Author: James Hobson

1404 Articles

Light Rider: A Lightweight 3D Printed Electric Motorcycle!

January 29, 2017 by 43 Comments

It sounds like the name of a vehicle in some sci-fi tale, but that fiction is only a short leap from reality. Light Rider is, in fact, an electric motorcycle with a 3D printed frame that resembles an organic structure more than a machine.

Designed by the Airbus subsidiary [APWorks], the largely hollow frame was devised to minimize weight while maintaining its integrity and facilitating the integration of cables within the structure. The frame is printed by melting a sea aluminium alloy particles together into thousands of layers 30 microns thick. Overall, Light Rider’s frame weighs 30% less than similar bikes; its net weight — including motor — barely tips the scales at 35 kg. Its 6 kW motor is capable of propelling its rider to 45 km/h in three seconds with a top speed of 80 km/h, and a range of approximately 60 km — not too shabby for a prototype!

Continue reading “Light Rider: A Lightweight 3D Printed Electric Motorcycle!” →

Snowed-In In The City? The Snow Bike Will Get You Where You Need To Go

January 29, 2017 by 20 Comments

If have ever gone snowmobiling, you may have thought about how to revive that thrill in the more confined atmosphere of an urban environment — to say nothing of their utility. In anticipation of heavy snowfall  over the winter in his hometown, [Ben] stripped the essence of the snowmobile down as an emergency vehicle and reshaped it into the Snow Bike.

This compact, winter transportation solution uses an e-bike controller, a chopped up ski, and a heavy snowblower track and a large RC plane motor for power all strapped onto a modified mountain bike frame. The motor mount is machined aluminum, the track rollers milled out of spare plastic — though they later had to be modified as they tended to get clogged by snow — and the front ski is simply bolted on using some 3″ square tubing.

Due to its small size the Snow Bike looks about as stable as a pocket bike, so perhaps some training tracks and or skis might help in deeper powder. [Ben] also notes that the present motor doesn’t have much power so the rider needs to keep it at full throttle to push through the snow. That said — seeing this thing smoothly cruising around in several inches of snow makes us wish we had one of our own.

If this ride isn’t fast enough for you, check out these rocket-powered winter vehicles.

Continue reading “Snowed-In In The City? The Snow Bike Will Get You Where You Need To Go” →

Camera Restricta Ensures Original Photography

January 28, 2017 by 42 Comments

Proper documentation is important, and when traveling it is commonly achieved via photography. Redundant documentation is often inefficient, and the Camera Restricta — in a commentary on the saturation of photographed landmarks and a recent debate on photographic censorship in the EU — aims to challenge the photographer into taking unique photographs.

Camera Restricta has a 3D-printed body, housing a smartphone for gps data, display and audio output, while an ATTiny85 serves to control the interdicting function of the camera. When the user sets up to take a picture using Camera Restricta, an app running on the phone queries a node.js server that trawls Flikr and Panoramio for geotagged photos of the local area. From that information, the camera outputs a clicking audio relative to the number of photos taken and — if there are over a certain number of pictures of the area — the screen trips a photocell connected to the ATTiny 85 board, retracting the shutter button and locking down the viewfinder until you find a more original subject to photograph.

Continue reading “Camera Restricta Ensures Original Photography” →

The Power Glove Ultra Is The Power Glove We Finally Deserve

January 28, 2017 by 14 Comments

How do you make the most awesome gaming peripheral ever made even more bad? Give it a 21st-century upgrade! [Alessio Cosenza] calls this mod the Power Glove Ultra, and it works exactly as we imagined it should have all those years ago.

The most noticeable change is the 3D-printed attachment that hosts the Bluetooth module, a combination USB charger and voltage booster, and a Metro Mini(ATmega328) board. On top of a 20-hour battery life, a 9-axis accelerometer, gyroscope, and compass gives the Power Glove Ultra full 360-degree motion tracking and upgrades the functionality of the finger sensors with a custom board and five flex sensor strips with 256 possible positions for far more nuanced input. [Cosenza] has deliberately left the boards and wires exposed for that cyberpunk, retro-future look that is so, so bad.

Continue reading “The Power Glove Ultra Is The Power Glove We Finally Deserve” →

Tear Gun Transmutes Emotions Into Firepower

January 27, 2017 by 28 Comments

Frustration is tough to deal with. When driven to the point of tears it’s sometimes a short step to lashing out irrationally. Focus in these situations helps, channeling your frustration into something useful. [Yi-Fei Chen] has done that — quite literally — by designing a gun that fires her shed tears.

The gun’s design manifested following a strenuous midterm presentation. Her insistent tutor drove her to tears as frustration clashed with the deep cultural values of her native Taiwan which prevented her from speaking up against authority.

A silicone cup resting against her cheek collects the tears which flow into a chamber of the gun to be frozen. Removing the safety slide preps the round to be fired by the pressure plate trigger on the gun’s rear. It’s simple and it works — tutors beware.

Continue reading “Tear Gun Transmutes Emotions Into Firepower” →

Smoothly Modernized Nixie Display

January 14, 2017 by 37 Comments

The renaissance of Nixie tube popularity amid the nostalgia surrounding older tech has made them almost prohibitively expensive for individual projects. Seeing an opportunity to modernize the beloved devices, [Connor Nishijima] has unleashed this new, LED edge-lit display that he has dubbed Lixie.

We featured his prototype a few years ago. That design used dots to make up each character but this upgrade smooths that out with sleek lines and a look one would almost expect from a professional device — or at the very least something you’d see in a cyberpunk near-future. The color-changing Neopixel LEDs — moderated by a cleverly designed filter — allow for customization to your heart’s content, and the laser-cut acrylic panes allow for larger displays to be produced with relative ease.

The image above (and the video below) show two revisions of the most recent Lixie prototypes. There is a huge improvement on the right, as the digits are now outlines instead of single strokes and engraved instead of cut completely through the acrylic. The difference if phenomenal, and in our opinion move the “back to the drawing board” effect to “ready for primetime”. [Connor] and his team are working on just that, with a Tindie preorder in place for the first production-ready digits to roll off their line.

Continue reading “Smoothly Modernized Nixie Display” →

Disposable Camera Coil Gun!

January 7, 2017 by 12 Comments

Some of the most enjoyable projects tend to have the terrible drawback of also having the most potential to cause bodily harm, like getting zapped by the capacitor when digging into a disposable camera. But often — if you’re careful — this curiosity pays off and you wind up learning how to make something cool like this coil gun from a camera flash’s capacitor. This handheld launches a small nail, and is packed in a handheld form factor with a light switch trigger.

[LabRatMatt] dispels any illusions of potential harm upfront and then repeatedly urges caution throughout his detailed guide. He breaks down the physics at work while maintaining a lighthearted tone. This coil gun uses a capacitor and charging circuit ripped from a disposable camera — [LabRatMatt] decided to double up with another capacitor that he had on hand from a previous project. The coil was repurposed from an old doorbell, but make sure to use a few hundred windings if you make your own coil. A light switch ended up being suitable for a trigger since it is able to handle the voltage spikes.

When assembled, it almost looks like something you’d expect to see in a post-apocalyptic wasteland, but it works!

Continue reading “Disposable Camera Coil Gun!” →