Lolo’s (perfect Moment) Alarm Clock

July 17, 2010 by Jakob Griffith 20 Comments

[youtube http://www.youtube.com/watch?v=CphsgESZGcE&feature=player_embedded%5D

It seems everybody has a different interpretation of the perfect alarm clock. [Loic Royer’s] alarm clock is not the loudest, or the smartest, but does have some interesting features. By monitoring several environmental factors like temperature, air quality, humidity, dew point, and your own sleep patterns, this alarm clock can determine the best moment in the morning to wake you up.

The main sensor is a wireless accelerometer with the theory being: the more you move in your sleep, the closer you are to a conscious state. The other sensors assist in picking the perfect moment, and awaken you with the sound of birds chirping.

For now all we have is the source code and the list of hardware, but for anyone wanting to try, a circuit diagram wouldn’t be too hard to figure out on your own. Check after the rift for some more videos. Continue reading “Lolo’s (perfect Moment) Alarm Clock” →

3D Printing With Chemicals

July 15, 2010 by Jakob Griffith 45 Comments

From the horse’s mouth,

“In this lithography experiment light creates free radicals from phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide which induce polymerization of 1,6-hexanediol diacrylate.”

Or for those without a Chemical Engineering degree, light from a (high resolution) projector interacts with a special liquid, producing a hard polymer on the surface. A platform within the liquid is lowered, taking the layer of polymer with it. Shine the projector again to produce another layer: lather, rinse, repeat. Long story short, an atypical 3D printer using light on a very small scale.

You get the chemicals and lab equipment, we’ll get the laptop and projector, and for goodness sake [Jimmie] stop bumping the table.

[Thanks Tomas]

3 Camera Booms For Your Wednesday Afternoon

July 14, 2010 by Jakob Griffith 5 Comments

[Andrew] tipped us off about his Cable Cam built out of some lumber and clothes line. It is small enough to fit into a backpack, includes a safety line and the camera can pan and tilt. A future version is planned with a small remote motor to move the trolley more effectively.

[Andrew] accidentally linked us to his other Camera Crane, taking the same ‘cheap yet effective’ approach as his Cable Cam. Once again, just some lumber and creative engineering are used to pull this one off.

For those without the ability to weld, check out [Bill Van Loo’s] all wood version of a Camera Crane. Same parallelogram design, without remote video output or central pivot.

Shred Air With Theremin Hero

July 13, 2010 by Jakob Griffith 16 Comments

[youtube http://www.youtube.com/watch?v=sBhOB7CfUoY%5D

Remember those Ebay auctions of air guitars going for several thousands of dollars? We don’t either, but Theremin Hero (more info in the YouTube description) is about as legit as you can get to actually rocking on nothing but air.

Much like using a theremin to control Mario, the vertical antenna acts as the fret board while the horizontal one detects strumming. Combine the output of the theremin with some custom software (yet to be released) and Guitar Hero and you have Theremin Hero Air Guitar.

[via Bob’s House of Video Games]

Make Your Own Toner Transfer Paper

July 12, 2010 by Jakob Griffith 17 Comments

Who would have thought that some corn starch could be made into toner transfer paper? We’re not sure of the advantages (perhaps its cheaper?), but if you have a lot of time or just love to get sticky [Matthew Sager] shows the proper method for making the paper, printing, and then etching a PCB.

If you’re just getting started making PCBs, we recommend you check out these DIY circuit etching videos to get a better grasp on the printing and etching steps.

Stylin’ HMD

July 8, 2010 by Jakob Griffith 22 Comments

Watch out, these sunglasses are actually a head mounted display. [Staffan] says he’s wanted dataglasses since ’95, but whats currently out there makes the user look ridiculous, and we have to agree. While his forum posts are a little lacking in detail, he’s promised us more info soon. And for now lets us know at least the resolution, well sort of: Its either 480×1280 or 480x427x3, you can be the judge. Update: [Staffan] has clarified “The resolution is 480*1280 true pixels. It is accomplished by spanning the screen across two Kopin CyberDisplay VGA modules.”

Regardless, [Staffan] is looking for help perfecting the glasses, with what in particular we’re not sure, but the project looks promising and we hope he keeps up the good work.

Wear A Helmet, Rollerblades With Attitude

July 8, 2010 by Jakob Griffith 13 Comments

Wireless controller, more powerful custom-made motors, stronger frame, and with a name like DeathBlades, we can’t think of a single reason why you would prefer heel treads, well everyone was young at one time.

[Charleg] has been testing out a slightly new frame, despite having only half the motors necessary, and is getting great results hitting around 23Wh/mi. If you’re looking to build your own, his blog has a post for nearly every aspect of the design.

[Thanks Jerome Demers]