Empanada Becomes Impractical, Delicious Synth

April 1, 2020 by Zoe Skyforest 20 Comments

Vegemite is an Australian staple – a rich, protein-filled sandwich spread with a strong salty flavor. It serves as a great way to add a little umami to any dish, which is the hottest open secret in Australian cuisine this decade. It also works as a servicable conductive paint, which [Alex] used to make this baked good into a musical device.

The basis of the device is a basic audio example sketch running on an Adafruit Circuit Playground Express. The code was tweaked to play a 7-note C major scale. The PCB was then attached to the empanada with toothpicks through each pad, with the baked good itself seemingly connected to the ground plane. The toothpicks through the pads were then coated with Vegemite, and another toothpick treated the same way and used as a stylus. By touching the toothpick to the empanada and one of the pads, the circuit is made, and a note is played.

It’s an impractical way to go about musical performance, sure. But it is an effective demonstration of foodstuffs used in electronics. Calvin Harris did much the same back in 2009, albeit with humans substituting for the delicious pastry. Video after the break.

Continue reading “Empanada Becomes Impractical, Delicious Synth” →

Chatty Coaster Agitates, In A Friendly Way

March 31, 2020 by Zoe Skyforest 6 Comments

Awkward silences can be highly uncomfortable. Thankfully, they’re a problem that can be solved by technology. Chatty Coaster aims to do just this, detecting pauses in conversation and interjecting with helpful questions to move things along.

The coaster is built around an Arduino Micro, which uses a microphone to detect audio levels in the room. When it detects an extended silence, it then fires off a sound clip using a SparkFun audio breakout board. The questions vary from plain to politically sensitive, so there’s a good chance you could get some spicy conversation as a result. Any talking device runs a risk of being more annoying than helpful, and there’s certainly a risk that Chatty Coaster could fall into this category. Choosing the right content seems key here.

Overall, while this may not be the ultimate solution to boring company, it could get a laugh or two and serves as a good way to learn how to work with audio on microcontrollers. Video after the break.

We’ll admit, when we were reading this one, we thought we had déjà vu. But this one’s a lot less blamey.

Continue reading “Chatty Coaster Agitates, In A Friendly Way” →

DIY Bagpipes Made From Common Household Items

March 30, 2020 by Zoe Skyforest No comments

The bagpipes, most commonly seen in their Great Highland form from Scotland, are a loud and imposing musical instrument. Known for being difficult to practice quietly, they’re not the ideal thing to pick up in these times of quarantine and isolation. But, if you must, here’s how you can craft your own at home!

A garbage bag is used as the air bag for this design, readily available and easy to work with. A recorder is then installed into the bag to act as the chanter – the part of the instrument with with pitch is controlled by finger position. A second recorder is then installed as a drone, which produces the continuous harmonizing note typical of bagpipes. A pair of pens are used to create the blowpipe which supplies air to the instrument. Everything is then sealed up with tape and you’re ready to go!

While it’s not a great facsimile of an authentic Scottish bagpipe, it does work in the same way and make some noise. It would be interesting to see a talented player handle such a makeshift piece. Alternatively, consider some of the alternative DIY instruments we’ve featured before. Video after the break.

Continue reading “DIY Bagpipes Made From Common Household Items” →

Maxing Out Browser Tabs With 2TB Of Memory

March 30, 2020 by Zoe Skyforest 39 Comments

Tabbed browsing was a gamechanger, allowing users to effectively browse multiple websites at once without losing context. It proved a better solution than using multiple windows, and was an efficiency boon celebrated by all. Many of us are tab fiends, opening great numbers at a time as a habitual part of our workflow. [Linus] decided to find out just how many he could open on a system armed with a full 2TB of RAM.

As may be obvious, setting up a system with 2TB of RAM is no mean feat. Special server-grade RAM modules were sourced, packing 128GB of RAM each, set up for ECC operation. Packing out 16 slots, there’s a performance penalty to addressing so much RAM with a single CPU, but for memory-intensive work, it’s worthwhile. The CPU in question is an AMD 64-core processor, providing plenty of grunt for the task at hand.

In testing, the machine began to slow down long before the RAM was full. Beyond 5000 tabs, things began to crawl. At 6000 tabs, it was simply impractical to open more, with the machine taking a full 26 seconds to respond to a single click. Memory usage at this point was just 200GB, suggesting that software limitations were getting in the way of opening yet more tabs.

While it’s not a useful measure of anything important, it’s fun to explore the limits nonetheless. We’ve seen their projects before, such as this original Xbox casemod. Video after the break.

Continue reading “Maxing Out Browser Tabs With 2TB Of Memory” →

SOLID Promises A New Approach To How The Web Works

March 30, 2020 by Zoe Skyforest 71 Comments

As it stands on the modern Internet, your data is no longer your own. Your emails, photos, and posts all live on servers owned by large corporations. Their policies give them access to your data, which is mined to generate advertising revenue. And if you want your data back, there are innumerable hoops to jump through. Want it deleted entirely? Good luck.

Tim Berners-Lee, original creator of the World Wide Web, is behind the project.

Sir Tim Berners-Lee, as the original creator of what became the Web, has drawn issue with the current state of play. To move the ball on the issue, he’s been working on a design for decentralized internet and the efforts have led to the establishment of the Solid project. The goal is to rectify online privacy and ownership issues and give users greater control over their personal data.

The big question is how do you do that? When SOLID was announced last year there were few if any details on the approach taken by the program. But since then, more details have surface and you can even take an early version of the program for a spin. Let’s take a look.

Continue reading “SOLID Promises A New Approach To How The Web Works” →

Can You Print With Highlighter Ink?

March 29, 2020 by Zoe Skyforest 30 Comments

With huge swathes of people either out of work or working from home, many are now attempting all manner of exciting or silly projects in their downtime. [Emily Velasco] is no exception. She decided to explore the feasability of printing with highlighter ink.

The hack starts with a rather ancient inkjet printer, so old that it works with tractor feed paper. [Emily] set about gutting several highlighter pens and squeezed out the ink reservoirs into a ladle. The printer’s ink cartridge was then filled with the fluid, and a test print was fired off. Upon initial extraction, it appears blank. However, with the aid of a UV light, the printed pattern is revealed. It appears that the inkjet is printing a very faint image, such that the system almost works as an “invisible ink”.

It’s a fun little hack with an old printer, made easier as it lacks the DRM of newer models. It’d probably be quite achievable with a dot-matrix, too. If you’re similarly tinkering in the innards of your peripherals, be sure to let us know. Video after the break.

Continue reading “Can You Print With Highlighter Ink?” →

NIH Approved 3D-Printed Face Shield Design For Hospitals Running Out Of PPE

March 29, 2020 by Zoe Skyforest 108 Comments

As the world faces a pandemic of monumental proportions, hospitals have been hit hard. The dual problems of disrupted manufacturing and supply chains and huge spikes in demand have led to many medical centres running out of protective gear. Makers have stepped up to help in many ways by producing equipment, with varying results. [Packy] has shared a link to a 3D-printable face shield that, unlike some designs floating around, is actually approved by the National Institute of Health in the USA.

The shield consists of a 3D printed headband, which is then coupled with a transparent piece of plastic for the face shield itself. This can be lasercut, or sourced from a document cover or transparency sheet. The design is printable in PLA or a variety of other common materials, and can be assembled easily with office supplies where necessary.

The design is available from the NIH here. (Update: 4/1/2020 here’s an alternate link as original link seems to be suffering from heavy server load) For those eager to help out, it’s important to do so in an organised fashion that doesn’t unduly take resources away from healthcare professionals trying to get an important job done. We’ve seen other hacks too, such as these 3D printed ventilator components being rushed into service in Italy.