Month: September 2016

Calling All Procrastinators

September 30, 2016 by 13 Comments

We have your number… you’re one who likes to while away the daylight hours, then make a mad effort throughout the night to finish everything before the sun again rises. In fact, that describes a lot of us Hackaday writers.

Put those well-honed cramming skills to good use this weekend, because Monday morning is the deadline to enter the 2016 Hackaday Prize. The current challenge is to show us your Assistive Technology. Prototyping some hardware to make life a little bit better for people dealing with a disability, to help those who are aging in place, to provide more widespread access to health care, and the like. We will pick 20 entries from this challenge to win $1000 each and become eligible for one of the five huge prizes.

Huge prizes you say? We’re talking about a grand prize of $150,000 and a residency at the Supplyframe Design Lab in Pasadena, plus four other cash prizes of $25k, $10k, $10k, and $5k. Twenty final projects have been chosen from each of the first four challenges, and there have already been over 1000 total entries! But your chances of pulling a rabbit out of the hat this weekend are still really good. So far there are just under 200 entries in this final challenge — twenty will move forward on Monday.

Call up your friends and stock up on Red Vines and Red Bull (Club Mate if you can get it). Occupy your hackerspace and get to work. If you are pulling all nighter’s in a bid to take Assistive Technology by storm, make sure you let us know on Twitter so we can follow along.

The HackadayPrize2016 is Sponsored by:

3D Printering: Trinamic TMC2130 Stepper Motor Drivers

September 30, 2016 by 54 Comments

Adjust the phase current, crank up the microstepping, and forget about it — that’s what most people want out of a stepper motor driver IC. Although they power most of our CNC machines and 3D printers, as monolithic solutions to “make it spin”, we don’t often pay much attention to them.

In this article, I’ll be looking at the Trinamic TMC2130 stepper motor driver, one that comes with more bells and whistles than you might ever need. On the one hand, this driver can be configured through its SPI interface to suit virtually any application that employs a stepper motor. On the other hand, you can also write directly to the coil current registers and expand the scope of applicability far beyond motors.

Continue reading “3D Printering: Trinamic TMC2130 Stepper Motor Drivers” →

A Beautiful Turntable With A Heart Of Concrete

September 30, 2016 by 23 Comments

On the face of it, playing a vinyl record is a simple process. You simply mount it on a turntable rotating at the right speed, and insert a needle into the groove. A learning exercise for youngsters used to be a passable attempt at a record player on the kitchen table with a pencil, a large cork, a sharpened matchstick, and a piece of paper. It sounded awful, but it demonstrated well how the audio was recorded.

If you have ever looked into the operation of a more conventional turntable though you’ll know that a little more care and attention is needed. There are many factors which affect the quality of the sound, and you quickly become obsessive about tracking, and sources of the tiniest vibration. Someone who has followed this path is [Mjhara], who has made a very high quality turntable. There is an unusual choice in this project: the tonearm is part of the build rather than fitting a commercial item like most turntable projects.

balanced-with-shotThe platter is machined from a piece of rosewood, weighted and balanced with lead shot, and laminated between two sheets of brass. It sits on a bearing aided by a ring of opposing magnets, and is belt driven by a two-phase induction motor. The base of the turntable is cast as a single piece of concrete, the idea being that the extra weight will aid the damping of vibrations. The tonearm is machined from a piece of wood, and its pivot from brass. The tonearm bearing is a ballpoint pen, a surprising yet inspired choice .

Sometimes audiophiles take their quest for better sound to extremes, and justification for their expenditure can be very subjective. But [Mjhara] assures us that this turntable has an exceptionally good sound, and it is certainly a thing of beauty. Full details are in the Imgur gallery embedded below the break.

Continue reading “A Beautiful Turntable With A Heart Of Concrete” →

Amazon Offers $2.5M To Make Alexa Your Friend

September 30, 2016 by 25 Comments

Amazon has unveiled the Alexa Prize, a $2.5 Million purse for the first team to turn Alexa, the voice service that powers the Amazon Echo, into a ‘socialbot’ capable of, “conversing coherently and engagingly with humans on popular topics for 20 minutes”.

The Alexa Prize is only open to teams from colleges or universities, with the winning team taking home $500,000 USD, with $1M awarded to the team’s college or university in the form of a research grant. Of course, the Alexa Prize grants Amazon a perpetual, irrevocable, worldwide, royalty-free license to make use of the winning socialbot.

It may be argued the Alexa Prize is a competition to have a chat bot pass a Turning Test. This is a false equivalency; the Turing Test, as originally formulated, requires a human evaluator to judge between two conversation partners, one of which is a human, one of which is a computer. Additionally, the method of communication is text-only, whereas the Alexa Prize will make use of Alexa’s Text to Speech functionality. The Alexa Prize is not a Turing Test, but only because of semantics. If you generalize the phrase, ‘Turing Test’ to mean a test of natural language conversation, the Alexa Prize is a Turing Test.

This is not the first prize offered for a computer program that is able to communicate with a human in real time using natural language. Since 1990, the Loebner Prize, cosponsored by AI god Marvin Minsky, has offered a cash prize of $100,000 (and a gold medal) to the first computer that is indistinguishable from a human in conversation. Since 1991, yearly prizes have been awarded to the computer that is most like a human as part of the competition.

For any team attempting the enormous task of developing a theory of mind and consciousness, here are a few tips: don’t use Twitter as a dataset. Microsoft tried that, and their chatbot predictably turned racist. A better idea would be to copy Hackaday and our article-generating algorithm. Just use Markov chains and raspberry pi your way to arduino this drone.

Hackaday Prize Entry: Explore M3 ARM Cortex M3 Development Board

September 29, 2016 by 19 Comments

Even a cursory glance through a site such as this one will show you how many microcontroller boards there are on the market these days. It seems that every possible market segment has been covered, and then some, so why on earth would anyone want to bring another product into this crowded environment?

This is a question you might wish to ask of the team behind Explore M3, a new ARM Cortex M3 development board. It’s based around an LPC1768 ARM Cortex M3 with 64k of RAM and 512k of Flash running at 100MHz, and with the usual huge array of GPIOs and built-in peripherals.

The board’s designers originally aimed for it to be able to be used either as a bare-metal ARM or with the Arduino and Mbed tools. In the event the response to their enquiries with Mbed led them to abandon that support. They point to their comprehensive set of tutorials as what sets their board apart from its competition, and in turn they deny trying to produce merely another Arduino or Mbed. Their chosen physical format is a compact dual-in-line board for easy breadboarding, not unlike the Arduino Micro or the Teensy.

If you read the logs for the project, you’ll find a couple of videos explaining the project and taking you through a tutorial. They are however a little long to embed in a Hackaday piece, so we’ll leave you to head on over if you are interested.

We’ve covered a lot of microcontroller dev boards here in our time. If you want to see how far we’ve come over the years, take a look at our round up, and its second part, from back in 2011.

The HackadayPrize2016 is Sponsored by:

Earliest Recorded Computer Music Restored

September 29, 2016 by 20 Comments

You want old skool electronic music? How about 1951?

Researchers at the University of Canterbury in New Zealand have just restored what is probably the oldest piece of recorded, computer-generated music. Recorded in 1951, the rendition of “God Save The King”, “Baa-Baa Black Sheep” and “In The Mood” was produced by a computer built by none other Alan Turing and other researchers at the Computing Machine Research Laboratory in Manchester.

These phat beats were captured by the BBC for broadcast on an acetate disk that the researchers found in an archive. They sampled and restored the recording, fixing the rather poor quality recording to reproduce the squawky tones that the computer played. You can hear the restored recording after the break.

It halts apparently unexpectedly in the middle of a stanza, sounds essentially horrible, and goes out of tune on the higher notes. But you gotta learn to crawl before you can walk, and these are the equivalent of the grainy 8mm films of baby’s first steps. And as such, the record is remarkable.

Via ABC News

Continue reading “Earliest Recorded Computer Music Restored” →