Author: Jenny List

3434 Articles

Just How Is Voyager 2 Going To Sort Out Its Dish Then?

July 31, 2023 by 29 Comments

Anybody who has set up a satellite TV antenna will tell you that alignment is critical when picking up a signal from space. With a satellite dish it’s a straightforward task to tweak the position, but what happens if the dish in question is out beyond the edge of the Solar System?

We told you a few days ago about this exact issue currently facing Voyager 2, but we’re guessing Hackaday readers will want to know a little bit more about how a 50+ year old spacecraft so far from home can still sort out its antenna. The answer lies in NASA Technical Report 32-1559, Digital Canopus Tracker from 1972, which describes the instrument that notes the position of the star Canopus, which along with that of the Sun it can use to calculate the antenna bearing to reach Earth. The report makes for fascinating reading, as it describes how early-1970s technology was used to spot the star by its specific intensity and then keep it in its sights. It’s an extremely accessible design, as even the part numbers are an older version of the familiar 74 logic.

So somewhere out there in interstellar space beyond the boundary of the Solar System is a card frame full of 74 logic that’s been quietly keeping an eye on a star since the early 1970s, and the engineers from those far-off days at JPL are about to save the bacon of the current generation at NASA with their work. We hope that there are some old guys in Pasadena right now with a spring in their step.

Read our coverage of the story here.

The British Government Is Coming For Your Privacy

July 30, 2023 by 77 Comments

The list of bad legislation relating to the topic of encryption and privacy is long and inglorious. Usually, these legislative stinkers only affect those unfortunate enough to live in the country that passed them. Still, one upcoming law from the British government should have us all concerned. The Online Safety Bill started as the usual think-of-the-children stuff, but as the EFF notes, some of its proposed powers have the potential to undermine encryption worldwide.

At issue is the proposal that services with strong encryption incorporate government-sanctioned backdoors to give the spooks free rein to snoop on communications. We imagine that this will be of significant interest to some of the world’s less savoury regimes, a club we can’t honestly say the current UK government doesn’t seem hell-bent on joining. The Bill has had a tumultuous passage through the Lords, the UK upper house, but PM Rishi Sunak’s administration has proved unbending.

If there’s a silver lining to this legislative train wreck, it’s that many of the global tech companies are likely to pull their products from the UK market rather than comply. We understand that UK lawmakers are partial to encrypted online messaging platforms. Thus, there will be poetic justice in their voting once more for a disastrous bill with the unintended consequence of taking away something they rely on.

Header image: DaniKauf, CC BY-SA 3.0.

A Game Boy Camera, Without The Game Boy

July 29, 2023 by 3 Comments

We all know the Nintendo Game Boy camera peripheral, and we’ve seen plenty of hacks for it on these pages over the years. We like [Raphael Boichot]’s camera then, as instead of including a Game Boy or emulating one, it talks directly to the sensor from an RP2040. The result is a standalone camera with slightly better quality than the original, and with near-limitless storage and easy retrieval of pictures.

For us the interesting revelation from this project comes in the light it sheds on the sensor module, the Mitsubishi M64282FP, but it’s no slouch as a camera beside that. There are motion sensor and timelapse modes, as well the ability to take high dynamic range pictures, and as if that’s not enough it also has all the tweakable things you’d expect from a “proper” camera. The oldest adage in photography is that the best camera in the world is the one in your hand, and we’d say that this one’s better than a real Game Boy Camera should the once-in-a-lifetime picture come while you’re holding it.

Of course, a better Game Boy camera needs a better lens, right?

Grab Your ‘Scope’s Screen From The Command Line

July 25, 2023 by 9 Comments

Many of us have oscilloscopes and other instruments with built-in digital interfaces, but how many of us use them? [Andrej Radović] has a Tektronix TDS2022 which can print its screen to any of its various interfaces, and he set about automating the process of acquisition with a Bash script.

The easiest interface to use was the trusty serial port — hardly the fastest but definitely the best supported. But how does one retrieve an image fired down a serial port? Most of the post is devoted to spotting file headers in a Bash script monitoring the serial port, and streaming the result to a local file. There’s a discussion of the various formats supported by the Tek, with an ancient PCX bitmap format being chosen over Postscript for speed. The result is a decent quality screen grab, making the ‘scope that little bit more useful and perhaps extending its life.

Perhaps your instrument isn’t a TEK, but the chances are you can still make it bend to your will from a PC. Try it, with the magic of VISA.

A Vintage Transistor Radio Gets A Repair

July 24, 2023 by 19 Comments

Here in 2023 the field of electronics covers a breathtaking variety of devices and applications, but if we were to go back in time far enough we’d enter an age in which computers were few and far between, and any automated control systems would have been electromechanical at best. Back in the 1950s the semiconductor industry was in relative infancy, and at the consumer end electronics were largely synonymous with radio. [Shango066] brings us a transistor radio from that era, a Jewel TR1 from about 1958, that despite its four-transistor simplicity to our eyes would have been a rare and expensive device when new.

As you’d expect, a transistor radio heading toward its 70th birthday requires a little care to return to its former glory, and while this one is very quiet it does at least work after a fashion. The video below the break is a long one that you might wish to watch at double speed, but it takes us through the now-rare skill of fault-finding and aligning an AM radio receiver. First up are a set of very tired electrolytic capacitors whose replacement restores the volume, and then it’s clear from the lack of stations that the set has a problem at the RF end. We’re treated to the full process of aligning a superhet receiver through the relatively forgiving low-frequency medium of a medium-wave radio. Along the way, he damages one of the IF transformers and has to replace it with a modern equivalent, which we would have concealed under the can from the original.

The video may be long, but it’s worth a look for the vintage parts if not for the quality of radio stations on the air today in California. For many readers, AM broadcast is becoming a thing of the past, so we’re not sure we’ll see this very often.

Continue reading “A Vintage Transistor Radio Gets A Repair” →

Superconducting Tape Leads To A Smaller Tokamak

July 23, 2023 by 80 Comments

Attempts to make a viable nuclear fusion reactor have on the whole been the domain of megabucks projects supported by countries or groups of countries, such as the European JET or newer ITER projects. This is not to say that smaller efforts aren’t capable of making their own advances, operations in both the USA and the UK are working on new reactors that use a novel superconducting tape to achieve a much smaller device.

The reactors in the works from both Oxfordshire-based Tokamak Energy and Massachusetts-based Commonwealth Fusion Systems, or CFS, are tokamaks, a Russian acronym describing a toroidal chamber in which a ring of high-temperature plasma is contained within a spiral magnetic field. Reactors such as JET or ITER are also tokamaks, and among the many challenges facing a tokamak designer is the stable creation and maintenance of that field. In this, the new tokamaks have an ace up their sleeve, in the form of a high-temperature superconducting tape from which those super-powerful magnets can be constructed. This makes the magnets easier to make, cheaper to maintain at their required temperature, and smaller than the low-temperature superconductors found in previous designs.

The world of nuclear fusion is a particularly exciting one to follow in these times of climate crisis, with competing approaches from laser-based devices racing with the tokamak projects to produce the research which will eventually lead to safer carbon-free power. If the CFS or Tokamak Energy reactors lead eventually to a fusion power station on the edge of our cities then it may just be some of the most important work we’ve ever reported.

Steel For Your Fighting Robot

July 23, 2023 by 8 Comments

The job of processing video after a large event must be a thankless one for whichever volunteer upon whose shoulders it falls, and thus it’s not unusual for talks at larger events to end up online much later than the event itself. Electromagnetic Field 2022 was last year, but they have continued to drop new videos. Among the latest batch is one from [Jennifer Herchenroeder], in which she discusses the steel used in her team’s BattleBot, Hijinx (Edit: her EMF talk was cut short due to time pressures, so she re-recorded it in full after the event and we’ve replaced the link. The EMF video meanwhile is here). The result is a fascinating introduction to the metallurgy of iron and steel, and is well worth a watch.

To fully understand the selection of armor steel it’s necessary to start from first principles with iron, to look at its various allotropes, and understand something of how those allotropes form and mix in the steel making and metalworking processes. We’re treated to a full description of the various tempering and hardening processes, before a panel-by-panel rundown of the various steels used by Hijinx.

For a Hackaday writer with a past in robot combat it’s fascinating to see how the design of robots has evolved over the decades since the British Robot Wars, and it’s particularly nice to see the current generation as part of our community. However, if you’ve tempted yourself, bear in mind that it’s not all plain sailing.

Continue reading “Steel For Your Fighting Robot” →