That didn’t seem to have any effect. However, a Whimhurst machine in the neighborhood does create a big change in the liquid. If you don’t have a Whimhurst machine, you can rub a balloon on your neighbor’s cat.

Continue reading “Cosmic Ray Detection At Starbucks?”

Supercon And Soylent Green

The 2023 Hackaday Supercon is all done and dusted, and we’re still catching up on our sleep. I couldn’t ask everyone, but a great time was had by everyone I talked to. It’s honestly a very special crowd that shows up in Pasadena every November, and it’s really the attendees who make it what it is. We just provide the platform to watch you shine. Thank you all!

It all started out on Friday with an open day of chilling out and badge experimentation. Well, chill for those of you who didn’t have a bug in their badge code, anyway. But thanks to some very keen observation and fantastic bug reports by attendees, Al and I figured out what we’d done and pushed a fix out to all 300 of the badges that were given out on the first day. And thanks to the remaining 200 folks who walked in the next day, who fixed their own badges at Tom’s Flashing Station.

From then on, it was one great talk after another, punctuated by badge hacks and all the other crazy stuff that people brought along with them to show off. For me, one of the highlights was on Sunday morning, as the Lightning Talks gave people who were there a chance to get up and talk about whatever for seven minutes. And subjects ranged from a mad explosive propane balloon party, to Scotty Allen’s experience with a bad concussion and how he recovered, to a deep dive into the world of LED strands and soft sculptures from our go-to guru of blinkiness, Debra [Geek Mom] Ansell.

Supercon first-timer Katie [Smalls] Connell gave a phenomenal talk about her wearable LED art things, Spritelights. These are far from simple art pieces, being a combination of medical adhesive, home-mixed Galinstan – a metal alloy that stays flexible at human body temperature, and soon even flexible printed batteries. That this whole project hit us without warning from out of the audience just made it more impressive.

And these were just the folks who stepped up on stage. The true story of Supercon also belongs to all the smaller conversations and personal demos taking place in the alley or by the coffee stand. Who knows how many great ideas were hatched, or at least seeds planted?

So as always, thank you all for coming and bringing your passions along with. Just like Soylent Green, Supercon is made of people, and it wouldn’t be half as yummy without you. See you all next year. And if you’re thinking of joining us, get your tickets early and/or submit a talk proposal when the time comes around. You won’t meet a more warm and welcoming bunch of nerds anywhere.

N-scale model railroad hidden in wall art

Hidden Model Railroading Taken To The Nth Scale

Most of us would be pretty happy with ourselves if we made one of those neat “epoxy river” types of art for our home. Not so with prolific maker [Peter Waldraff]. [Peter] is a skilled craftsman with a penchant for hiding model railroads in everyday furniture and fixtures. To this end, he’s created what he calls the Hidden Epoxy Railroad, which you can see in the video below the break.

The project starts with basic woodworking to build the frame, hinges, and the hinged epoxy river with its colored epoxy pour. Instead of stopping there, [Pete] continued by building a full N scale model railroad into the piece. The frame doubles as a backdrop complete with a beautifully painted scene with what we’re guessing is an N scale hot air balloon, too.

Of course, the skeptics among us might doubt whether the model railroad is fully hidden when closed. But one detail that Pete shared with us is that his wife never knew about the train portion of the build until their daughter pointed it out. She thought it was merely a piece of art for the dining room. Truly a great hack!

The entire build is documented on [Pete]’s YouTube channel, with its own 15 part build series. It’s definitely worth checking out. We’ve covered one of [Pete]’s hidden railroad builds before, so make sure you check that out, too!

Continue reading “Hidden Model Railroading Taken To The Nth Scale”

Maker Faire NY: Programmable Air

At this year’s World Maker Faire in New York City we’re astonished and proud to run into some of the best projects that are currently in the running for the Hackaday Prize. One of these is Programmable Air, from [Amitabh], and it’s the solution to pneumatics and pressure sensing in Maker and IoT devices.

The idea behind Programmable Air is to create the cheapest, most hacker-friendly system for dealing with inflatable and vacuum-based robotics. Yes, pneumatic robotics might sound weird, but there’s plenty of projects that could make use of a system like this. The Glaucus is one of the greatest soft robotic projects we’ve ever seen, and it turns a bit of silicone into a quadruped robot with no moving parts. The only control you have over this robot is inflating one side or the other while watching this silicone slug slowly crawl forward. This same sort of system can be expanded to a silicone robot tentacle, too.

On display at the Programmable Air booth were three examples of how this device could be used. The first was a simple pressure sensor — a weird silicone pig with some tubing coming out of the nostrils was connected to the Programmable Air module. Squeeze the pig, and some RGB LEDs light up. The second demo was a balloon inflating and deflating automatically. The third demo was a ‘jamming gripper’, basically a balloon filled with rice or coffee grounds, connected to a pump. If you take this balloon, jam it onto an odd-shaped object and suck the air out, it becomes a gripper for a robotic arm. All of these are possible with Programmable Air.

Right now, [Amitabh] has just finalized the design and is getting ready to move into mass production. You can get some updates for this really novel air-powered robotics platform over on the main website, or check out the project over on Hackaday.io.